Fabrication and topochemically controlled diacetylene-based polymer and its colorimetric application toward HCl detection
Source abstract
Abstract
Abstract The detection of highly toxic HCl fumes in a convenient, fast and reliable manner is essential due to its potential human health hazards. For this purpose, we have used polydiacetylenes (PDAs) due to their unique colorimetric transition of blue-to-red in response to various stimuli. In the present work, we prepared diynediamides (DAs) functionalized with tertiary amines bearing alkylene chains of different lengths. The colorimetric responses of various DAs in the PVC polymer matrix upon exposure to UV light and HCl gas were investigated using UV–vis absorption and Raman spectroscopy. The topochemical polymerization of DA monomers was also explored using DFT calculations, and the findings fail to support the odd-even rule. Furthermore, spin coating was used because it allows the rapid and facile preparation of homogeneous thin films, and the time-dependent color transitions in the presence of HCl gas were recorded. Moreover, using an inkjet printer, a single-component ink solution containing DCDA-DMPDA was used to prepare lightweight, inexpensive and flexible sensing systems with tailored patterns. Paper based test strips embedded with poly(DCDA-DMPDA) can be used to detect HCl with lower concentrations up to 0.1 mM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polydiacetylene-based materials and applications · Luminescence and Fluorescent Materials · Ocular Surface and Contact Lens
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Respiratory tract lesions induced by sensory irritants at the RD50 concentration10.1016/0041-008X(84)90295-3 ↗
2. Hydrochloric acid inhalation: who needs admission?10.1136/emj.13.6.422 ↗
3. Increases in airway responsiveness following acute exposure to respiratory irritants10.1378/chest.94.3.476 ↗
4. Evaluation of the pulmonary effects of HCl using CO2 challenges in Guinea pigs10.1016/0272-0590(85)90179-4 ↗
5. HCl gas sensing properties of TPPH2 dispersed in various copolymers10.1016/S0925-4005(99)00469-4 ↗
6. Photochromic spiropyran-embedded PDMS for highly sensitive and tunable optochemical gas sensing10.1039/C4CC00567H ↗
7. Enhanced sensitivity of color/emission switching of fluorescein film by incorporation of polyoxometalate using HCl and NH3 gases as in situ stimuli10.1039/C5RA05097A ↗
8. Nanofiber-net-binary structured membranes for highly sensitive detection of trace HCl gas10.1039/c2nr32730a ↗
9. DNA polyfluorophores as highly diverse chemosensors of toxic gases10.1039/c1sc00301a ↗
10. CsPbBr3 perovskite nanocrystals as highly selective and sensitive spectrochemical probes for gaseous HCl detection10.1039/C6TC04136A ↗
11. Stretchable nanofibrous membranes for colorimetric/fluorometric HCl sensing: highly sensitive charge-transfer excited state10.1016/j.snb.2017.07.040 ↗
12. Fabrication of poly(n-isopropylacrylamide) nanoparticles using a simple spray-coating method and applications for a QCM-based HCl gas sensor coating10.1016/j.snb.2017.05.130 ↗
13. Water-soluble luminescent hybrid amino clay grafted with lanthanide complexes synthesized by a michael-like addition reaction and its gas sensing application in PVP nanofiber10.1039/C7TC00640C ↗
14. Continuous detection of HCl and NH3 gases with a high-performance fluorescent polymer sensor10.1039/C8NJ02344A ↗
15. A fluorescent and colorimetric sensor based on a porphyrin doped polystyrene nanoporous fiber membrane for HCl gas detection10.1039/C7RA02040F ↗
16. Construction and molecular understanding of an unprecedented, reversibly thermochromic bis-polydiacetylene10.1002/adfm.201304147 ↗
17. Inkjet-compatible single-component polydiacetylene precursors for thermochromic paper sensors10.1021/am303300g ↗
18. Development of naphthalimide-functionalized thermochromic conjugated polydiacetylenes and their reversible green-to-red chromatic transition in the solid state10.1016/j.dyepig.2019.01.058 ↗
19. Low temperature thermochromic polydiacetylenes: design, colorimetric properties, and nanofiber formation10.1021/acs.macromol.5b02683 ↗
20. Mechanically drawable thermochromic and mechanothermochromic polydiacetylene sensors10.1002/adfm.201504845 ↗
21. Thermochromic reversibility of conjugated polymers derived from a diacetylenic lipid containing lithium salt10.1039/b923323g ↗
22. High temperature thermochromic polydiacetylenes: design and colorimetric properties10.1016/j.apsusc.2017.06.198 ↗
23. Polydiacetylene-coated polyvinylidene fluoride strip aptasensor for colorimetric detection of zinc(II)10.1016/j.snb.2016.03.118 ↗
