Treatment of acid rose dye containing wastewater by ozonizing – biological aerated filter
Source abstract
Abstract
Abstract The ozonizing – biological aerated filter process was used to treat the acid rose dye containing wastewater. The most suitable conditions were identified as follows: the mass ratio of ozone to dye = 4.5, temperature t = 18–25 °C, HRT = 3 h and gas/liquid = 4:1. Experimental results showed that ozonizing process had an excellent de-color efficiency and could improve the biodegradability of wastewater. With ozonizing the BOD/COD ratio increased from 0.18 to 0.36, and as a result, the subsequent biological aerated filter could be more effective for further reducing COD and SS concentrations, especially for wastewater with low concentration of SS and COD. After treatment the effluent COD was less than 40 mg/L, SS about 50 mg/L and color less than 20°. It can meet the water quality standards of the treated water reused for industry cooling water.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Water Quality Monitoring and Analysis · Advanced oxidation water treatment · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Study on the biodegradability of dye and treatment of dye containing wastewater in anaerobic condition
2. The effect of volatile Trihalohydrocarbon on dye containing wastewater by chloros
3. Chemical–biological treatment of pyrene10.1016/S0043-1354(99)00270-5 ↗
4. Fenton oxidation with ethanol to degrade anthracene into biodegradable 9,10-anthraquinon: a pretreatment method for anthracene-contaminated soil10.1016/S0273-1223(98)00611-8 ↗
5. Xu · 2003
6. Test Guideline 302 B, Decision of the Council C(81) 30 final. Paris: OECD; 1981.
7. Photochemical enhanced microbial degradation of environmental pollutants10.1021/es00019a016 ↗