Additive manufacturing of biomimetic lightweight silicon oxycarbide ceramics with high mechanical strength and low thermal conductivity
Source abstract
Abstract
Thermal insulation is crucially important to the safety and reusability of aerospace vehicles. Fabrication of thermal insulation materials with light weight, high mechanical strength and low thermal conductivity remains challenging. In this study, porous polymer derived silicon oxycarbide (SiOC) ceramics with hierarchical structures mimicking cuttlebones were prepared through stereolithography additive manufacturing followed by pyrolysis. The compressive strength of SiOC ceramics with ridges (“R” structures) alongside the sinusoidal walls (“S” structures) (RS-SiOC, 13.37 ± 0.86 MPa for 7-RS-SiOC) mimicking those of cuttlebone was much higher than that of SiOC ceramics with just sinusoidal walls (S–SiOC, 8.43 ± 0.81 MPa), while the density of RS-SiOC with 7 ridges (7-RS-SiOC) and S–SiOC were 0.40 g/cm3 and 0.39 g/cm3, respectively. Our results revealed that the tailored “S” and “R” structures of biomimetic 7-RS-SiOC ceramics, together with the amorphous network of SiOC assembled in the layer-by-layer manner, rendered the high mechanical strength. In addition, the 7-RS-SiOC sample exhibited a low thermal conductivity of 0.12 W/(m·K) at room temperature. The back temperature of the 7-RS-SiOC sample was 179.5 °C when exposed to 800 °C for 1200 s, showing excellent thermal insulation capability. The state-of-the-art biomimetic design of lightweight SiOC ceramics likely offers a solution to high-performance thermal insulation for aerospace vehicles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Hypocrystalline ceramic aerogels for thermal insulation at extreme conditions10.1038/s41586-022-04784-0 ↗
2. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
3. Calcium-doped boron nitride aerogel enables infrared stealth at high temperature up to 1300°C10.1007/s40820-021-00754-9 ↗
4. A highly flexible form-stable silicone-octadecane PCM composite for heat harvesting
5. Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material10.1126/science.abg9556 ↗
6. Bioinspired structural materials10.1038/nmat4089 ↗
7. Biological materials: structure and mechanical properties10.1016/j.pmatsci.2007.05.002 ↗
8. Toughening mechanisms of the elytra of the diabolical ironclad beetle10.1038/s41586-020-2813-8 ↗
9. Mechanically efficient cellular materials inspired by cuttlebone10.1002/adma.202007348 ↗
10. Infra-red and vibration tests of hybrid ablative/ceramic matrix technological breadboards for earth re-entry thermal protection systems10.1016/j.actaastro.2017.01.045 ↗
11. Eckel · Additive manufacturing of polymer-derived ceramics · 2016 · 351 · 58
12. Biomimetic porous silicon oxycarbide ceramics with improved specific strength and efficient thermal insulation10.1016/j.jmst.2023.06.006 ↗
13. Design paradigm for strong-lightweight perfect microwave absorbers: the case of 3D printed gyroid shellular SiOC-based metamaterials10.1016/j.carbon.2022.06.004 ↗
14. Tailoring thermal insulation architectures from additive manufacturing10.1038/s41467-022-32027-3 ↗
15. SiOC glass-diamond composites10.1111/j.1551-2916.2011.04921.x ↗
16. Mechanical design of the highly porous cuttlebone: a bioceramic hard buoyancy tank for cuttlefish10.1073/pnas.2009531117 ↗
17. Stereolithography printing of bone scaffolds using biofunctional calcium phosphate nanoparticles10.1016/j.jmst.2021.01.062 ↗
18. Photocurable elastomers with tunable mechanical properties for 3D digital light processing printing10.1007/s10965-020-02289-w ↗
19. Hybrid RSiO1.5/B2O3 gels from modified silicon alkoxides and boric acid10.1023/A:1008733511697 ↗
20. Highly porous SiOC bulk ceramics with water vapor assisted pyrolysis10.1111/jace.13634 ↗
21. Role of carbon on the thermal and electrical properties of graphene-enriched silicon oxycarbides10.1016/j.ceramint.2020.07.314 ↗
22. Structural evolution of silicon carbide phase from the polycarbosilane cured with iodine: NMR study10.1007/s10904-018-0878-8 ↗
23. Efficient organic-to-inorganic conversion of polysiloxane by novel platinum-thiol catalytic system
24. Crystallization behavior of polymer-derived Si-O-C for ceramic matrix composite processing10.1016/j.actamat.2018.01.052 ↗
25. Continuous sol-gel derived SiOC/HfO2 fibers with high strength10.1039/C4RA14540B ↗
26. A nanostructured Si/SiOC composite anode with volume-change-buffering microstructure for lithium-ion batteries10.1002/chem.201805255 ↗
27. Extremely low thermal conductivity and high electrical conductivity of sustainable carbonceramic electrospun nonwoven materials10.1126/sciadv.ade6066 ↗
28. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
29. The near-tip fields of fast cracks10.1126/science.1180476 ↗
30. Layer interface effects on dielectric breakdown strength of 3D printed rubber insulator using stereolithography
31. Cracks, porosity and microstructure of Ti modified polymer-derived SiOC revealed by absorption-, XRD- and XRF-contrast 2D and 3D imaging10.1016/j.actamat.2020.07.067 ↗
32. Quantitative in situ studies of dynamic fracture in brittle solids using dynamic X-ray phase contrast imaging
33. Fracture mechanisms in bulk metallic glassy materials10.1103/PhysRevLett.91.045505 ↗
34. Thermal and thermomechanical performance of actively cooled pyramidal sandwich panels10.1016/j.ijthermalsci.2019.02.002 ↗
35. Ultralight and fire-resistant ceramic nanofibrous aerogels with temperature-invariant superelasticity
36. Thermal conductivity of amorphous materials
37. Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion10.1016/j.ijsolstr.2012.03.029 ↗
38. Fabrication and properties of silica/mullite porous ceramic by foam-gel casting process using silicon kerf waste as raw material
39. Porous anorthite ceramics with ultra-low thermal conductivity10.1016/j.jeurceramsoc.2013.04.006 ↗
40. Fabrication and properties of porous anorthite ceramics with modelling pore structure10.1016/j.matlet.2016.12.131 ↗
41. Mechanical properties and thermal conductivity of lightweight and high-strength carbon-graphite thermal insulation materials10.1007/s10853-021-06862-6 ↗
42. Characteristics of fluorinated CNTs added carbon foams10.1016/j.apsusc.2015.11.111 ↗
43. Fabrication of low density carbon foams by gel-casting method from sucrose/microcapsules10.15251/DJNB.2021.163.969 ↗
44. Effects of sintering temperature on properties of porous mullite/corundum ceramics10.1016/j.matlet.2011.12.087 ↗
45. Multifunctional C/SiO2/SiC-based aerogels and composites for thermal insulators and electromagnetic interference shielding10.1007/s10971-019-04916-5 ↗
46. Synthesis of monolithic SiC aerogels with high mechanical strength and low thermal conductivity10.1016/j.ceramint.2019.02.216 ↗
47. Thermo-mechanical response of superalloy honeycomb sandwich panels subjected to non-steady thermal loading10.1016/j.matdes.2015.09.016 ↗
48. Thermal insulation performance evaluation of autoclaved aerated concrete panels and sandwich panels based on temperature fields: experiments and simulations10.1016/j.conbuildmat.2021.124560 ↗
49. Cementitious insulated drywall panels reinforced with kraft-paper honeycomb structures10.3390/buildings12081261 ↗