journal article·2023-12Open access

Microstructure, mechanical and corrosion properties of FeCrNiCoMnSi0.1 high-entropy alloy coating via TIG arc melting technology and high-frequency ultrasonic impact with welding

Yiliang He, Mengqi Cong, Weining Lei, Yuhong Ding, Tianle Xv, Zilong Han

Abstract

With the increase in studies on high-entropy alloys and their impressive structural properties, the preparation processes and applications of high-entropy alloys have become a popular research topic in metallic materials. In this paper, the preparation of FeCrNiCoMnSi0.1 high-entropy alloy coatings was carried out by the follow-welding high-frequency power ultrasonic impact composite TIG arc melting process, the effects of different power ultrasonic impacts on the microstructure and properties of the coatings are investigated. The results showed that the average grain size is reduced by 74 % (from 278 μm to 72 μm), the average microhardness is increased by 41 % from 568 HV1 to 807 HV1, the abrasion resistance is improved by 68 % under the effect of ultrasonic impact. The ultrasonic impact treatment process can effectively refine the microstructure of the coatings and improve the strength of grain boundaries. The corrosion resistance of the coating in 3.5 wt% NaCl solution is enhanced by 65 %, the corrosion type was changed from intergranular corrosion to uniform corrosion. This is mainly caused by the ultrasonic impact treatment which suppresses the elemental segregation of Cr and Mn and improves the grain boundary strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Nanostructured HEAs with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys Materials10.1016/j.msea.2003.10.257 ↗
3. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
4. Physical metallurgy of concentrated solid solutions from low-entropy to HEAs10.1016/j.cossms.2017.09.002 ↗
5. Design and characterization on microstructure evolution and properties of laser-cladding Ni1.5CrFeTi2B0.5Mox high-entropy alloy coatings10.1016/j.surfcoat.2020.126793 ↗
6. Recent advances of high entropy alloys for aerospace applications: a review10.1108/WJE-01-2021-0040 ↗
7. Microstructure and properties of TiNbZrMo high entropy alloy coating10.1016/j.matlet.2020.129004 ↗
8. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
9. High temperature oxidation behavior of Al0.6CrFeCoNi and Al0.6CrFeCoNiSi0.3 high entropy alloys10.1016/j.jallcom.2018.06.036 ↗
10. Nanocrystalline CoCrFeNiMn high-entropy alloy with tunable ferromagnetic properties10.1016/j.jmst.2020.10.060 ↗
11. Physical metallurgy of concentrated solid solutions from low-entropy to high-entropy alloys10.1016/j.cossms.2017.09.002 ↗
12. Improving anti-corrosion properties of CoCrFeMnNi high entropy alloy by introducing Si into nonmetallic inclusions10.1016/j.corsci.2022.110616 ↗
13. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi HEA10.1016/j.actamat.2013.06.018 ↗
14. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
15. Molecular dynamics simulation and machine learning of mechanical response in non-equiatomic FeCrNiCoMn HEA10.1016/j.jmrt.2021.06.021 ↗
16. Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C10.1016/j.corsci.2022.110504 ↗
17. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution10.1016/j.matchemphys.2005.01.001 ↗
18. Effects of Ti-to-Al ratios on the phases, microstructures, mechanical properties, and corrosion resistance of Al2-xCoCrFeNiTix high-entropy alloys10.1016/j.jallcom.2019.07.100 ↗
19. Oxide MnCr2O4 induced pitting corrosion in high entropy alloy CrMnFeCoNi10.1016/j.mtla.2019.100275 ↗
20. A new model for studing the evaporation behavior of alloy elements in DD98M alloy during electron beam smelting10.1016/j.vacuum.2021.110641 ↗
