The influence of particle size distribution on the surface appearance of glazed tiles
Source abstract
Abstract
Abstract Matte glaze was milled in for different times (15–50 min) and the glazes obtained were applied over ceramic bodies which were then fired using an industrial cycle and the final surfaces were analyzed using a glossmeter. The same glazes were also uniaxially pressed, forming cylindrical samples; the specimens were placed on engobe surfaces and fired at 1100 °C in a laboratory oven. The contact angles between the melted specimens and the ceramic surfaces were measured to determine their wettability. The results showed a correlation between the glaze particle size distribution and the surface aspect of the final product.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pigment Synthesis and Properties · Cultural Heritage Materials Analysis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Vogel · 1994
2. Doremus · 1994
3. Mysen · 2005
4. Gutzow · 1995
5. Creep viscosity of vitreous china10.1111/j.1551-2916.2004.00923.x ↗
6. The relation of viscosity, nuclei formation, and crystal growth in titania-opacified enamel10.1111/j.1151-2916.1956.tb15642.x ↗
7. Wettability studies of cubic boron nitride by silver-titanium10.1016/0272-8842(95)96201-Y ↗
8. Relationship between wettability and interfacial reaction for Sn10Ag4Ti on Al2O3 and SiC substrates10.1016/S0272-8842(97)00009-6 ↗
9. Wettability of non-reactive Cu/Si–Al–O–N systems I: experimental results10.1016/S0955-2219(00)00203-X ↗
10. Progress in modelling of chemical-reaction limited wetting10.1016/S0955-2219(03)00291-7 ↗
11. Wetting behaviour of Y2O3/AlN additive on SiC ceramics10.1016/j.jeurceramsoc.2005.12.022 ↗
12. The wettability of SiC ceramics by molten E2O3(ss)/AlN (E2O3(ss)=solid solution of rare earth oxides)10.1016/j.ceramint.2005.10.026 ↗
13. Use of glass waste as a raw material in porcelain stoneware tile mixtures10.1016/j.ceramint.2006.01.001 ↗
14. Glaze characterization using the hot stage microscope: a practical approach?
15. The crawling of glazes
16. The effect of different bodies on some wetting and flow characteristics of glazes10.1111/j.1151-2916.1938.tb15773.x ↗
17. Zircon glazes: surface tension and wetting action
18. Scholze · 1991
19. Measuring surface tension of glass
20. Influence of firing parameters on phase composition of raw glazes10.1016/j.jeurceramsoc.2006.05.012 ↗
21. Non-destructive determination of the structure and composition of glazes by Raman spectroscopy10.1111/j.1551-2916.2005.00096.x ↗
22. Interface reactions between glazes and the crystal phases in a high-talc tile body10.1111/j.1151-2916.1954.tb14000.x ↗
23. Microchemistry and microstructure of some opaque glaze/tile interfaces in relation to their physical properties10.1016/0272-8842(95)95874-H ↗
24. The use of pumice (pumicite) in transparent roof tile glaze composition10.1016/j.jeurceramsoc.2005.06.032 ↗
25. Variables that determine the matt appearance of some ceramic floor and wall tile glazes