On the orientation and temperature dependence of the superelasticity and elastocaloric effect of Cu-Al-Mn-(Ni, Mo, Cr) shape memory alloys
Source abstract
Abstract
This study systematically reveals the influence of the crystal orientation and operating temperature on the superelasticity and elastocaloric effect of single-crystal Cu-Al-Mn-(Ni, Mo, Cr) shape memory alloys. These single crystals were prepared using the abnormal grain growth method to produce samples having orientations classified as approximately [0 0 1] β , [1 0 1] β , and [1 1 1] β . The experimental results indicated that significant differences in energy dissipation and elastocaloric cooling capacity among the three types of orientations, which were attributed to the different numbers of induced martensitic variants and the magnitude of transformation fraction. Compared with the approximately [0 0 1] β and [1 1 1] β orientations, the approximately [1 0 1] β orientation was considered the preferred choice for a solid-state refrigerant due to its smaller energy dissipation and the pronounced coefficient of performance of the material. On the other hand, the superelastic and elastocaloric properties of the three types of orientations changed as the testing temperature increased, which was attributed to atomic ordering (from 80 °C to 140 °C) and the formation of bainitic α (above 140 °C). This study identified the preferred orientation for solid-state refrigerant applications and comprehensively analyzed the influence of the operating environment on Cu-Al-Mn-(Ni, Mo, Cr) shape memory alloys for solid-state refrigeration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Otsuka · 1999
2. Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processes10.1016/j.ijrefrig.2015.03.001 ↗
3. A review of elastocaloric cooling: materials, cycles and system integrations10.1016/j.ijrefrig.2015.12.001 ↗
4. Design of a hydraulically driven compressive elastocaloric cooling system10.1080/23744731.2016.1171630 ↗
5. Kirsch · 2017
6. Novel mechanocaloric materials for solid-state cooling applications10.1063/1.5113620 ↗
7. A high-performance solid-state electrocaloric cooling system10.1126/science.aba2648 ↗
8. Goetzler · 2017
9. Caloric effects in ferroic materials: new concepts for cooling10.1002/adem.201100178 ↗
10. Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing10.1126/science.aax7616 ↗
11. Colossal elastocaloric effect in ferroelastic Ni-Mn-Ti alloys10.1103/PhysRevLett.122.255703 ↗
12. Enhanced cyclability of elastocaloric effect in a directionally solidified Ni55Mn18Ga26Ti1 alloy with low hysteresis10.1016/j.scriptamat.2020.08.010 ↗
13. Enhanced cyclic stability of elastocaloric effect in oligocrystalline Cu-Al-Mn microwires via cold-drawing10.1016/j.ijrefrig.2020.02.020 ↗
14. Thin-walled Ni-Ti tubes under compression: ideal candidates for efficient and fatigue-resistant elastocaloric cooling
15. Improved elastocaloric cooling performance in gradient-structured NiTi alloy processed by localized laser surface annealing10.1016/j.actamat.2021.116741 ↗
16. Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl10.1016/j.actamat.2015.06.011 ↗
17. Anisotropy of martensitic transformations in modeling of shape memory alloy polycrystals10.1016/S0749-6419(00)00009-7 ↗
18. Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi10.1016/j.actamat.2021.116731 ↗
19. Ultra-large single crystals by abnormal grain growth10.1038/s41467-017-00383-0 ↗
20. Abnormal grain growth induced by cyclic heat treatment10.1126/science.1238017 ↗
21. The effect of dynamic aging on the cyclic stability of Cu73Al16Mn11 shape memory alloy10.1016/j.msea.2017.06.104 ↗
22. Enhancement of superelasticity in Cu-Al-Mn-Ni shape-memory alloys by texture control10.1007/s11661-002-0267-2 ↗
23. Effect of alloying elements on the shape memory properties of ductile Cu–Al–Mn alloys10.1016/S0921-5093(99)00301-9 ↗
24. Damping properties of ductile Cu-Al-Mn-based shape memory alloys10.2320/matertrans.46.118 ↗
25. Martensitic transformations and shape-memory materials10.1016/S1359-6454(99)00295-5 ↗
26. Orientation dependence in superelastic Cu-Al-Mn-Ni micropillars10.1016/j.jallcom.2016.10.090 ↗
27. Compressive stress-induced martensitic transformation and elastocaloric effect in Cu-Al-Mn single-crystal alloy10.1016/j.msea.2022.142945 ↗
28. Elastocaloric cooling on the miniature scale: a review on materials and device engineering10.1002/ente.201800137 ↗
29. Ultrahigh cyclability of a large elastocaloric effect in multiferroic phase-transforming materials10.1080/21663831.2019.1566182 ↗
