High-entropy alloys as magnetic shielding materials in low-frequency wireless power transmission
Source abstract
Abstract
Soft magnetic materials are required to exhibit high saturation magnetization and low coercivity. Iron-based metal alloys, such as FeMnZn, are commonly used commercial soft magnetic materials with electromagnetic shielding functions. However, these alloys generally exhibit low saturation magnetization, poor high-temperature stability, and significant magnetic losses. In recent years, many research groups have highlighted the excellent soft magnetic properties of high-entropy alloys (HEAs). This study develops new HEA powders with superior soft magnetic characteristics for applications in low-frequency magnetic shielding components. The research found that the FeCoNiSiCuNb HEA, under appropriate ball-milling and annealing conditions, exhibits high saturation magnetization and excellent high-temperature properties, retaining over 50 % of its magnetism even at 700K. At an operating frequency of 100 kHz, compared to FeMnZn, the real permeability of the FeCoNiSiCuNb HEA is increased by 2.25 times. Preparing this HEA material as a magnetic shielding material can lead to higher inductance, a coupling coefficient increased to 0.84, and a transmission efficiency improvement of 19 %, demonstrating the potential of high-entropy alloys in wireless charging applications. • The first study demonstrating high-entropy alloys as magnetic shielding materials in wireless charging devices. • HEA soft magnetic materials for low-frequency magnetic shielding using dry ball milling, wet ball milling, and annealing. • FeCoNiSiCuNb HEA maintains 22.8 emu/g saturation magnetization at 1,000K, showing excellent high-temperature stability. • Ansys Maxwell simulations show HEA shielding with a 0.84 coupling coefficient and a 19% boost in transmission efficiency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Heusler alloys: electronic and magnetic properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Microstructure design of high-entropy alloys through a multistage mechanical alloying strategy for temperature-stable megahertz electromagnetic absorption10.1007/s40820-022-00886-6 ↗
2. Microstructure evolution and strengthening mechanism of FeCo-1.5V0.5Nb0.4 W soft magnetic alloy rolled strip with high yield strength and low coercivity10.1016/j.actamat.2024.119793 ↗
3. Modeling and application of magnetic shaking for improving permeability and performance of magnetic shields10.1109/TIE.2023.3314921 ↗
4. A novel soft-magnetic B2-based multiprincipal-element alloy with a uniform distribution of coherent body-centered-cubic nanoprecipitates10.1002/adma.202006723 ↗
5. A popcorn-inspired strategy for compounding graphene@NiFe2O4 flexible films for strong electromagnetic interference shielding and absorption10.1038/s41467-024-49498-1 ↗
6. FeCoNiCr0.4CuX high-entropy alloys with strong intergranular magnetic coupling for stable megahertz electromagnetic absorption in a wide temperature spectrum10.1021/acsami.1c22670 ↗
7. Microwave absorption, reflection and EMI shielding of PU–PANI composite10.1016/j.actamat.2008.09.018 ↗
8. Recent progress on multifunctional electromagnetic interference shielding polymer composites10.1016/j.jmst.2022.06.031 ↗
9. High easy-plane anisotropy Y-Co intermetallic nanoparticles for boosting gigahertz magnetic loss ability10.1016/j.actamat.2024.119947 ↗
10. Effective combination of soft magnetic materials for magnetic shielding10.1109/TMAG.2012.2196682 ↗
11. Review of Fe-6.5 wt%Si high silicon steel—a promising soft magnetic material for sub-kHz application10.1016/j.jmmm.2019.02.089 ↗
12. New soft magnetic materials (Y1−xSmx)2Fe14B with tunable magnetic anisotropy10.1016/j.actamat.2024.120090 ↗
13. A low-cost magnetic shield consisting of nonoriented silicon steel10.1109/TMAG.2005.855195 ↗
14. Single-source-precursor derived RGO/CNTs-SiCN ceramic nanocomposite with ultra-high electromagnetic shielding effectiveness10.1016/j.actamat.2017.03.031 ↗
