journal article·2019-05

Aniline trimer based chemical sensor for dual responsive detection of hazardous CN¯ ions and pH changes

P. Madhusudhana Reddy, Shih-Rong Hsieh, Ming-Ching Lee, Chi-Jung Chang, Arul Pundi, Yi-Shao Chen, Chien-Hsing Lu, Jui-Ming Yeh

Dyes and Pigments· Volume 164
Publisher page

Abstract

Abstract It is still a challenging task to make a colorimetric sensor which can respond to multiple responses at the same time. This task is even more difficult in aqueous solutions, as water molecules will significantly interfere the sensing process. Therefore, we have designed the low-cost, simple, efficient and selective dual responsive chemical sensor (DRCS) by capping the aniline trimer with benzoyl isothiocyanate. This sensor combines the advantages of naked eye detection of the CN¯ ion at different pH values. Moreover, DRCS can detect the pH of mixed solvent (DMSO/H2O) by the naked eye. The DRCS has shown high sensitivity to CN¯ ions. Meanwhile, it has no obvious response to other interfering anions, such as F¯, AcO¯, Br¯, HSO4¯, SCN¯, PO43¯, I¯, ClO4¯, Cl¯, NO3¯, PF6¯, and BF4¯. A minimum detection limit of 0.2 μM was achieved by DRCS for CN¯ ions. The feasibility of on-site detection of CN¯ was demonstrated using DRCS coated filter paper stripes. The present study reveals that the DRCS as low-cost material can be used as a potential sensor for the selective sensing of CN¯ ions and pH in the solutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molecular Sensors and Ion Detection · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. In-situ synthesis of Zn doped polyaniline on graphene oxide for inhibition of mild steel corrosion in 3.5 wt.% chloride solution10.1016/j.jiec.2018.02.033 ↗
2. Electrochemical route to prepare polyaniline-coated meshes with controllable pore size for switchable emulsion separation10.1016/j.cej.2016.06.073 ↗
3. Multi-stimuli responsive and multi-functional oligoaniline-modified vitrimers10.1039/C6SC02855A ↗
4. Advanced anticorrosive coatings prepared from the mimicked xanthosoma sagittifolium-leaf-like electroactive epoxy with synergistic effects of superhydrophobicity and redox catalytic capability10.1021/cm1030377 ↗
5. ZnS/polyaniline composites with improved dispersing stability and high photocatalytic hydrogen production activity10.1016/j.ijhydene.2016.07.155 ↗
6. Study on the selectivity of anion receptors based on similar (thio) urea fragments10.1007/s10895-012-1110-9 ↗
7. Fabrication of two-dimensional photonic crystals of tethered polyvinyltetrazole on silicon surfaces for visualization in Cu2+ ion sensing10.1016/j.dyepig.2016.11.047 ↗
8. A simple fluorescent film probe for the detection of fluoride anion in organic solution10.1016/j.dyepig.2018.02.004 ↗
9. Synthesis, structure, spectral, electrochemical and sensing properties of 3-amino boron-dipyrromethene and its derivatives10.1016/j.dyepig.2013.10.038 ↗
10. A new naphthalimide derivative as a selective fluorescent and colorimetric sensor for fluoride, cyanide and CO210.1016/j.dyepig.2015.04.029 ↗
11. A reaction based colorimetric chemosensor for the detection of cyanide ion in aqueous solution10.1016/j.snb.2017.02.015 ↗
12. Robust, sensitive and facile method for detection of F−, CN− and Ac− anions10.1016/j.saa.2017.06.004 ↗
13. Isophorone-based aldehyde for “ratiometric” detection of cyanide by hampering ESIPT10.1016/j.dyepig.2017.04.050 ↗
14. Two novel CN turn on fluorescent imaging materials with twin binding groups10.1016/j.snb.2016.08.051 ↗
15. Recent progress in the development of fluorometric and colorimetric chemosensors for detection of cyanide ions10.1039/c4cs00008k ↗
16. Naphthalene based lab-on-a-molecule for fluorimetric and colorimetric sensing of F− and CN− and nitroaromatic explosives10.1016/j.snb.2016.09.154 ↗
17. A novel highly selective probe with both aggregation-induced emission enhancement and intramolecular charge transfer characteristics for CN− detection10.1016/j.snb.2017.10.167 ↗
18. A review: the trend of progress about pH probes in cell application in recent years10.1039/C6AN01942K ↗
19. Novel benzimidazole-based ratiometric fluorescent probes for acidic pH10.1016/j.dyepig.2017.09.043 ↗
20. Luminescent probes for sensitive detection of pH changes in live cells through two near-infrared luminescence channels10.1021/acssensors.7b00137 ↗