21. Lightweight AlCrTiV HEAs with dual-phase microstructure via microalloying10.1007/s10853-018-2970-4 ↗
22. Errata: "pitting corrosion of metals. A review of the critical factors"10.1149/1.1838748 ↗
23. Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys10.1016/j.matlet.2020.128809 ↗
24. The influence of incorporation of Mn on the pitting corrosion performance of CrFeCoNi High Entropy Alloy at different temperatures10.1016/j.matdes.2019.108170 ↗
25. Microstructure and corrosion resistance of AlCoCrFeNi HEA coating on sintered NdFeB magnets prepared by HVOF spraying10.1016/j.jmmm.2022.169136 ↗
26. Improving anti-corrosion properties of CoCrFeMnNi high entropy alloy by introducing Si into nonmetallic inclusions10.1016/j.corsci.2022.110616 ↗
27. Mechanical properties of FeMnCoCr high entropy alloy alloyed with C/Si at low temperatures10.1016/j.jallcom.2020.157876 ↗
28. The oxidation behavior of the quinary FeCoNiCrSix HEAs10.1016/j.matchemphys.2017.06.017 ↗
29. Mechanical and corrosion properties of additively manufactured CoCrFeMnNi high entropy alloy
30. Pores-free aluminium alloy by efficient degassing ultrasonic treatments
31. Improvement strategy for the geometric accuracy of bead's beginning and end parts in wire-arc additive manufacturing (WAAM)10.1007/s00170-021-08037-8 ↗
32. Multi-scale defects in powder-based additively manufactured metals and alloys10.1016/j.jmst.2022.02.015 ↗
33. Surface modification of magnesium alloys using thermal and solid-state cold spray processes: challenges and latest progresses10.1016/j.jma.2022.07.012 ↗
34. Development and property Tuning of refractory HEAs: a review10.1007/s40195-022-01382-x ↗
35. Chemical inhomogeneity inhibits grain boundary fracture: a comparative study in CrCoNi medium entropy alloy10.1016/j.jmst.2023.02.002 ↗
36. Modification of droplet morphology and arc oscillation by magnetic field in laser-MIG hybrid welding10.1016/j.optlaseng.2020.106138 ↗
37. The influence of stacking fault energy on mechanical properties of Cu-Al-Zn alloys processed by surface mechanical attrition treatment10.1016/j.msea.2018.12.021 ↗
38. Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 104510.1016/j.optlastec.2018.09.030 ↗
39. Understanding dual-frequency ultrasonic melt treatment on grain refinement and mechanical properties improvement of AZ80 magnesium alloy: experiment and simulation10.1016/j.jmrt.2021.10.083 ↗
40. Influence of ultrasonic vibration on molten pool behavior and deposition layer forming morphology for wire and arc additive manufacturing10.1016/j.icheatmasstransfer.2021.105789 ↗
41. Phase separation technology based on ultrasonic standing waves: a review10.1016/j.ultsonch.2018.06.006 ↗
42. Microstructure and high temperature properties of laser cladded WTaNbMo refractory high entropy alloy coating assisted with ultrasound vibration10.1016/j.jallcom.2022.165888 ↗
43. Ultrasonic induces grain refinement in gas tungsten arc cladding AlCoCrFeNi HEA coatings10.1016/j.msea.2021.141607 ↗
44. Stress relaxation due to ultrasonic impact treatment on multi-pass welds10.1179/1362171814Y.0000000219 ↗
45. Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD10.1016/j.msea.2023.144946 ↗
46. Non-monotonic variation of structural and tensile properties with Cr content in AlCoCrxFeNi2 high entropy alloys10.1016/j.jallcom.2019.05.211 ↗
47. Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy10.1016/j.actamat.2014.10.033 ↗
48. AlCoCuFeNi high-entropy alloy with tailored microstructure and outstanding compressive properties fabricated via selective laser melting with heat treatment10.1016/j.msea.2018.11.118 ↗
49. Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing10.1016/j.jallcom.2022.164957 ↗
50. Material flow, microstructure and mechanical properties of friction stir welded AA 2024-T3 enhanced by ultrasonic vibrations10.1016/j.jmapro.2017.10.008 ↗
