3D printing thermoplastic vulcanizates: Current limitations, innovative solutions, and emerging applications
Source abstract
Abstract
Thermoplastic vulcanizates (TPVs) are a class of thermoplastic elastomers (TPEs) that achieve a balance between rubber elasticity and thermoplastic processability, which might position them as a sustainable potential replacement for conventional thermoset rubbers. This review covers current state-of-the-art 3D printing TPVs, focusing on the challenges and prospects associated with Material Extrusion (MEX) Methods. Dynamic vulcanization (DV) in processing TPVs increases the dispersion and crosslinking of the elastomeric phase, which might improve both mechanical properties and recyclability. However, the primary obstacles in 3D printing TPVs include filament buckling, phase incompatibility, and high melt viscosity, leading to poor printability and mechanical defects. While there is extensive research on TPVs, these challenges completely prevent their use in additive manufacturing (AM) methods. Various strategies are presented as potential solutions, including adjusting the crosslinking density, incorporating compatibilizers, and using alternative printing methods. While 3D printing of TPVs remains challenging, advancement in material formulation and AM techniques could unlock their full potential in cutting-edge technologies and a greener future. The study highlights the importance of continued research into TPV-based filaments, direct pellet printing, and 4D printing to expand their applications in automotive, biomedical, and soft robotics fields.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Additive Manufacturing and 3D Printing Technologies · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Determination of the viscoelastic properties of elastomeric materials by the dynamic indentation method10.1016/j.polymertesting.2003.10.006 ↗
2. Polymer design for 3D printing elastomers: recent advances in structure, properties, and printing10.1016/j.progpolymsci.2019.101144 ↗
3. Odian · 2004
4. Introduction to elastomers
5. Biosourced Janus molecules as Silica coupling agents in elastomer composites for tires with lower environmental impact10.1021/acssuschemeng.2c04617 ↗
6. Elastomer-based skins for morphing aircraft applications: effect of biaxial strain rates and prestretch10.1016/j.polymertesting.2022.107655 ↗
7. Catalyst free silicone sealants that cure underwater10.1002/adfm.202000737 ↗
8. An active-damping-compensated magnetorheological elastomer adaptive tuned vibration absorber10.1177/1045389X10375485 ↗
9. 3D printing of soft robotic systems10.1038/s41578-018-0002-2 ↗
10. Highly stretchable and sensitive strain sensor based on silver nanowire-elastomer nanocomposite10.1021/nn501204t ↗
11. Highly efficient self-healable and robust fluorinated polyurethane elastomer for wearable electronics10.1016/j.cej.2021.133081 ↗
12. Soft biological materials and their impact on cell function10.1039/B610522J ↗
13. A comprehensive review on advancements of elastomers for engineering applications
14. Elastic vitrimers: beyond thermoplastic and thermoset elastomers10.1016/j.matt.2022.04.007 ↗
15. Proposal to reuse rubber waste from end-of-life tires using thermosetting resin10.3390/su11246997 ↗
16. Recent advances in biodegradable polymers for sustainable applications10.1038/s41529-022-00277-7 ↗
17. The global threat from plastic pollution10.1126/science.abg5433 ↗
18. Evaluation of the viability of 3D printing in recycling polymers10.3390/polym16081104 ↗
19. Effect of multiple recycling on thermo-mechanical and rheological behaviour of PP/EPDM thermoplastic vulcanizates10.1007/s10924-023-03042-2 ↗
20. Automotive applications of thermoplastic vulcanizates10.1002/app.49181 ↗
21. Stretchable conductors of multi-walled carbon nanotubes (MWCNTs) filled thermoplastic vulcanizate (TPV) composites with enhanced electromagnetic interference shielding performance10.1016/j.compscitech.2020.108195 ↗
22. Conductive thermoplastic vulcanizates (TPVs) based on polypropylene (PP)/ethylene-propylene-diene rubber (EPDM) blend: from strain sensor to highly stretchable conductor10.1016/j.compscitech.2016.04.001 ↗
23. Highly stretchable conductive thermoplastic vulcanizate/carbon nanotube nanocomposites with segregated structure, low percolation threshold and improved cyclic electromechanical performance10.1039/C7TC04501H ↗
24. Polyurethane-polysiloxane copolymer compatibilized SiR/TPU TPV with comfortable human touch toward wearable devices10.1007/s10118-022-2827-9 ↗
25. Selectively located aluminum hydroxide in rubber phase in a TPV: towards to a halogen-free flame retardant thermoplastic elastomer with ultrahigh flexibility10.1002/pc.23030 ↗
