Sulphur dyes on nylon 6,6—part 1: the effects of temperature and pH on dyeing
Source abstract
Abstract
Abstract Nylon 6.6 was dyed with five commercial sulphur dyes at different pH values and various temperatures. It was found that over the pH range 6–12, maximum colour strength was achieved at pH 7 and the colour of the dyeings was influenced by the pH at which dyeing had been carried out. The latter observation was explained in terms of the effect of pH on the state of reduction of the dyes and their subsequent oxidative condensation. The five dyes varied in terms of the effect of dyeing temperature, over the range 50–120 °C, on colour strength. Generally, within the range 70–98 °C, temperature had little effect on the colour of the dyeings whereas both lower dyeing temperatures (50 and 60 °C) and, especially, higher temperatures (110 and 120 °C) resulted in colour change. In terms of wash fastness, dyeing temperature had little influence on shade change or staining of adjacent multifibre material. With the exception of the black dye used, the dyeings displayed poor fastness to light; dyeing temperature had little effect on light fastness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dyeing and Modifying Textile Fibers · Microplastics and Plastic Pollution
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. Burkinshaw · Dyes and Pigments · 2000 · 45 · 6510.1016/S0143-7208(00)00003-6 ↗
2. Vogel · 1944
3. Standard methods for the determination of the colour fastness of textiles and leather, 5th ed. Society of Dyers and Colourists; 1990.
4. Senior C. In: Shore J, editor. Cellulosics dyeing. Bradford: Society of Dyers and Colourists; 1995.