journal article·2014-09Open access

Preparation and mechanism of TiO2-coated illite composite pigments

Xiaoxian Zhao, Jie Li, Yahui Liu, Yongqiang Zhang, Jingkui Qu, Tao Qi

Dyes and Pigments· Volume 108

Abstract

TiO2-coated illite composite pigments were prepared by hydrolyzing Ti(SO4)(2) on the surface of illite substrates and the products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), zeta potential analysis, and X-ray photoelectron spectroscopy (XPS), respectively. Density functional theory calculations of the energetic stability and electronic structure of illite, calcined illite, and TiO2-coated illite were used to analyze the chemical activity and bonding position between the anatase film and the illite particles. The results demonstrate that calcined illite is more suitable for metatitanic acid coating. Moreover, the surface of illite substrates is continuously coated with anatase and a chemical interaction could occur between the anatase film and the illite substrates. The whiteness, hiding power, and oil absorption value of the compound pigment are 95.73%, 97.55%, and 33.82 g/100 g, respectively. (C) 2014 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · Cultural Heritage Materials Analysis · Dyeing and Modifying Textile Fibers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Growth of TiO2 coating on wood surface using controlled hydrothermal method at low temperatures10.1016/j.apsusc.2010.03.053 ↗
2. Silver-loaded TiO2 powders prepared through mechanical ball milling10.1016/j.ceramint.2013.02.054 ↗
3. Mechanical properties of plasma sprayed nanostructured TiO2 coatings on mild steel
4. Metakaolinite/TiO2 composite: photoactive admixture for building materials based on Portland cement binder10.1016/j.conbuildmat.2012.02.086 ↗
5. Preparation of ZrO2/Gd2O3 composite ceramic materials by coprecipitation method10.1016/j.ceramint.2013.08.050 ↗
6. Self-cleaning and antireflection properties of titanium oxide film by liquid phase deposition10.1016/j.surfcoat.2012.04.078 ↗
7. Textured zinc oxide prepared by liquid phase deposition (LPD) method and its application in improvement of extraction efficiency for 650 nm resonant cavity light-emitting diode (RCLED)10.1016/j.jallcom.2011.03.039 ↗
8. Evaluating mechanical adhesion of sol-gel titanium dioxide coatings containing calcium phosphate for metal implant application10.1016/S0142-9612(00)00160-5 ↗
9. Preparation of calcium carbonate particles coated with titanium dioxide10.1016/S1674-4799(09)60102-3 ↗
10. Preparation and characterization of photoactive composite kaolinite/TiO210.1016/j.jhazmat.2011.01.106 ↗
11. Preparation of nanosized anatase TiO2-coated kaolin composites and their pigmentary properties10.1016/j.powtec.2009.07.006 ↗
12. Formation of a thin TiO2 layer on the surfaces of silica and kaolin pigments through atomic layer deposition10.1016/S0927-7757(02)00390-4 ↗
13. The effect of iron ions on the anatase-rutile phase transformation of titania (TiO2) in mica-titania pigments10.1016/j.dyepig.2012.03.030 ↗
14. Bulk and surface properties of commercial kaolins10.1016/j.clay.2010.02.002 ↗
15. Preparation of titanium dioxide compound pigments based on kaolin substrates10.1007/s11998-009-9172-6 ↗
16. The effect of calcinations on the surface composition and structure of titanium dioxide coated mica particles10.1006/jssc.1993.1088 ↗
17. Low temperature synthesis and characterization of rutile TiO2-coated mica-titania pigments10.1016/j.dyepig.2012.06.006 ↗
18. Hagemeyer · 1984
19. Illite polytype distribution as an inorganic indicator of thermal maturity in the smackover formation of the Manila Embayment, Southwest Alabama
20. Modification of a montmorillonite-illite clay using alkaline hydrothermal treatment and its application for the removal of aqueous Cs+ ions10.1016/j.jcis.2005.12.008 ↗
21. Brigatti · 2013
22. Thermal stability and pozzolanic activity of calcined illite10.1016/0169-1317(94)00033-M ↗
23. Synthesis of zeolites from the low-grade Tunisian natural illite by two different methods10.1016/j.clay.2011.02.017 ↗
24. A periodic DFT study of water and ammonia adsorption on anatase TiO2 (001) slab10.1016/j.susc.2010.03.016 ↗
25. The DFT study of adsorption of 2, 4-dinitrotoluene on kaolinite surfaces10.1016/j.comptc.2013.09.025 ↗
26. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
27. General structure analysis system (GSAS)
28. First-principles computation of material properties: the ABINIT software project10.1016/S0927-0256(02)00325-7 ↗
29. Ab initio pseudopotentials for electronic structure calculations of poly-atomic systems using density-functional theory10.1016/S0010-4655(98)00201-X ↗
30. Separable dual-space Gaussian pseudopotentials10.1103/PhysRevB.54.1703 ↗
31. Influence and hydrolysis kinetics in titanyl sulfate solution from the sodium hydroxide molten salt method10.1016/j.jcrysgro.2013.07.023 ↗
32. Surface characteristics of hydrous silica-coated TiO2 particles10.1016/S0032-5910(01)00470-3 ↗
33. Experimental and theoretical investigation of the pH effect on the titania phase transformation during the sol-gel process10.1016/j.jcrysgro.2007.07.053 ↗
34. Topological analysis of real space properties for the solid-state full-potential APW DFT method10.1016/j.jpcs.2010.06.005 ↗
35. Molecular and reactive adsorption of dimethyl methylphosphonate over (001) and (100) anatase clusters10.1016/j.comptc.2013.07.031 ↗
36. Effect of polycrystalline structure of TiO2 particles on the light scattering efficiency10.1016/j.jcis.2007.09.037 ↗