26. 2024
27. Simultaneous 4D printing and In-Situ foaming for tailoring shape memory behaviors in polylactic acid foams10.1016/j.mfglet.2024.11.005 ↗
28. Additive manufacturing of metamaterials: a review
29. Numerical and experimental investigation of 3D printed tunable stiffness metamaterial with real-time response using digital light processing technology10.1016/j.jmrt.2024.09.059 ↗
30. A review of additive manufacturing of metamaterials and developing trends10.1016/j.mattod.2021.04.019 ↗
31. Additive manufacturing of biomorphic scaffolds for bone tissue engineering10.1007/s00170-021-06773-5 ↗
32. Additive manufacturing for prostheses development: state of the art10.1108/RPJ-01-2022-0029 ↗
33. 3D printing as a promising tool in personalized medicine10.1208/s12249-020-01905-8 ↗
34. Warpage control in thermoplastic ABS parts produced through material extrusion (MEX)-based fused deposition modeling (FDM)10.1108/RPJ-01-2024-0023 ↗
35. Investigation of the performance of the structure and energy absorption in sandwich panels of PLA/TPU manufactured by the FFF technique
36. A systematic review on the technical performance and sustainability of 3D printing filaments using recycled plastic
37. 3D printing of semicrystalline polypropylene: towards eliminating warpage of printed objects10.1007/s12034-020-02097-4 ↗
38. Material extrusion-based additive manufacturing of polypropylene: a review on how to improve dimensional inaccuracy and warpage10.1002/app.48545 ↗
39. Fused deposition modeling of thermoplastic elastomeric materials: challenges and opportunities
40. Dynamic chemical cross-linking and mechanical training of bio-based polyamides fabricate strong and recyclable elastomers10.1021/acssuschemeng.2c01145 ↗
41. Fracture, fatigue, and friction of polymers in which entanglements greatly outnumber cross-links10.1126/science.abg6320 ↗
42. Hybrid cross-linking to construct functional elastomers10.1021/acs.accounts.3c00391 ↗
43. Elastomeric biomaterials for tissue engineering10.1016/j.progpolymsci.2012.05.003 ↗
44. Brydson · 1995 · vol. 81
45. Thermoplastic elastomers (TPEs) from rubber-plastic blends10.1016/B978-0-323-91758-2.00008-8 ↗
46. Development, characterization and applications of a unique self-healable elastomer: exploring a facile metal-ligand interaction10.1016/j.polymer.2021.124373 ↗
47. Recent advances in thermoplastic elastomers from living polymerizations: macromolecular architectures and supramolecular chemistry10.1016/j.progpolymsci.2019.04.002 ↗
48. Thermoplastic elastomers based on PP/EPDM blends by dynamic vulcanization10.5254/1.3548176 ↗
49. Babu · 2010 · 219
50. Influence of type of vulcanization on rheological and thermal properties of PP/NR blends10.1007/s00289-005-0481-3 ↗
51. Systematic investigation on the effect of crosslinking agent type and dosage on the performance of TPU/MVQ based thermoplastic vulcanizates10.1002/app.50630 ↗
52. Preparation, microstructure, and microstructure-properties relationship of thermoplastic vulcanizates (TPVs): a review10.1016/j.progpolymsci.2017.11.003 ↗
53. TPV: a new insight on the rubber morphology and Mechanic/Elastic properties10.3390/polym12102315 ↗
54. New understanding of morphology evolution of thermoplastic vulcanizate (TPV) during dynamic vulcanization10.1021/sc500391g ↗
55. Morphology development of EPDM/PP uncross-linked/dynamically cross-linked blends10.1002/pen.22084 ↗
56. Morphology development in thermoplastic vulcanizates (TPV): dispersion mechanisms of a pre-crosslinked EPDM phase10.1016/j.eurpolymj.2009.07.012 ↗
57. Dynamically vulcanized nitrile rubber/polyoxymethylene thermoplastic elastomers10.1002/1097-4628(20000919)77:12<2641::AID-APP110>3.0.CO;2-0 ↗
58. Development of novel polar thermoplastic vulcanizates based on ethylene acrylic elastomer and polyamide 12 with special reference to heat and oil aging10.1002/app.42655 ↗
59. Recent developments for EPDM-Based thermoplastic vulcanisates10.1002/masy.200690006 ↗
60. Novel heat and oil-resistant thermoplastic vulcanizates based on ethylene-vinyl acetate rubber/poly(vinylidene fluoride)10.1039/C6RA19335H ↗
61. Morphology and mechanical properties of impact modified polypropylene blends10.1002/pen.21089 ↗
62. Metallocene catalyzed Ethylene/Alpha olefin copolymers used in thermoplastic elastomers10.5254/1.3547836 ↗
63. Nonisothermal thermophysical evaluation of polypropylene/natural rubber based TPEs: effect of blend ratio and dynamic vulcanization10.1002/pen.21219 ↗
64. Natural rubber–isotactic polypropylene thermoplastic blends10.1002/app.20077 ↗
65. Effect of vulcanization system on properties of thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends10.1016/j.polymertesting.2005.09.007 ↗
