Coupled interfacial bonding and elastic mismatch effects on the thermal conductance enhancement in carbon nanohorn-reinforced fly ash geopolymers
Source abstract
Abstract
Improving heat extraction performance and energy efficiency requires great efforts to develop new thermal conductive low-carbon materials. Here, a novel strategy for enhancing the thermal conductance of fly ash geopolymers through the incorporation of thermally conductive nanofillers including carbon nanohorn (CNH) and nanotube (CNT) is presented. Reactive molecular dynamics simulations are employed to elucidate, at the atomic scale, the coupled effects of interfacial bonding and the elastic modulus mismatch between carbon nanofillers and geopolymer matrix on thermal conductivity. Results indicate that when interfacial bonding is considered, the addition of 3.41 wt% CNH induces a remarkable enhancement in thermal conductivity of 177.21%, whereas the maximum increase achieved with CNT is limited to 71.73% at dosage of 4.74 wt%. This significant difference is attributed to the lower elastic modulus mismatch with the geopolymer matrix and the resulting reduction in phonon scattering at the interface. Furthermore, the calculated Kapitza thermal resistance demonstrates that increasing CNH concentration effectively reduces interfacial thermal resistance. Although CNTs possessing high intrinsic thermal conductivity, they are limited by aggregation and weak interfacial phonon coupling in the geopolymer matrix, while the high-curvature morphology of CNH, interact more intimately with the matrix, increasing the surface contact for more effective interfacial heat transfer. These findings identify carbon nanohorns as highly efficient and promising nanofiller for the design of next-generation thermally conductive low-carbon geopolymer nanocomposites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Thermal analysis and optimization of an ice and snow melting system using geothermy by super-long flexible heat pipes10.1016/j.applthermaleng.2016.11.007 ↗
2. Melting snow on airport cement concrete pavement with carbon fibre heating wires10.1179/1432891715Z.0000000002097 ↗
3. Piezoelectric response and failure behavior of cement paste under external loading10.1016/j.cemconres.2020.106257 ↗
4. Novel properties of Nano-engineered concrete with fullerene buckyballs10.1016/j.cemconcomp.2021.103960 ↗
5. Preventing cement-based materials failure by embedding Fe2O3 nanoparticles10.1016/j.conbuildmat.2020.120466 ↗
6. Wettability and work of adhesion of water nanodroplet on (001) surface of cement paste10.1016/j.cemconres.2022.106896 ↗
7. Influence of single-walled carbon nanotubes structure and density on the ductility of cement paste10.1016/j.conbuildmat.2018.03.244 ↗
8. Molecular-scale insight into improved waterproofing of cement paste by protective epoxy resins nano-coating10.1016/j.powtec.2023.118679 ↗
9. Insight into elastic behavior of calcium silicate hydrated oxide (C–S–H) under pressure and composition effect10.1016/j.cemconres.2011.10.003 ↗
10. Understanding why Alite is responsible of the main mechanical characteristics in Portland cement10.1016/j.cemconres.2019.105916 ↗
11. Research progress on numerical models for self-healing cementitious materials10.1002/admi.201701378 ↗
12. Influence of single-walled carbon nanotubes structure and density on the ductility of cement paste10.1016/j.conbuildmat.2018.03.244 ↗
13. Enhancing the interfacial bond strength of cement nanocomposite with carbonate nanostructure10.1016/j.compositesb.2017.05.057 ↗
14. Understanding of bonding and mechanical characteristics of cementitious mineral tobermorite from first principles10.1002/jcc.21622 ↗
15. Role of porosity on the stiffness and the stability of the (001) surface of the nanogranular C-S-H gel10.1016/j.cemconres.2016.04.014 ↗
16. Behaviour of cement concrete at high temperature10.2478/bpasts-2013-0013 ↗
17. Micro- and nano-scale characterization to study the thermal degradation of cement-based materials10.1016/j.matchar.2014.02.010 ↗
18. Temperature effects on local structure, phase transformation, and mechanical properties of calcium silicate hydrates10.1111/jace.17881 ↗
19. Comparison of material properties of cement paste at high temperatures
20. Developing lightweight structural concrete with enhanced thermal and durability properties through nano-silica and expanded polystyrene integration10.1038/s41598-025-11354-7 ↗
21. Young's modulus of cement paste at elevated temperatures10.1016/j.cemconres.2006.11.006 ↗
22. .