15. Absorption-dominant mmWave EMI shielding films with ultralow reflection using ferromagnetic resonance frequency tunable M-type ferrites10.1007/s40820-023-01058-w ↗
16. Graphene-wrapped multiloculated nickel ferrite: a highly efficient electromagnetic attenuation material for microwave absorbing and green shielding10.1007/s12274-022-4428-x ↗
17. Electromagnetic wave absorption performance of FeCoNiMn0.5Al0.2 high entropy alloys governed by nanocrystal evolution10.1016/j.mtnano.2022.100243 ↗
18. Study on the influence of the degree of the easy-plane orientation on the high-frequency magnetic properties and power loss of SMC in the MHz band10.1016/j.actamat.2024.120041 ↗
19. The electromagnetic response of composition-regulated honeycomb structural materials used for broadband microwave absorption10.1016/j.jmst.2021.01.072 ↗
20. High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications10.1016/j.actamat.2019.01.035 ↗
21. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
22. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
23. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
24. Strength, plasticity and coercivity tradeoff in soft magnetic high-entropy alloys by multiple coherent interfaces10.1016/j.actamat.2023.118970 ↗
25. Strength can be controlled by edge dislocations in refractory high-entropy alloys10.1038/s41467-021-25807-w ↗
26. Intrinsic factors responsible for brittle versus ductile nature of refractory high-entropy alloys10.1038/s41467-024-45639-8 ↗
27. Magnetically-driven phase transformation strengthening in high entropy alloys10.1038/s41467-018-03846-0 ↗
28. Role of heterophase interfaces on local coercivity mechanisms in the magnetic Al0.3CoFeNi complex concentrated alloy10.1016/j.actamat.2023.118672 ↗
29. Effects of phase composition and elemental partitioning on soft magnetic properties of AlFeCoCrMn high entropy alloys10.1016/j.actamat.2019.04.007 ↗
30. Low-frequency conductivity of low wear high-entropy alloys10.1038/s41467-024-49035-0 ↗
31. Design of high-entropy films as ultra-violet light reflector
32. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
33. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
34. One-dimensional magnetic FeCoNi alloy toward low-frequency electromagnetic wave absorption10.1007/s40820-022-00920-7 ↗
35. Synthesis of FeCoNiCuZn single-phase high-entropy alloy by high-frequency electromagnetic-field assisted ball milling10.1016/j.jmmm.2019.166151 ↗
36. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
37. The use of high-entropy alloys in additive manufacturing10.1016/j.scriptamat.2014.11.037 ↗
38. Wear, erosion and corrosion behavior of laser cladded high entropy alloy coatings–A review
39. Effect of Nb addition on microstructure and thermal and mechanical properties of Fe-Co-Ni-Cu-Cr multiprincipal-element (high-entropy) alloys in as-cast and heat-treated state10.1007/s11837-019-03644-z ↗
40. Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding10.1016/j.matdes.2010.12.001 ↗
41. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution10.1016/j.matchemphys.2005.01.001 ↗
42. Function of Si on the high-temperature oxidation of FeCoNiMnSix HEAs with excellent electromagnetic-wave absorption properties10.1016/j.jallcom.2023.169853 ↗
43. Accelerated and conventional development of magnetic high entropy alloys10.1016/j.mattod.2021.03.018 ↗
44. Highly tunable magnetic and mechanical properties in an Al0.3CoFeNi complex concentrated alloy10.1016/j.mtla.2020.100755 ↗
45. Optimizing the electromagnetic properties of the FeCoNiAlCrx high entropy alloy powders by composition adjustment and annealing treatment10.1016/j.jmmm.2019.165947 ↗
46. Microstructure design of high-entropy alloys through a multistage mechanical alloying strategy for temperature-stable megahertz electromagnetic absorption10.1007/s40820-022-00886-6 ↗
47. Electromagnetic wave absorption properties of mechanically alloyed FeCoNiCrAl high entropy alloy powders10.1016/j.apt.2016.03.023 ↗