66. Influence of curing agent and compatibilizer on the physicomechanical properties of polypropylene/nitrile butadiene rubber blends investigated by positron annihilation lifetime technique10.1002/app.24497 ↗
67. Failure properties of thermoplastic elastomers from polyethylene/nitrile rubber blends: effect of blend ratio, dynamic vulcanization, and filler incorporation10.1002/app.21381 ↗
68. Properties and unique morphological evolution of dynamically vulcanized bromo-isobutylene-isoprene rubber/polypropylene thermoplastic elastomer10.1039/C5RA26171F ↗
69. Effect of extender oils on the stress relaxation behavior of thermoplastic vulcanizates10.3144/expresspolymlett.2008.92 ↗
70. Effect of curing system on morphological, rheological, thermal and mechanical properties of thermoplastic vulcanizates based on epoxidized natural rubber and polypropylene
71. Effect of the compatibility on the morphology and properties of acrylonitrile–butadiene rubber/polypropylene thermoplastic vulcanizates10.1002/app.35222 ↗
72. Study on the microstructure and properties of bromobutyl rubber (BIIR)/polyamide-12 (PA12) thermoplastic vulcanizates (TPVs)10.1002/app.43043 ↗
73. Effects of partial replacement of silicone rubber with flurorubber on properties of dynamically cured poly(vinylidene fluoride)/silicone rubber/flurorubber ternary blends10.1016/j.polymertesting.2013.09.004 ↗
74. Fancy · 2013 · 137
75. Continuous mixing and compounding of Polymer/Filler and Polymer/Polymer mixtures with the aid of ultrasound10.5254/1.3547782 ↗
76. Dynamic vulcanization of novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends with special reference to morphology, physical properties and degree of vulcanization10.1016/j.polymer.2014.12.016 ↗
77. Preparation and properties of dynamically cured poly(vinylidene fluoride)/silicone rubber blends10.1016/j.polymertesting.2013.06.007 ↗
78. Melt viscoelastic properties of peroxide cured polypropylene-ethylene octene copolymer thermoplastic vulcanizates10.1002/pen.21553 ↗
79. New approach to fabricate novel fluorosilicone thermoplastic vulcanizate with bicrosslinked silicone rubber-Core/Fluororubber-Shell particles dispersed in Poly(vinylidene fluoride): structure and property10.1021/acs.iecr.5b04676 ↗
80. Effect of crosslinking on morphology and phase inversion of EPDM/PP blends10.1016/j.matchemphys.2012.01.053 ↗
81. Morphology development and phase inversion during dynamic vulcanisation of EPDM/PP blends10.1016/j.eurpolymj.2011.04.005 ↗
82. Rubber extrusion principles10.1201/9780138758851-22 ↗
83. Compression molding
84. Real time uncertainty estimation in filling stage of resin transfer molding process10.1002/pc.25803 ↗
85. Influence of the magnetic field during injection molding on the mechanical behavior of thermoplastic copolyester elastomers filled with strontium ferrite10.1016/j.sna.2023.114177 ↗
86. A comparison of traditional manufacturing vs additive manufacturing, the best method for the job10.1016/j.promfg.2019.02.003 ↗
87. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing10.1016/j.bushor.2017.05.011 ↗
88. Making sense of 3-D printing: creating a map of additive manufacturing products and services
89. Additive manufacturing of biomaterials − the evolution of rapid prototyping10.1002/adem.201800511 ↗
90. Three-dimensional printing of plastics
91. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
92. Printing dense and low-resistance copper microstructures via highly directional laser-induced forward transfer
93. Additive manufacturing of sustainable biomaterials for biomedical applications
94. Wire-based friction stir additive manufacturing of TiC reinforced al-cu-mg composite: particle refinement and dispersion10.1016/j.compositesa.2025.109009 ↗
95. Laser powder bed fusion of Alumina/Fe–Ni ceramic matrix particulate composites impregnated with a polymeric resin10.1016/j.jmrt.2023.03.181 ↗
96. Extrusion-based 3D printing of food biopolymers: a highlight on the important rheological parameters to reach printability10.1016/j.jfoodeng.2022.111371 ↗
97. A diffusion-controlled kinetic model for binder burnout in a green part fabricated by binder jetting based on the thermal decomposition kinetics of TEG-DMA
98. A novel practical method for the production of functionally Graded materials by varying exposure time via photo-curing 3D printing10.1016/j.jmapro.2023.08.018 ↗
99. Printing of composite thermoplastic elastomers for super-stretchable soft artificial muscles10.1002/app.57177 ↗
100. Additive manufacturing in the aerospace and automotive industries: recent trends and role in achieving sustainable development goals10.1016/j.asej.2023.102516 ↗