23. Kerr · 2007
24. Coupled effect of elevated thermal exposure and nanochannel confined water on the phase transformations and mechanical changes in calcium silicate hydrates paste
25. Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials10.1016/j.conbuildmat.2018.12.057 ↗
26. Low-carbon treatment of zinc contaminated iron tailings using high-calcium geopolymer: influence of wet-dry cycle coupled with acid attack10.1016/j.jclepro.2022.130636 ↗
27. A critical review of geopolymer properties for structural fire-resistance applications10.1016/j.conbuildmat.2019.06.076 ↗
28. Environmental and energy benefits assessment of alkali-activated concrete (AAC) energy pile
29. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
30. Preparation and thermal properties of fire resistant metakaolin-based geopolymertype coatings10.1016/j.jnoncrysol.2010.09.063 ↗
31. Temuujin · Appl. Clay Sci. · 2009 · 46 · 26510.1016/j.clay.2009.08.015 ↗
32. Temuujin · J. Non-Cryst. Solids · 2011 · 357 · 139910.1016/j.jnoncrysol.2010.09.063 ↗
33. Unveiling the ductile character of nano-reinforced geopolymer/CNT subjected to elevated temperatures
34. Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements10.1016/j.jeurceramsoc.2011.12.030 ↗
35. Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete10.1016/j.cemconcomp.2015.03.013 ↗
36. An experimental investigation on Flyash-based Geopolymer mortar under different curing regime for thermal Analysis10.1016/j.enbuild.2016.12.079 ↗
37. Microstructure and properties of metakaolin-based inorganic polymer foams10.1007/s10853-013-7559-3 ↗
38. High-porosity geopolymer foams with tailored porosity for thermal insulation and wastewater treatment10.1557/jmr.2017.127 ↗
39. Influence of water and aluminium powder content on the properties of waste-containing geopolymer foams10.1016/j.ceramint.2018.01.009 ↗
40. Development of porous fly ash-based geopolymer with low thermal conductivity10.1016/j.matdes.2014.09.024 ↗
41. Development of porous fly ash-based geopolymer with low thermal conductivity10.1016/j.matdes.2014.09.024 ↗
42. Thermal and acoustic insulation properties in nanoporous geopolymer nanocomposite10.1016/j.cemconcomp.2023.104955 ↗
43. Effect of temperature and density variations on thermal conductivity of polystyrene insulation materials in Oman climate10.1007/s10891-015-1275-6 ↗
44. Thermal conductivity of several geopolymer composites and discussion of their formulation10.1111/ijac.14200 ↗
45. Thermo-physical characterization of a metakaolin-based geopolymer incorporating calcium carbonate: a case study
46. Rheology effect and enhanced thermal conductivity of diamond/metakaolin geopolymer fabricated by direct ink writing10.1108/RPJ-06-2020-0124 ↗
47. Enhanced thermal conductivity of geopolymer nanocomposites by incorporating interface engineered carbon nanotubes10.1016/j.coco.2021.100691 ↗
48. Thermo-mechanical and microstructural characterisation of sodium-poly(sialate-siloxo) (Na-PSS) geopolymers10.1007/s10853-006-0522-9 ↗
49. Cho · 2015
50. Single-wall carbon nanohorns and nanocones
51. Nano-aggregates of single-walled graphitic carbon nano-horns10.1016/S0009-2614(99)00642-9 ↗
52. Structure, properties, functionalization, and applications of carbon nanohorns10.1021/acs.chemrev.5b00611 ↗
53. Dos Santos · J. Phys. Chem. C · 2014 · 118 · 2476110.1021/jp5070209 ↗
54. Davidovits · 2008
55. Properties of geopolymer cements
56. ReaxFFSiO reactive force field for silicon and silicon oxide systems10.1021/jp0276303 ↗
57. Reactive molecular dynamics simulations of sodium silicate glasses—toward an improved understanding of the structure10.1111/ijag.12248 ↗
58. Molecular dynamics simulation of sodium aluminosilicate glass structures and glass surface-water reactions using the reactive force field (ReaxFF)10.1016/j.apsusc.2017.12.180 ↗
59. Tribochemistry of phosphoric acid sheared between quartz surfaces: a reactive molecular dynamics study10.1021/jp406360u ↗
60. Tribochemical mechanism of amorphous silica asperities in aqueous environment: a reactive molecular dynamics study10.1021/la5042663 ↗
61. Reactive molecular simulations of protonation of water clusters and depletion of acidity in H-ZSM-5 zeolite10.1039/C4CP02612H ↗
62. ReaxFF reactive molecular dynamics simulation of the hydration of Cu-SSZ-13 zeolite and the formation of Cu dimers10.1021/acs.jpcc.5b00699 ↗
63. Dynamics of confined reactive water in smectite clay–zeolite composites10.1021/ja208894m ↗
64. Ab initio molecular dynamics study of the interlayer and micropore structure of aqueous montmorillonite clays10.1016/j.gca.2015.07.013 ↗
65. High strength metakaolin-based geopolymer reinforced by pristine and covalent functionalized carbon nanotubes10.1016/j.conbuildmat.2022.126910 ↗
66. Residual water and interfacial bonding effects on the mechanical performance of CNT/fly ash geopolymer binder10.1002/suco.202301055 ↗
67. Theoretical investigation of protective graphene-coated metakaolin aluminosilicate interface under moisture and chemical composition effects
68. Non-equilibrium momentum exchange algorithm for molecular dynamics simulation of heat flow in multicomponent systems10.1080/0026897031000154338 ↗
69. Molecular dynamics calculation of the thermal conductivity of vitreous silica10.1103/PhysRevB.59.13707 ↗
70. Enhanced thermal conductivity of geopolymer nanocomposites by incorporating interface engineered carbon nanotubes10.1016/j.coco.2021.100691 ↗
71. High-density graphene/single-walled carbon nanohorn composite supercapacitor electrode with high volumetric capacitance10.1016/j.apsusc.2019.05.332 ↗
72. Measuring the diffusion coefficient of single-wall carbon nanotubes in liquids10.1088/1742-6596/1677/1/012174 ↗
73. Thermal transport in polymeric materials and across composite interfaces10.1016/j.apmt.2018.04.004 ↗
74. Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: the state of the art10.1016/j.compstruct.2019.111244 ↗
75. Elastic moduli of carbon nanohorns
76. Prediction of Young's modulus of single wall carbon nanotubes by molecular-mechanics based finite element modelling
77. Broad low-frequency phonon resonance for increased across-tube heat transport10.1103/PhysRevB.105.165406 ↗
78. Interface effect on thermal conductivity of carbon nanotube composites10.1063/1.1808874 ↗
79. Acoustic mismatch model for thermal contact resistance of vander waals contacts10.1063/1.3075065 ↗
80. Kapitza conductance of silicon–amorphous polyethylene interfaces by molecular dynamics simulations10.1103/PhysRevB.79.104305 ↗