Chemical mechanism of formation of two-dimensional electron gas at the Al2O3/TiO2 interface by atomic layer deposition
Source abstract
Abstract
Two-dimensional electron gases (2DEGs) localized at oxide heterointerfaces can potentially be used in applications associated with the design of novel electronic device architectures. Recent studies have reported that atomic layer deposition (ALD) of Al2O3 on TiO2 substrates can generate 2DEG states, owing to in situ formation of interfacial oxygen vacancies (VO). However, the chemical mechanism governing the adsorption of the trimethylaluminum (TMA) precursor on the TiO2 surface remains unclear. In this work, an investigation aimed at elucidating the formation of the 2DEG state through the reaction of TMA on TiO2 was performed using periodic dispersion-corrected DFT + U calculations. Dimethylether, whose desorption leaves VO surrounded by Ti3+, can be formed via direct methylation of the lattice oxygen on the TiO2 surface. The experimentally observed dependence of the carrier density on the process temperature of Al2O3 ALD confirmed the endothermic nature of VO formation. Furthermore, the emergence of geometrically confined n-type electronic states corresponding to interfacial VO confirmed the formation of 2DEGs at the heterointerface. Our study provides a fundamental understanding of 2DEG formation in the Al2O3/TiO2 heterojunction interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Semiconductor materials and devices · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Emerging GaN technologies for power, RF, digital, and quantum computing applications: recent advances and prospects10.1063/5.0061555 ↗
2. Oxide interfaces—an opportunity for electronics10.1126/science.1181862 ↗
3. Conductive oxide interfaces for field effect devices10.1002/admi.201900480 ↗
4. Recent advances on spin-polarized two-dimensional electron gases at oxide interfaces10.1021/acsaelm.0c00860 ↗
5. A high-mobility electron gas at the LaAlO3/SrTiO3 heterointerface10.1038/nature02308 ↗
6. Field-effect device using quasi-two-dimensional electron gas in mass-producible atomic-layer-deposited Al2O3/TiO2 ultrathin (<10 nm) film heterostructures10.1021/acsnano.8b05891 ↗
7. Highly uniform resistive switching performances using two-dimensional electron gas at a thin-film heterostructure for conductive bridge random access memory10.1021/acsami.9b08941 ↗
8. High-performance, transparent thin film hydrogen gas sensor using 2D electron gas at interface of oxide thin film heterostructure grown by atomic layer deposition10.1002/adfm.201807760 ↗
9. 2D electron gas at the interface of atomic-layer-deposited Al2O3/TiO2 on SrTiO3 single crystal substrate10.1002/aelm.201800527 ↗
10. A brief review of atomic layer deposition: from fundamentals to applications10.1016/j.mattod.2014.04.026 ↗
11. Nanolaminated Al2O3–TiO2 thin films grown by atomic layer deposition10.1016/j.jcrysgro.2004.10.007 ↗
12. Al2O3-TiO2 nanolaminates for conductive silicon surface passivation10.1109/JPHOTOV.2015.2494695 ↗
13. Laminated structure of Al2O3 and TiO2 for enhancing performance of reverse electrowetting-on-dielectric energy harvesting10.1007/s40684-019-00145-x ↗
14. Creation and control of two-dimensional electron gas using Al-based amorphous oxides/SrTiO3 heterostructures grown by atomic layer deposition10.1021/nl302214x ↗
15. Creation of a short-range ordered two-dimensional electron gas channel in Al2O3/in2O3 interfaces10.1021/acsnano.7b01964 ↗
16. Creation of a two-dimensional conducting path based on the engineering oxidation state of WO3 with Al2O3 at the interface10.1016/j.apsusc.2019.03.203 ↗
17. Characterization of a 2D electron gas at the interface of atomic-layer deposited Al2O3/ZnO thin films for a field-effect transistor
18. Scaling reducibility of metal oxides10.1007/s00214-017-2130-y ↗
19. Substrate reactivity effects in the atomic layer deposition of aluminum oxide from trimethylaluminum on ruthenium10.1021/cm200276z ↗
20. Interfacial chemistry in Al/CuO reactive nanomaterial and its role in exothermic reaction10.1021/am3019405 ↗
21. Trimethylaluminum and oxygen atomic layer deposition on hydroxyl-free Cu(111)10.1021/acsami.5b03598 ↗
22. Substrate reactivity as the origin of Fermi level pinning at the Cu2O/ALD-Al2O3 interface10.1088/2053-1591/3/4/046404 ↗
23. Elucidating the redox behavior during atomic layer deposition on lithium-ion battery cathode materials10.1021/acs.chemmater.1c02632 ↗
24. Atomic layer deposition of high-k dielectrics on III–V semiconductor surfaces10.1016/j.pcrysgrow.2016.11.001 ↗
25. Surface chemistry of atomic layer deposition: a case study for the trimethylaluminum/water process10.1063/1.1940727 ↗
26. Simulating the atomic layer deposition of alumina from first principles10.1039/b405776g ↗
27. Ab initio investigation of surface chemistry of alumina ALD on hydroxylated γ-alumina surface10.1021/acs.jpcc.5b02382 ↗