51. Grain structure and texture evolution across the deflected laser welded Fe-Cu dissimilar joint10.1016/j.matchar.2021.111712 ↗
52. Lattice distortion as an estimator of solid solution strengthening in HEAs10.1016/j.matchar.2021.110877 ↗
53. Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition
54. Grain refinement and mechanism of steel in ultrasound assisted wire and arc additive manufacturing10.1016/j.icheatmasstransfer.2023.106724 ↗
55. Static recrystallization behavior of the cold-rolled Mg-1Al-1Zn-0.1Ca-0.2Y magnesium alloy sheet10.1016/j.jallcom.2022.168508 ↗
56. Microstructure evolution and deformation behaviors of pulse electro-assisted deformation in M50 bearing steel10.1016/j.jmrt.2023.02.156 ↗
57. Excellent corrosion resistance of electron beam welded joint and remelted layer of eutectic HEA AlCoCrFeNi2.110.1016/j.intermet.2023.107822 ↗
58. High entropy intermetallic coatings fabricated by detonation spraying10.1016/j.matlet.2021.131560 ↗
59. Al–Mn–Fe intermetallic formation in AZ91 magnesium alloys: effects of impurity iron10.1016/j.intermet.2022.107465 ↗
60. Fabrication and formation mechanism of vacuum cladding Ni/WC/GO composite fusion coatings
61. Segregation in the magnesium/aluminum composites formed by cold arc cladding10.1016/j.matchemphys.2021.124571 ↗
62. Effect of in-situ ultrasonic impact treatment on flow and solidification behavior of laser metal deposition: by finite element simulation10.1016/j.ijheatmasstransfer.2022.122914 ↗
63. Investigation of short-term creep properties of a coarse-grained Inconel 718 fabricated by directed energy deposition compared to traditional Inconel 71810.1016/j.msea.2022.143143 ↗
64. Solidification microstructure evolution and its corresponding mechanism of metastable immiscible Cu80Fe20 alloy with different cooling conditions10.1016/j.jallcom.2018.01.306 ↗
65. Microstructure and mechanical properties of a newly developed WTaRe refractory alloy by selective electron beam melting
66. Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening10.1016/j.matchar.2021.111179 ↗
67. On the influence of varying the crystallographic texture of alumina CVD coatings on cutting performance in steel turning10.1016/j.ijmachtools.2022.103885 ↗
68. Galvanic current analysis of AA6016/SM490 couple using experimental and numerical simulation data in various NaCl solutions10.1016/j.corsci.2022.110918 ↗
69. Investigation on the corrosion behavior of Alloy 800H at various levels of deformation10.1016/j.corsci.2022.110926 ↗
70. Improving the corrosion resistance of Fe-21Cr-9Mn alloy in liquid zinc by heat treatment10.1016/j.corsci.2016.05.018 ↗
71. Highly dispersed Cu produced by mechanical stress-activated redox reaction to establish Galvanic corrosion in Fe Implant10.1021/acsbiomaterials.2c00831 ↗
72. The mechanoelectrochemical effect on the electrochemical corrosion of austenitic stainless steel10.1016/j.jmrt.2023.03.030 ↗
73. Identifying the dominant electrochemical reaction in electrochemical impedance spectroscopy10.1016/j.electacta.2021.139460 ↗
74. Microstructure and wear resistance property of laser cladded CrCoNi coatings assisted by ultrasonic impact treatment10.1016/j.jmrt.2022.11.170 ↗
75. Microstructure and grain boundary corrosion mechanism of Pearlitic material10.1007/s11665-021-06171-8 ↗
76. Influence of effective strain on the corrosion behavior of nickel-based GH4710 superalloy in chloride solutions10.1016/j.corsci.2022.110386 ↗
77. Excellent strength-ductility synergy and corrosion resistance in a metastable high entropy alloy via heterogeneous structure design10.1016/j.jallcom.2023.168979 ↗
78. Godlewska
79. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