48. Electromagnetic interference shielding effectiveness of high entropy AlCoCrFeNi alloy powder laden composites10.1016/j.jallcom.2017.11.044 ↗
49. FeCoNiSixAl0.4 high entropy alloy powders with dual-phase microstructure: improving microwave absorbing properties via controlling phase transition10.1016/j.jallcom.2019.03.152 ↗
50. Structural and impedance spectroscopy characterization of soft magnetic materials10.1016/j.jmmm.2018.11.085 ↗
51. Importance of surface roughness on the magnetic properties of additively manufactured FeSi thin walls10.1016/j.actamat.2023.119501 ↗
52. Soft magnetic materials for power inductors: state of art and future development10.1016/j.mtelec.2023.100066 ↗
53. Soft magnetism enhancement and eddy current suppression in bioinspired Iron‐based nanocrystalline soft magnetic composites with nacre‐like structure10.1016/j.jmst.2024.04.002 ↗
54. Application-Oriented characterization and analysis of core materials under medium-frequency condition10.1109/TPEL.2023.3288929 ↗
55. Magnetic analysis of permeability configurable nanocrystalline flake ribbons for medium frequency energy conversion applications10.1016/j.mtsust.2024.100795 ↗
56. Soft magnetic materials in high-frequency, high-power conversion applications10.1007/s11837-012-0350-0 ↗
57. Nanocrystalline powder cores for high-power high-frequency power electronics applications
58. Material efficiency in magnetic shielding at low and intermediate frequency10.1109/TMAG.2003.816235 ↗
59. Characteristic analysis of electromagnetic force in a high-power wireless power transfer system10.3390/en11113088 ↗
60. Regulating the recrystallized grain to induce strong cube texture in oriented silicon steel10.1016/j.jmst.2021.03.081 ↗
61. Application of an improved multi-conductor transmission line model in power transformer10.1109/TMAG.2013.2245874 ↗
62. Functional definition and classification of the power transformer10.1109/TPWRD.2022.3180625 ↗
63. Robust ferrite-less double D topology for roadway IPT applications10.1109/TPEL.2018.2883129 ↗
64. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
65. High-entropy alloys with high saturation magnetization, electrical resistivity and malleability10.1038/srep01455 ↗
66. Magnetic and mechanical properties of additively manufactured Alx(CoFeNi) complex concentrated alloys10.1016/j.scriptamat.2022.115149 ↗
67. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
68. Jiles · 2015
69. Enhancement of magnetic properties in FeCoNiCr0.4CuX high entropy alloys through the cocktail effect for megahertz electromagnetic wave absorption10.1016/j.jallcom.2021.159602 ↗
70. Microwave absorption performance of FeCoNiAlCr0.9 alloy powders by adjusting the amount of process control agent10.1016/j.jmst.2020.09.049 ↗
71. Design and simulation of wireless power transfer system for electric vehicle application
72. Design of Energy-Efficient Induction motor using ANSYS software10.1016/j.rineng.2022.100616 ↗
73. Modelling, simulation and hardware analysis of misalignment and compensation topologies of wireless power transfer for electric vehicle charging application10.1016/j.segan.2024.101285 ↗
74. Design methodology and circuit analysis of wireless power transfer systems applied to electric vehicles wireless chargers10.3390/wevj14050117 ↗
75. An efficient design of LC-compensated hybrid wireless power transfer system for electric vehicle charging applications10.1016/j.aej.2021.12.016 ↗
76. Design and analysis of a wireless power transfer system with alignment errors for electrical vehicle applications10.1016/j.ijhydene.2017.03.160 ↗
77. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
78. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
79. Effects on the thermo-mechanical and crystallinity properties of nylon 6,6 electrospun fibres reinforced with one dimensional (1D) and two dimensional (2D) carbon10.3390/ma6083494 ↗
80. Matsushita · 2014 · 123
81. Limitations of Ansys-Maxwell and Simplorer Magnetostatic co-simulation in Inductive Wireless Power Transfer10.1109/WPW54272.2022.9901359 ↗