Segregation-guided alloy design via tailored solidification behavior
Source abstract
Abstract
This study presents an alloy design perspective guided by elemental segregation during solidification to determine the site-specific chemistry and related local thermodynamic properties of dendritic microstructures. This was accomplished via manipulation of the microsegregation behavior by means of nominal alloy composition and thermal conditions of the solidification processes, including modified cooling rates spanning over six orders of magnitudes using ingot casting, directed energy deposition (DED-LB/M) additive manufacturing (AM) and laser powder bed fusion (PBF-LB/M) AM processes. Our approach was demonstrated by computationally designing a novel Al x Co 25 Fe (50-x) Ni 25 multi-principal element alloy (MPEA) as a model system, employing a combination of CALPHAD, Scheil, and multiphase-field simulations, and by experimentally validating the resulting microstructure evolution. The lower Al content (x = 10.5) was designated to generate a supersaturated single-phase fcc matrix suitable for heat-treatments to trigger local phase transformations. The higher Al content (x = 14.5) was selected to define the size and morphology of dual-phase microstructures by controlling phase nucleation and growth through segregation during solidification. Our results showcased how selective enrichment of the desired elements in interdendritic regions can be employed to induce local phase transformations during solidification or post heat-treatments, while their size can be flexibly controlled by the degree of undercooling during solidification. The suggested segregation-guided design approach can be transferred to other alloy systems, enabling effective tuning of local functional, structural, kinetic, and, as shown in this study, thermodynamic properties of dendritic microstructures by predetermining the nature of the alloy matrix through tailored solidification behavior.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Macrosegregation in steel ingots: the applicability of modelling and characterisation techniques10.2355/isijinternational.53.935 ↗
2. Kou · 2003
3. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
4. 1 billion tons of nanostructure – segregation engineering enables confined transformation effects at lattice defects in steels10.1088/1757-899X/219/1/012006 ↗
5. Evolution of microstructural heterogeneities in additively manufactured low-alloy steel
6. New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys10.1016/j.actamat.2023.118736 ↗
7. Robust additive manufacturable Ni superalloys designed by the integrated optimization of local elemental segregation and cracking susceptibility criteria10.1016/j.actamat.2024.119658 ↗
8. Segregation engineering of grain boundaries of a metastable Fe-Mn-Co-Cr-Si high entropy alloy with laser-powder bed fusion additive manufacturing10.1016/j.actamat.2021.117271 ↗
9. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
10. Thermodynamics-guided alloy and process design for additive manufacturing10.1038/s41467-022-31969-y ↗
11. Nano-scale heterogeneity-driven metastability engineering in ferrous medium-entropy alloy induced by additive manufacturing10.1016/j.actamat.2021.117426 ↗
12. Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality10.1016/j.matdes.2018.10.051 ↗
13. Controlling microstructure and mechanical properties of additively manufactured high-strength steels by tailored solidification
14. Toward a better understanding of phase transformations in additive manufacturing of Alloy 71810.1016/j.mtla.2020.100862 ↗
15. Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing10.1016/j.matdes.2023.111847 ↗
16. Compositional heterogeneity in multiphase steels: characterization and influence on local properties10.1016/j.msea.2021.142078 ↗
17. About metastable cellular structure in additively manufactured austenitic stainless steels
18. The effect of the melt-spinning processing parameters on the rate of cooling10.1016/S0921-5093(01)01346-6 ↗
19. Additive manufacturing of alloys with programmable microstructure and properties10.1038/s41467-023-42326-y ↗
20. Understanding the process-microstructure correlations for tailoring the mechanical properties of L-PBF produced austenitic advanced high strength steel
21. Tailoring the nanostructure of laser powder bed fusion additively manufactured maraging steel
22. Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: a pathway to ductile martensite10.1016/j.actamat.2013.06.055 ↗
23. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
24. Combined Al and C alloying enables mechanism-oriented design of multi-principal element alloys: ab initio calculations and experiments10.1016/j.scriptamat.2019.12.004 ↗
25. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
26. Compositionally graded AlxCoCrFeNi high-entropy alloy manufactured by laser powder bed fusion10.1016/j.mtla.2021.101308 ↗
27. Effects of AL addition on microstructure and mechanical properties of Al CoCrFeNi High-entropy alloy10.1016/j.msea.2015.09.034 ↗
28. Outstanding high-temperature strength of novel Fe–Cr–Ni–Al–V ferritic alloys with hierarchical B2–NiAl precipitates10.1016/j.msea.2022.142999 ↗
29. A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range10.1126/sciadv.abi4404 ↗
30. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
31. Temperature-affected microstructural stability of coherent cuboidal B2 particles in precipitation-strengthened body-centered-cubic Al0.7CoCr2FeNi high-entropy alloy10.1007/s10853-019-03459-y ↗
32. Enhancing high temperature mechanical properties via modulating B2 phase with Al contents in FeCrNiAlx(x = 0.63,0.71,0.77) high entropy alloys10.1016/j.jallcom.2022.163883 ↗
33. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
34. Thermodynamic database for multi-principal element alloys within the system Al–Co–Cr–Fe–Mn–Ni–C10.1016/j.calphad.2023.102644 ↗
35. Multi-ternary extrapolation scheme for efficient coupling of thermodynamic data to a multi-phase-field model10.1016/j.commatsci.2015.03.003 ↗
36. Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application10.1103/PhysRevE.73.066122 ↗
37. Laser powder bed fusion of eutectic Al–Ni alloys: experimental and phase-field studies10.1016/j.matdes.2020.109299 ↗
38. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
39. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
40. Phase-field simulation of the formation of new grains by fragmentation during melting of an ABD900 superalloy10.1088/1757-899X/1281/1/012008 ↗
41. Implementation of an antitrapping current for a multicomponent multiphase-field ansatz10.1016/j.jcrysgro.2013.05.032 ↗
42. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
43. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
44. Grain detection from 2d and 3d EBSD data--specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
45. Orientations – perfectly colored10.1107/S1600576716012942 ↗
46. In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel10.1016/j.jnucmat.2019.01.034 ↗
47. Kurz · 1998
48. Solidification microstructures: a conceptual approach10.1016/0956-7151(94)90044-2 ↗
49. Solute trapping in rapid solidification of a binary dilute system: a phase-field study10.1103/PhysRevE.84.041143 ↗
50. On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys10.1088/1361-651X/aa7369 ↗
51. Modeling of hierarchical solidification microstructures in metal additive manufacturing: challenges and opportunities
52. The origin of high-density dislocations in additively manufactured metals10.1080/21663831.2020.1751739 ↗
53. Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting10.1016/j.actamat.2020.09.015 ↗
54. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
55. Formation of strain-induced martensite in selective laser melting austenitic stainless steel10.1016/j.msea.2018.10.121 ↗
56. Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering10.1016/j.matdes.2021.110246 ↗
57. Computational assessment of thermokinetics and associated microstructural evolution in laser powder bed fusion manufacturing of Ti6Al4V alloy10.1038/s41598-020-63281-4 ↗
58. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
59. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
60. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
61. Metastable cellular structures govern localized corrosion damage development in additive manufactured stainless steel10.1038/s41529-024-00464-8 ↗
62. Discovering the nanoscale origins of localized corrosion in additive manufactured stainless steel 316L by liquid cell transmission electron microscopy10.1016/j.corsci.2022.110659 ↗
63. Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: a comparative study bringing insights into the impact of microstructure on their passivity10.1016/j.corsci.2020.108914 ↗
64. Recent research progress in hydrogen embrittlement of additively manufactured metals – a review10.1016/j.cossms.2023.101106 ↗
65. High-speed direct energy deposition as a high-throughput design tool for laser-based additive manufacturing10.1016/j.addlet.2023.100188 ↗