24. Benzo-15-crown-5 functionalized polydiacetylene-based colorimetric self-assembled vesicular receptors for lead ion recognition10.1039/c0jm03062g ↗
25. Polydiacetylene-based sensor for highly sensitive and selective Pb2+ detection10.1016/j.dyepig.2015.04.035 ↗
26. Charge-induced chromatic transition of amino acid-derivatized polydiacetylene liposomes10.1021/la980185b ↗
27. Polydiacetylene nanofiber composites as a colorimetric sensor responding to Escherichia coli and pH10.1021/acsomega.7b01136 ↗
28. Smartphone-based VOC sensor using colorimetric polydiacetylenes10.1021/acsami.7b18121 ↗
29. Colorimetric sensors for volatile organic compounds (VOCs) based on conjugated polymer-embedded electrospun fibers10.1021/ja067856+ ↗
30. Polydiacetylene paper-based colorimetric sensor array for vapor phase detection and identification of volatile organic compounds10.1039/c2jm16273c ↗
31. A protective layer approach to solvatochromic sensors10.1038/ncomms3461 ↗
32. Electrochromatic carbon nanotube/polydiacetylene nanocomposite fibres10.1038/nnano.2009.264 ↗
33. Polydiacetylene-polymethylmethacrylate/graphene composites as one-shot, visually observable, and semiquantative electrical current sensing materials10.1021/am401099s ↗
34. Investigations of the mechanochromic behavior of poly(urethane-diacetylene) segmented copolymers10.1021/ma00002a027 ↗
35. Polymerizable biomimetic vesicles with controlled local presentation of adhesive functional DOPA groups10.1021/la904629a ↗
36. Magnetochromatic polydiacetylene by incorporation of Fe3O4 nanoparticles10.1002/anie.201100064 ↗
37. Recent progress on polymer-based fluorescent and colorimetric chemosensors10.1039/C0CS00058B ↗
38. Biosensors and chemosensors based on the optical responses of polydiacetylenes10.1039/c2cs35055f ↗
39. An indirect approach for anion detection: the displacement strategy and its application10.1039/c2cc33158f ↗
40. Solid-state polymerization of linear and cyclic acetylenes10.1002/pol.1978.230130104 ↗
41. Novel polydiacetylenes for optical materials: beyond the conventional polydiacetylenes10.1039/a907438d ↗
42. Crystal structures, polymerization, and thermochromic phase changes in urethane-substituted diacetylenes crystals with varying alkyl chain lengths10.1021/cm000581r ↗
43. Network polydiacetylene films: preparation, patterning, and sensor applications10.1002/adfm.201002042 ↗
44. A chemical sensor for trace V(V) ion determination based on fatty hydroxamic acid immobilized in polymethylmethacrylate10.1016/j.snb.2005.06.007 ↗
45. Photochromic spiropyran-embedded pdms for highly sensitive and tunable optochemical gas sensing10.1039/C4CC00567H ↗
46. Plasticized poly(vinyl chloride)-based photonic crystal for ion sensing10.1021/ac503447m ↗
47. A new beryllium ion-selective membrane electrode based on dibenzo(perhydrotriazino)aza-14-crown-4 ether10.1016/j.aca.2012.08.050 ↗
48. Preparation of thin poly(vinyl chloride) films with size-controlled nanopores10.1246/cl.130371 ↗
49. Detection of adulterated gasoline using colorimetric organic microfibers10.1039/c0jm02287j ↗
50. Dual-mode optical sensing of organic vapors and proteins with polydiacetylene (PDA)-embedded electrospun nanofibers10.1021/la5017388 ↗
51. A fluorescent and colorimetric sensor based on a porphyrin doped polystyrene nanoporous fiber membrane for HCl gas detection10.1039/C7RA02040F ↗
52. Cross-polymerization of hard blocks in segmented copoly(ether urea)s10.1021/ma801220q ↗
53. Photopatterned polydiacetylene images using a DNA bio-photomask10.1021/acsami.6b01830 ↗
54. Inkjet-printable amphiphilic polydiacetylene precursor for hydrochromic imaging on paper10.1002/adfm.201504088 ↗
55. Analysis of adipate ester contents in poly(vinyl chloride) plastics by means of FT-Raman spectroscopy10.1016/j.vibspec.2006.05.031 ↗
56. Frisch · 2013
57. Novel polydiacetylenes for optical materials: beyond the conventional polydiacetylenes10.1039/a907438d ↗
58. Novel odd/even effect of alkylene chain length on the photopolymerizability of organogelators10.1021/ol048364+ ↗
59. Polydiacetylene nanofibers created in low-molecular-weight gels by post modification: control of blue and red phases by the odd-even effect in alkyl chains10.1021/ja069307+ ↗
60. Thermochromatism and structural evolution of metastable polydiacetylenic crystals10.1021/jp060309q ↗
61. Polydiacetylene-based electrospun fibers for detection of HCl gas10.1002/marc.201100882 ↗
62. Effect of the molecular size of analytes on polydiacetylene chromism10.1002/adfm.201000262 ↗
63. Investigation of the topochemical solid‐state polymerization of a diacetylene by X-ray methods and brillouin‐spectroscopy10.1002/macp.1979.021800716 ↗