journal article·2025-12Open access

Evolution of hierarchical microstructures in Cu–Fe immiscible alloy driven by liquid-state mixing

S. Sarmast-Ghahfarokhi, J.G. Lopes, S.S. Dash, J.P. Oliveira, Y. Zou, M.J. Benoit, Y.N. Zhou

Abstract

Copper–iron (Cu–Fe) immiscible alloys are known for their potential to form hierarchical microstructures with superior mechanical properties under rapid solidification conditions. However, the formation of these microstructures during Cu/Fe melting and mixing—typically occurring in processes such as arc- and laser-induced melting‒remains poorly understood, despite its relevance to the integration of structural materials across various industries. This study showed that hierarchical and homogeneous microstructures in Cu–Fe alloys can be tailored in situ with two distinct regimes governed by the degree of Fe dilution through non-equilibrium solidification. In the high-Fe content sample, phase separation during the liquid state, followed by Marangoni-driven motion, led to the formation of a hierarchical structure comprising DO 3 -ordered Fe-rich particles with embedded Cu-rich grains, along with uniformly distributed L1 2 nanoparticles. In contrast, the low-Fe sample exhibited more uniformly dispersed, smaller DO 3 -ordered Fe-rich particles with a lower number density, along with dispersed L1 2 nanoprecipitates. The formation of such microstructures, including Cu/DO 3 Fe-rich particles and L1 2 nanoprecipitates, was primarily governed by surface energy–driven mechanisms and solute trapping under rapid cooling. These microstructures enhanced the local hardness and elastic modulus, primarily due to the increased number density of Fe-rich particles, highlighting their dominant role over size or morphology in strengthening Cu–Fe alloys. This study provides new insights into the microstructural evolution of immiscible alloy systems. The findings offer a foundation for microstructural tailoring to enhance mechanical performance and expand the potential applications of Cu–Fe alloy systems in advanced engineering technologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Laser powder bed fusion of immiscible steel and bronze: a compositional gradient approach for optimum constituent combination10.1016/j.actamat.2023.119572 ↗
2. Designing scheme of compositionally tuned high-strength and high-conductive copper alloy: a systematic phase transformation study
3. Development of a new class of high strength copper alloy using immiscibility route in cu-fe-si system: evolution of hierarchical multi-scale microstructure10.1016/j.msea.2018.03.026 ↗
4. Evolution of L12 ordered precipitates in cu–fe–si alloy system and its influence on potential strength–conductivity properties10.1007/s13632-023-00938-2 ↗
5. Laser powder bed fusion of ultrahigh strength Fe-Cu alloys using elemental powders
6. Effect of W content on the microstructure and properties of Cu-Fe alloy10.1016/j.jmrt.2020.04.031 ↗
7. A surface energy driven dissolution model for immiscible Cu-Fe alloy10.1016/j.molliq.2018.04.020 ↗
8. Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu-Fe alloys10.1016/j.actamat.2005.12.023 ↗
9. Behavior of Fe-rich phase during rapid solidification of Cu-Fe hypoperitectic alloy10.1016/j.msea.2005.05.045 ↗
10. Formation of immiscible alloy powders with egg-type microstructure10.1126/science.1073050 ↗
11. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys10.1016/j.actamat.2012.10.033 ↗
12. Cu-based metastable microstructural template and its role in the heat flux application10.1177/02670836231219869 ↗
13. Solidification of immiscible alloys: a review10.1007/s40195-016-0523-x ↗
14. Investigation of the critical factors influencing mechanical properties and failure behavior in weld-brazed ZnAlMg coated steel10.1007/s11661-024-07671-7 ↗
15. Investigating the microstructural evolution and interfacial morphology of laser- and arc-brazed ZnAlMg coated steel10.1016/j.jmatprotec.2023.117943 ↗
16. Improvement of the mechanical performance of ZnAlMg coated steel brazed joints through precipitation-based strengthening10.1016/j.msea.2023.145657 ↗
17. High-deposition laser brazing with enhanced surface quality, bridge performance and mechanical properties10.1016/j.jmapro.2024.05.078 ↗
18. Joint interface characteristics and phase transformations in laser brazed steel
19. The effect of zinc coating type on the morphology, joint geometry, and mechanical properties of weld-brazed thin-gauge automotive steel
20. Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin-gauge dual-phase steel10.1007/s00170-022-09309-7 ↗
21. Tailoring intermetallic compound formation within laser weld brazed joints using a novel heat input approach10.1016/j.jmatprotec.2024.118622 ↗
22. Role of bead shape and dispersed intermetallic phases in determining the strength of CMT brazed DP780 lap joints10.1016/j.jmapro.2019.06.007 ↗
23. Influence of arc brazing parameters on microstructure and joint properties of electro-galvanized steel10.3390/met9091006 ↗
24. Influence of wire feeding speed on laser brazing zinc-coated steel with Cu-based filler metal10.1007/s00170-014-6347-9 ↗
25. Gas metal arc welding product and procedure selection
26. DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration10.1080/08957959.2015.1059835 ↗
27. Microstructure evolution in laser alloyed layer of cu-fe-al-si on Cu substrate10.1016/j.msea.2003.10.263 ↗
28. Formation of core-type macroscopic morphologies in Cu-Fe base alloys with liquid miscibility gap10.1007/s11661-004-0298-y ↗
29. On the nature of nano twin-induced shear band formation in a dispersion strengthened copper alloy under micro-mechanical loading10.1038/s41598-024-74019-x ↗
30. Hierarchical microstructures and deformation behavior of laser direct-metal-deposited Cu–Fe alloys10.1016/j.msea.2020.140659 ↗
31. Achieving novel copper–steel joints with a combination of high strength and ductility reinforced by in-situ Fe-rich particles10.1016/j.jmst.2023.09.036 ↗
32. Atom-probe analysis of γ-iron precipitates in Cu-1.2 at% Fe alloys10.1016/S0036-9748(88)80068-1 ↗
33. Thermodynamic analysis of the iron-copper system I: the stable and metastable phase equilibria10.1007/BF02664905 ↗
34. Thermodynamics of alloys and phase equilibria in the copper-iron system10.1361/105497103770330280 ↗
35. Densities of liquid Fe-Ni and Fe-Cr alloys10.1007/BF02662777 ↗
36. Iida · 2015
37. Microstructure evolution of undercooled iron–copper hypoperitectic alloy10.1016/S0921-5093(01)00928-5 ↗
38. Estimation of the viscosities of binary metallic melts using gibbs energies of mixing10.1007/BF02650079 ↗
39. Kou · 2003