30. Giant elastocaloric effect covering wide temperature range in columnar-grained Cu71. 5Al17. 5Mn11 shape memory alloy10.1063/1.4964621 ↗
31. Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys10.1016/j.actamat.2016.08.065 ↗
32. Energy barriers and hysteresis in martensitic phase transformations10.1016/j.actamat.2009.05.034 ↗
33. Stress dependence of the hysteresis in single crystal NiTi alloys10.1016/j.actamat.2004.03.038 ↗
34. Stress hysteresis and temperature dependence of phase transition stress in nanostructured NiTi—effects of grain size10.1063/1.4812643 ↗
35. On non-monotonic rate dependence of stress hysteresis of superelastic shape memory alloy bars10.1016/j.ijsolstr.2011.02.017 ↗
36. Orientation dependence of superelasticity and stress hysteresis in Cu–Al–Mn alloy10.2320/matertrans.MT-MJ2019008 ↗
37. On the decrease in transformation stress in a bicrystal cu-al-mn shape-memory alloy during cyclic compressive deformation10.3390/ma14164439 ↗
38. Orientation dependence of elastocaloric effect in a Cu71.3Al17.5Mn11.2 single crystal10.1016/j.jallcom.2023.172392 ↗
39. Inhomogeneous martensitic transformation behavior and elastocaloric effect in a bicrystal Cu-Al-Mn shape memory alloy10.1016/j.msea.2020.140386 ↗
40. The roles of grain orientation and grain boundary characteristics in the enhanced superelasticity of Cu71.8Al17.8Mn10.4 shape memory alloys10.1016/j.matdes.2014.07.070 ↗
41. Grain size dependence of pseudoelasticity in polycrystalline Cu–Al–Mn-based shape memory sheets10.1016/j.actamat.2013.03.022 ↗
42. Full-field stress and strain measurements revealing energy dissipation characteristics in martensitic band of Cu-Al-Mn shape memory alloy
43. Melt-cast microfibers of Cu-based shape memory alloy adopt a favorable texture for superelasticity10.1016/j.scriptamat.2016.02.011 ↗
44. Enhanced cyclic stability of elastocaloric effect in oligocrystalline Cu–Al–Mn microwires via cold-drawing10.1016/j.ijrefrig.2020.02.020 ↗
45. Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire10.1016/j.actamat.2005.05.013 ↗
46. Oßmer · 2017
47. A review and analysis of the elasto-caloric effect for solid-state refrigeration devices: challenges and opportunities10.1557/mre.2015.17 ↗
48. Reduced dimensions elastocaloric materials: a route towards miniaturized refrigeration10.1016/j.matdes.2021.109784 ↗
49. Effects of strain rate and measuring temperature on the elastocaloric cooling in a columnar-grained Cu71Al17.5Mn11.5 shape memory alloy10.3390/met7120527 ↗
50. Superelasticity at low temperatures in Cu-17Al-15Mn (at%) shape memory alloy10.2320/matertrans.M2011128 ↗
51. Tuning the operation temperature window of the elastocaloric effect in Cu–Al–Mn shape memory alloys by composition design10.1016/j.jallcom.2020.154265 ↗
52. Deformation and fracture behaviour of the Heusler alloy Cu2MnAl single crystals10.1016/0001-6160(84)90138-X ↗
53. Thermoelastic martensite and shape memory effect in ductile Cu-Al-Mn alloys10.1007/BF02651873 ↗
54. Martensitic transformation in a mictomagnetic Cu-Al-Mn alloy10.1016/S1359-6462(01)00917-4 ↗
55. The influence of β phase aging on the martensitic transformation temperatures of CuMnAl alloys10.1016/S1359-6462(97)00473-9 ↗
56. X-ray absorption spectroscopy study of the local atomic structure in a ductile Cu-Al-Mn shape memory alloy10.1016/j.mtla.2023.101918 ↗
57. Morphological and chemical analysis of bainite in Cu–17Al–11Mn (at.%) alloys by using orthogonal FIB-SEM and double-EDS STEM
58. Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn system10.1016/S0925-8388(97)00425-8 ↗
59. Ductile shape memory alloys of the Cu-Al-Mn system
60. Effects of ageing on bainitic and thermally induced martensitic transformations in ductile Cu–Al–Mn-based shape memory alloys10.1016/j.actamat.2009.08.003 ↗
61. Effects of aging treatment on the microstructure and superelasticity of columnar-grained Cu71Al18Mn11 shape memory alloy10.1007/s12613-016-1335-8 ↗
62. The influence of short-range disorder on te martensitic transformation in Cu-Zn and Cu-Zn-Al alloys10.1016/0001-6160(79)90111-1 ↗
63. Order-disorder transitions of Cu-Al-Mn shape-memory alloys10.1103/PhysRevB.58.14245 ↗
64. Quenching effects in Cu–Al–Mn shape memory alloy10.1016/S0921-5093(99)00434-7 ↗
65. The stabilization of martensite in Cu-Al-Mn alloys10.1007/BF00551322 ↗
66. Effect of aging treatment on mechanical properties of Bamboo-Liked Crystalline CuAlMn alloy wires
67. Effect of aging treatment on damping capacity in Cu–Al–Mn shape memory alloy10.1016/j.jallcom.2019.153213 ↗