Nanostructured proton-exchange membranes from self-cross-linking perfluoroalkyl-free block-co-polymers
Source abstract
Abstract
A sustainable hydrogen economy relies on fuel cells and electrolyzers, which heavily depend on ion-conducting perfluoroalkylated materials such as Nafion or Aquivion. Together with other perfluorinated alkyl substances, their environmental accumulation, and the rising awareness of risks to human health stress the need for alternative materials. Based on block-co-polymers from octylstyrene and pentafluorostyrene, we present nanostructured proton-exchange membranes. In contrast to problematic perfluorinated alkyl constituents, the involved aromatic fluorine atoms allow mild functionalizations to form tetrafluorostyrene sulfonic acid. Meanwhile, the nonpolar block reduces the stiffness of the material. By introducing a new preparation technique, controlled mitigation of the thiol cross-linking allows membrane self-reinforcement during drying. The reinforcing cross-links enhance the dissolution stability and reduce the water uptake after 24 h down to 33 wt% at 85 °C. Cross-section imaging visualizes the influence of varying di- and tetrablock-co-polymer backbones on the membrane nanostructure with sizes between 20 and 35 nm. The membranes feature proton conductivities comparable to commercial materials at low humidity levels, surpassing commercial Nafion XL at 87 % relative humidity with up to 79 mS cm−1 at 105 °C. As first successful H2/air fuel cell tests achieve maximum power densities of up to 0.7 W cm−2, the nanostructured polymer membranes are a promising candidate for future fuel cell and electrolyzer applications without problematic perfluorinated alkyl substances.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane Separation and Gas Transport · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. PFAS: forever chemicals—persistent, bioaccumulative and mobile. Reviewing the status and the need for their phase out and remediation of contaminated sites
2. A new OECD definition for per- and polyfluoroalkyl substances10.1021/acs.est.1c06896 ↗
3. Legacy and emerging airborne per- and polyfluoroalkyl substances (PFAS) collected on PM2.5 filters in close proximity to a fluoropolymer manufacturing facility10.1039/D2EM00358A ↗
4. An overview of per- and polyfluoroalkyl substances (PFAS) in the environment: source, fate, risk and regulations10.3390/w12123590 ↗
5. Biological monitoring of polyfluoroalkyl substances: a review10.1021/es052580b ↗
6. 2019
7. Could the world go PFAS-free? Proposal to ban 'forever chemicals' fuels debate10.1038/d41586-023-02444-5 ↗
8. Gestational and chronic low-dose PFOA exposures and mammary gland growth and differentiation in three generations of CD-1 mice10.1289/ehp.1002741 ↗
9. Analysis of PFOA in dosed CD-1 mice. Part 2. Disposition of PFOA in tissues and fluids from pregnant and lactating mice and their pups10.1016/j.reprotox.2009.02.012 ↗
10. Perfluorooctanoic acid (PFOA) exposures and incident cancers among adults living near a chemical plant10.1289/ehp.1306615 ↗
11. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
12. Materials, technological status, and fundamentals of PEM fuel cells – a review10.1016/j.mattod.2019.06.005 ↗
13. Cross-linked proton-exchange membranes with strongly reduced fuel crossover and increased chemical stability for direct-isopropanol fuel cells10.1039/D2TA03832C ↗
14. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
15. Morphology of hydrated as-cast nafion revealed through cryo electron tomography10.1021/mz500606h ↗
16. Characterization of the thermolysis products of Nafion membrane: a potential source of perfluorinated compounds in the environment10.1038/srep09859 ↗
17. Review and prospects of PEM water electrolysis at elevated temperature operation10.1002/admt.202300281 ↗
18. High‐temperature operation of PEMFC using pore‐filling PTFE/Nafion composite membrane treated with electric field10.1002/er.7017 ↗
19. Water electrolysis using a porous IrO2/Ti/IrO2 catalyst electrode and nafion membranes at elevated temperatures10.3390/membranes11050330 ↗
20. Modification of phosphonated poly(pentafluorostyrene) toward ductile membranes for electrochemical applications10.1021/acs.macromol.3c01193 ↗
21. Emerging polyfluorinated compound Nafion by-product 2 disturbs intestinal homeostasis in zebrafish (Danio rerio)10.1016/j.ecoenv.2022.114368 ↗
22. Comparative hepatotoxicity of a novel perfluoroalkyl ether sulfonic acid, nafion byproduct 2 (H-PFMO2OSA), and legacy perfluorooctane sulfonate (PFOS) in adult male mice10.1021/acs.est.2c00957 ↗