28. DFT investigation into alumina ALD growth inhibition on hydroxylated amorphous silica surface10.1021/acs.jpcc.5b05261 ↗
29. Understanding chemical and physical mechanisms in atomic layer deposition
30. Role of surface orientation on atomic layer deposited Al2O3/GaAs interface structure and Fermi level pinning: a density functional theory study10.1063/1.3624897 ↗
31. First-Principles modeling of the “clean-up” of native oxides during atomic layer deposition onto III–V substrates10.1021/jp206566y ↗
32. Decomposition of metal alkylamides, alkyls, and halides at reducible oxide surfaces: mechanism of ‘clean-up’ during atomic layer deposition of dielectrics onto III–V substrates10.1021/cm403336c ↗
33. In situ XPS analysis of the atomic layer deposition of aluminium oxide on titanium dioxide10.1039/C8CP06912C ↗
34. In situ observation of two-dimensional electron gas creation at the interface of an atomic layer-deposited Al2O3/TiO2 thin-film heterostructure10.1021/acs.chemmater.0c01572 ↗
35. Interface carriers and enhanced electron-phonon coupling effect in Al2O3/TiO2 heterostructure revealed by resonant inelastic soft X-ray scattering10.1002/adfm.202104430 ↗
36. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
37. Oxygen vacancy origin of the surface band-gap state of TiO210.1103/PhysRevLett.104.036806 ↗
38. Engineering two-dimensional electron gases at the (001) and (101) surfaces of TiO2 anatase using light10.1103/PhysRevB.92.041106 ↗
39. Distinct behavior of localized and delocalized carriers in anatase TiO2 (001) during reaction with O210.1103/PhysRevMaterials.4.025801 ↗
40. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
41. Surface chemistry of TiO2 connecting thermal catalysis and photocatalysis10.1039/C9CP07001J ↗
42. Modeling mechanism and growth reactions for new nanofabrication processes by atomic layer deposition10.1002/adma.201504043 ↗
43. Evaluation of silicon tetrahalide precursors for low-temperature thermal atomic layer deposition of silicon nitride10.1016/j.apsusc.2021.150603 ↗
44. Monte Carlo and kinetic Monte Carlo models for deposition processes: a review of recent works10.3389/fphy.2021.631918 ↗
45. Atomic layer modulation of multicomponent thin films through combination of experimental and theoretical approaches10.1021/acs.chemmater.1c00508 ↗
46. Study of a vanadium precursor for VO2 thin-film growth in the atomic layer deposition process by multiscale simulations10.1021/acs.jpcc.6b06347 ↗
47. Modeling alumina atomic layer deposition reaction kinetics during the trimethylaluminum exposure10.1007/s00214-013-1414-0 ↗
48. AxBAx pulsed atomic layer deposition: numerical growth model and experiments10.1063/1.4942439 ↗
49. Edge-selective growth of MCp2 (M = Fe, Co, and Ni) precursors on Pt nanoparticles in atomic layer deposition: a combined theoretical and experimental study10.1021/acs.chemmater.8b03168 ↗
50. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
51. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
52. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
53. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
54. The surface reactivity and structural properties of anatase TiO2 (001), (100), (101) and (105) surface researched with DFT
55. Mixed dissociative and molecular water adsorption on anatase TiO2(101)10.1021/jp111335w ↗
56. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
57. DFT+U calculations of crystal lattice, electronic structure, and phase stability under pressure of TiO2 polymorphs
58. Comparison of standard DFT and Hubbard-DFT methods in structural and electronic properties of TiO2 polymorphs and H-titanate ultrathin sheets for DSSC application10.1016/j.apsusc.2017.09.141 ↗
59. Choice of U for DFT+U calculations for titanium oxides10.1021/jp111350u ↗
60. Structural-electronic relationships in inorganic solids: powder neutron diffraction studies of the rutile and anatase polymorphs of titanium dioxide at 15 and 295 K10.1021/ja00246a021 ↗
61. Electrochemical and photoelectrochemical investigation of single-crystal anatase10.1021/ja954172l ↗
62. Effect of hydration of the TiO2 anatase (101) substrate on the atomic layer deposition of alumina films10.1039/c0jm04095a ↗
63. In situ mass spectrometry study on surface reactions in atomic layer deposition of TiN and Ti(Al)N thin films10.1021/cm011150r ↗
64. Surface structure of (1×2) reconstructed TiO2(110) studied using electron stimulated desorption ion angular distribution10.1103/PhysRevLett.77.3851 ↗
65. Calculation of TiO2 surface and subsurface oxygen vacancy by the screened exchange functional10.1021/acs.jpcc.5b02430 ↗
66. Fluorination of Si(001)-2×1 surface near step edges: a mechanism for surface defect induced etching10.1116/1.581633 ↗
67. Molecular mechanism of thermal dry etching of iron in a two-step atomic layer etching process: chlorination followed by exposure to acetylacetone10.1021/acs.jpcc.0c10556 ↗
68. Intrinsic n-type defect formation in TiO2: a comparison of rutile and anatase from GGA+U calculations10.1021/jp9088047 ↗