21. A ratiometric fluorescence probe for monitoring cyanide ion in live cells10.1016/j.snb.2016.01.033 ↗
22. A new “donor-two-acceptor” red emission fluorescent probe for highly selective and sensitive detection of cyanide in living cells10.1016/j.snb.2015.02.074 ↗
23. A novel indolium salt as a highly sensitive and selective fluorescent sensor for cyanide detection in water10.1016/j.jhazmat.2017.01.024 ↗
24. Experimental and theoretical study of urea and thiourea based new colorimetric chemosensor for fluoride and acetate ions10.1016/j.saa.2015.07.065 ↗
25. Dynamic measurement of carbon dioxide volumetric mass transfer coefficient in a well-mixed reactor using a pH probe: analysis of the salt and supersaturation effects10.1021/ie0711776 ↗
26. Novel Y-type two-photon active fluorophore: synthesis and application in fluorescent sensor for cysteine and homocysteine10.1016/j.tetlet.2007.01.158 ↗
27. Near infrared fluorescence-based bacteriophage particles for ratiometric pH imaging10.1021/bc800188p ↗
28. Novel fluorescent pH sensors and a biological probe based on anthracene derivatives with aggregation-induced emission characteristics10.1021/la904727t ↗
29. Fluorescence probe with a pH-sensitive trigger10.1021/bc050330e ↗
30. Carboxy SNARF-4F as a fluorescent pH probe for ensemble and fluorescence correlation spectroscopies10.1021/jp0510138 ↗
31. Heptamethine cyanine dyes with a large Stokes shift and strong fluorescence: a paradigm for excited-state intramolecular charge transfer10.1021/ja043413z ↗
32. Colorimetric optical pH sensor production using a dual-color system10.1016/j.snb.2010.01.068 ↗
33. A visible colorimetric pH sensitive chemosensor based on azo dye of benzophenone10.1016/j.dyepig.2011.03.003 ↗
34. An efficient fluorescent probe for ratiometric pH measurements in aqueous solutions10.1002/anie.200460557 ↗
35. A new water-soluble near-neutral ratiometric fluorescent pH indicator10.1021/ol7026366 ↗
36. Wavelength-ratiometric near-physiological pH sensors based on 6-aminoquinolinium boronic acid probes10.1016/j.talanta.2004.11.030 ↗
37. A tunable pH-sensing system based on Ag nanoclusters capped by hyperbranched polyethyleneimine with different molecular weights10.1016/j.talanta.2015.09.023 ↗
38. A highly selective sensor for cyanide in organic media and on solid surfaces10.3390/s16030271 ↗
39. Quinone based oligomeric sensors as colorimetric probes for cyanide anion: effects of solvent medium and substituent on sensing10.1016/j.reactfunctpolym.2017.12.007 ↗
40. Detection of cyanide ions in aqueous solutions using cost effective colorimetric sensor10.1016/j.jhazmat.2017.04.001 ↗
41. Specific recognition and sensing of CN¯ in sodium cyanide solution10.1021/ol101281x ↗
42. Colorimetric probes based on anthraimidazolediones for selective sensing of fluoride and cyanide ion via intramolecular charge transfer10.1021/jo201290a ↗
43. Connors · 1987 · vol. 33
44. A spectrophotometric investigation of the interaction of iodine with aromatic hydrocarbons10.1021/ja01176a030 ↗
45. Miller · 2018
46. Colorimetric probes based on anthraimidazolediones for selective sensing of fluoride and cyanide ion via intramolecular charge transfer10.1021/jo201290a ↗
47. Azo dyes featuring with nitrobenzoxadiazole (NBD) unit: a new selective chromogenic and fluorogenic sensor for cyanide ion10.1016/j.snb.2011.10.069 ↗
48. Colorimetric detection of Cu2+ in aqueous solution and on the test kit by 4-aminoantipyrine derivatives10.1016/j.snb.2015.11.113 ↗
49. Chemodosimeter for CN−– interplay between experiment and theory10.1039/c2dt30854a ↗
50. A simple yet highly selective colorimetric sensor for cyanide anion in an aqueous environment10.1039/b808589g ↗
51. A modest colorimetric chemosensor for investigation of CN− in semi-aqueous environment with high selectivity and sensitivity10.1016/j.snb.2016.02.014 ↗
52. A single chemosensor for multiple target anions: the simultaneous detection of CN− and OAc− in aqueous media10.1016/j.snb.2014.05.124 ↗
53. A new bis-pyrene derivative as a selective colorimetric and fluorescent chemosensor for cyanide and fluoride and anion-activated CO2 sensing10.1016/j.snb.2014.04.005 ↗
54. Cyanide and fluoride colorimetric sensing by novel imidazo-anthraquinones functionalised with indole and carbazole10.1080/10610278.2013.824082 ↗