23. Block copolymers for fuel cells10.1021/ma101247c ↗
24. Novel amphiphilic block copolymers derived from the selective fluorination and sulfonation of poly(styrene‐ block ‐1,3‐cyclohexadiene)10.1002/pola.25037 ↗
25. Novel multiblock-co-ionomers as potential polymer electrolyte membrane materials10.1002/pola.22269 ↗
26. Proton‐conductive membranes of sulfonated polyphenylsulfone10.1002/app.11264 ↗
27. Proton exchange membranes for polymer electrolyte fuel cells: an analysis of perfluorosulfonic acid and aromatic hydrocarbon ionomers10.1016/j.susmat.2023.e00727 ↗
28. Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes10.1016/j.memsci.2003.09.019 ↗
29. On the conductivity of proton-exchange membranes based on multiblock copolymers of sulfonated polysulfone and polyphenylsulfone: an experimental and modeling study10.3390/polym13030363 ↗
30. Ce–Mn bimetallic oxide-doped SPEEK/SPPO blend composite membranes to induce high oxidative tolerance and proton conductivity for hydrogen fuel cells10.1039/D4TA00470A ↗
31. Phase behavior of symmetric sulfonated block copolymers10.1021/ma702733f ↗
32. Characterization of sulfonated polystyrene-block-poly(ethyl-ran-propylene)-block-polystyrene copolymer for proton exchange membranes (PEMs)10.1016/j.memsci.2013.04.055 ↗
33. Transport properties of sulfonated poly(styrene-b-isobutylene-b-styrene) triblock copolymers at high ion-exchange capacities10.1021/ma051958n ↗
34. Poly(p-terphenyl alkylene)s grafted with highly acidic sulfonated polypentafluorostyrene side chains for proton exchange membranes10.1016/j.memsci.2022.120270 ↗
35. Sulfonated poly(pentafluorostyrene): synthesis & characterization10.1016/j.ssi.2013.06.010 ↗
36. Highly sulfonated poly(phenylene sulfone): preparation and stability issues10.1021/ma900333n ↗
37. Nucleophilic aromatic substitution
38. Metabolism of fluoroorganic compounds in microorganisms: impacts for the environment and the production of fine chemicals10.1007/s00253-009-2127-0 ↗
39. Hypersulfonated polyelectrolytes: preparation, stability and conductivity10.1039/C4PY01177E ↗
40. The stepped reaction of decafluorobiphenyl with thiophenol studied by in situ 19F NMR spectroscopy10.1016/j.jfluchem.2013.07.013 ↗
41. Postfunctionalization of a perfluoroarene-containing π-conjugated polymer via nucleophilic aromatic substitution reaction10.1021/acsmacrolett.9b01020 ↗
42. ETFE-g-pentafluorostyrene: functionalization and proton conductivity10.1016/j.eurpolymj.2014.12.017 ↗
43. Nanophase-separated block-co-polymers based on phosphonated pentafluorostyrene and octylstyrene for proton-exchange membranes10.1021/acsmaterialslett.3c00569 ↗
44. para fluoro-thiol clicked diblock-copolymer self-assembly: Towards a new paradigm for highly proton-conductive membranes10.1016/j.memsci.2022.120796 ↗
45. Synthesis of (S)-FTY720 vinylphosphonate analogues and evaluation of their potential as sphingosine kinase 1 inhibitors and activators10.1016/j.bmc.2013.02.042 ↗
46. Supramolecular materials via block copolymer self-assembly10.1002/1521-4095(200108)13:16<1217::AID-ADMA1217>3.0.CO;2-D ↗
47. Theory of microphase separation in block copolymers10.1021/ma60078a047 ↗
48. Redox responsive behavior of thiol/disulfide-functionalized star polymers synthesized via atom transfer radical polymerization10.1021/ma100365n ↗
49. Socrates · 2010
50. Sub-Kelvin thermometry for evaluating the local temperature stability within in situ TEM gas cells10.1016/j.ultramic.2022.113494 ↗
51. Considerations of macromolecular structure in the design of proton conducting polymer membranes: graft versus diblock polyelectrolytes10.1021/ja074765j ↗
52. Hydrogen bond breaking of TPU upon heating: understanding from the viewpoints of molecular movements and enthalpy10.1039/C5RA03984C ↗
53. An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane10.1016/j.msea.2006.03.055 ↗
54. Cross‐linked polyaryl blend membranes for polymer electrolyte fuel cells10.1002/fuce.200400013 ↗
55. Poly(phenylene sulfonic acid)-expanded polytetrafluoroethylene composite membrane for low relative humidity operation in hydrogen fuel cells10.1016/j.jpowsour.2022.231375 ↗
56. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
57. Transport properties and fuel cell performance of sulfonated poly(imide) proton exchange membranes10.1016/j.ijhydene.2011.09.092 ↗
58. Pore-filled proton-exchange membranes with fluorinated moiety for fuel cell application10.3390/en14154433 ↗
59. Fully hydrocarbon membrane electrode assemblies for proton exchange membrane fuel cells and electrolyzers: an engineering perspective10.1002/aenm.202103559 ↗