Overcoming the trade-off between Voc and Jsc: Asymmetric chloro-substituted two-dimensional benzo[1,2-b:4,5-b′]dithiophene-based polymer solar cells
Source abstract
Abstract
Abstract To achieve the high PCE and simultaneously overcome the trade-off between open circuit voltage (VOC) and short-circuit current density (JSC), the reasonable design of the donor material is still a great challenge in non-fullerene polymer solar cells (PSCs). Herein, a pair of asymmetric 2D BDT-based wide band gap polymers, named PBPTBz-1Cl and PBPTBz-2Cl, respectively, were designed and synthesized through simultaneously introducing a chloro-substituted thiophene and another alkoxylphenyl groups as side chains onto the same BDT unit. As expected, the polymers PBPTBz-1Cl and PBPTBz-2Cl exhibit the deeper HOMO levels of −5.32 and −5.41 eV, respectively, compared with the HOMO value of −5.27 eV for chlorine-free substituted polymer PBPTBz-0Cl. Therefore, the PBPTBz-2Cl:IT-M based PSCs exhibited a higher Voc of 0.99 V, with an enhanced Jsc of 14.92 mA cm−2 and PCE of 7.18%. The Voc, Jsc and PCE were simultaneously enhanced from PBPTBz-0Cl:IT-M to PBPTBz-1Cl:IT-M, then to PBPTBz-2Cl:IT-M based PSCs successively. These results demonstrate that the challenge of the trade-off between Voc and Jsc could be overcome through the asymmetric strategy of the chloro-substituted thiophene and alkylphenyl groups as different side chains onto the same BDT unit. Hence, considering the low cost of starting materials and convenient introduction of chlorine atoms, the asymmetric chlorination of the side chain of BDT unit would be the great potential for achieving the high-performance PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
2. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
3. A halogenation strategy for over 12% efficiency nonfullerene organic solar cells10.1002/aenm.201702870 ↗
4. High-performance thick-film all-polymer solar cells created via ternary blending of a novel wide-bandgap electron-donating copolymer10.1002/aenm.201703085 ↗
5. Surprising effects upon inserting benzene units into a quaterthiophene-based d-a polymer–improving non-fullerene organic solar cells via donor polymer design10.1002/aenm.201602304 ↗
6. A chlorinated polymer promoted analogue Co-donors for efficient ternary all-polymer solar cells
7. A chlorinated π-conjugated polymer donor for efficient organic solar cells10.1016/j.joule.2018.05.010 ↗
8. Simultaneous increase in open-circuit voltage and efficiency of fullerene-free solar cells through chlorinated thieno[3,4-b]thiophene polymer donor10.1021/acsenergylett.7b00551 ↗
9. Impact of side-chain fluorination on photovoltaic properties: fine tuning of the microstructure and energy levels of 2D-conjugated copolymers10.1039/C7TA04098A ↗
10. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
11. High-performance all-polymer nonfullerene solar cells by employing an efficient polymer-small molecule acceptor alloy strategy10.1016/j.nanoen.2017.04.061 ↗
12. Thermally stable all-polymer solar cells with high tolerance on blend ratios10.1002/aenm.201800029 ↗
13. Improved tandem all-polymer solar cells performance by using spectrally matched subcells10.1002/aenm.201703291 ↗
14. Correlation between structure and photovoltaic performance of a series of furan bridged donor–acceptor conjugated polymers10.1039/c3ta12210g ↗
15. A novel benzodipyrrolidone-based low band gap polymer for organic solar cells10.1039/c3ta12701j ↗
16. Controlling energy levels and blend morphology for all-polymer solar cells via fluorination of a naphthalene diimide-based copolymer acceptor10.1021/acs.macromol.6b01414 ↗
17. Fluoro-substituted n-type conjugated polymers for additive-free all-polymer bulk heterojunction solar cells with high power conversion efficiency of 6.71%10.1002/adma.201501214 ↗
18. Toward efficient polymer solar cells processed by a solution-processed layer-by-layer approach10.1002/adma.201802499 ↗
19. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
20. Effect of alkyl side chains of conjugated polymer donors on the device performance of non-fullerene solar cells10.1021/acs.macromol.6b01326 ↗
21. Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit10.1016/j.nanoen.2015.05.016 ↗
22. Efficient non-fullerene polymer solar cells based on a wide bandgap polymer of meta-alkoxy-phenyl-substituted benzodithiophene and difluorobenzotriazole10.1039/C7TA06476D ↗
23. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
24. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2d-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
25. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
26. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
27. High-performance wide bandgap copolymers using an edot modified benzodithiophene donor block with 10.11% efficiency10.1002/aenm.201602773 ↗
28. Synergistic effects of chlorination and a fully two-dimensional side-chain design on molecular energy level modulation toward non-fullerene photovoltaics10.1039/C7TA09837E ↗
29. Two-dimensional copolymers based on an alkylthionaphthyl-substituted benzo[1,2-b:4,5-b′]dithiophene for high-efficiency polymer solar cells10.1021/acsaem.7b00312 ↗
30. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
31. Organic solar cells based on a 2d benzo[1,2-b:4,5-b′]difuran-conjugated polymer with high-power conversion efficiency10.1002/adma.201503023 ↗
32. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (ptb7-th) for high performance10.1002/adma.201301476 ↗
33. Organic solar cells based on a 2d benzo[1,2-b:4,5-b']difuran-conjugated polymer with high-power conversion efficiency10.1002/adma.201503023 ↗
34. Fluorinated thiophene units improve photovoltaic device performance of donor–acceptor copolymers10.1021/acs.chemmater.7b01683 ↗
35. Fluorination of polythiophene derivatives for high performance organic photovoltaics10.1021/cm502229k ↗
36. From semi- to full-two-dimensional conjugated side-chain design: a way toward comprehensive solar energy absorption10.1021/acs.macromol.7b02045 ↗
37. Chlorination of side chains: a strategy for achieving a high open circuit voltage over 1.0 v in benzo[1,2-b:4,5-b′]dithiophene-based non-fullerene solar cells10.1021/acsaem.8b00506 ↗
38. Design and synthesis of chlorinated benzothiadiazole-based polymers for efficient solar energy conversion10.1021/acsenergylett.7b00092 ↗
39. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
40. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
41. Design of asymmetric benzodithiophene based wide band-gap conjugated polymers toward efficient polymer solar cells promoted by a low boiling point additive10.1039/C8TC00148K ↗
42. Stirring up acceptor phase and controlling morphology via choosing appropriate rigid aryl rings as lever arms in symmetry-breaking benzodithiophene for high-performance fullerene and fullerene-free polymer solar cells10.1002/adma.201705870 ↗
43. High-performance photovoltaic polymers employing symmetry-breaking building blocks10.1002/adma.201602857 ↗
44. Low band gap polymer solar cells with minimal voltage losses
45. Multichloro-substitution strategy: facing low photon energy loss in nonfullerene solar cells10.1021/acsaem.8b01447 ↗
46. Fine-tuning the side-chains of non-fullerene small molecule acceptors to match with appropriate polymer donors10.1039/C8TA00764K ↗