Tailoring microstructure using pulsed electromagnetic field-assisted directed energy deposition
Source abstract
Abstract
Despite the advancements in laser directed energy deposition, challenges such as micro-segregation, formation of hard and brittle phases, and poor controllability over solidification microstructures persist due to the rapid melting-solidification transience, complexity of multi-physics metallurgical processes, and instability of multiple processing parameters. These issues impair the performance of deposited layers and hinder further development and broad application of the technology. Recently, electromagnetic field-assisted solidification has emerged as a promising method to tailor solidification structures and suppress defects. In this study, a novel pulsed electromagnetic field (PEMF) assisted laser directed energy deposition was investigated to tailor the microstructure of IN718 superalloy. Comprehensive analysis revealed that PEMF treatment significantly refined grain structures, reducing average grain size by 60.3% from 310 μm to 123 μm through enhanced columnar-to-equiaxed transition. Simultaneously, chain-like Laves phase was transformed into fine granular particles with reduced volume fraction under optimal parameters. The mechanical properties of the deposits were synergistically enhanced at room temperature, with yield strength and ultimate tensile strength increasing by 21.1% and 17.3%, respectively, due to combined strengthening from grain refinement, solid solution effects, and elevated dislocation density. High-temperature tensile tests also confirmed a significant improvement in strength. The high-fidelity simulation results indicate that PEMF application effectively reduced thermal gradients from 3.5 × 10 5 to 2.1 × 10 5 K/m while amplifying solidification rate fluctuations, thereby promoting equiaxed grain nucleation via enhanced constitutional undercooling. These microstructural alternations is achieved by the PEMF assisted laser directed energy deposition as a transformative approach for the IN718 superalloy additive manufacturing. • A novel PEMF-assisted L-DED technique achieved 60.3% grain refinement and transformed chain-like Laves phase into fine granular particles. • The treated specimens showed 21.1% and 17.3% increases in yield and ultimate tensile strength, respectively, due to combined strengthening. • The PEMF promoted equiaxed grain refinement by reducing thermal gradient and amplifying solidification rate fluctuations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Additive manufacturing of ceramics opens the door to components for biomanufacturing applications with high functionality10.1016/j.procir.2024.08.048 ↗
2. A systematic review of design for additive manufacturing of aerospace lattice structures: current trends and future directions10.1016/j.paerosci.2024.101021 ↗
3. Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects
4. Additive manufacturing of Stellite 6 alloy by laser-directed energy deposition: engineering the crystallographic texture10.1016/j.matchar.2023.113511 ↗
5. Study on the microstructure evolution performance improvement of Invar alloy repaired by laser cladding Aermet100 ultra-high strength steel10.1016/j.jmatprotec.2024.118517 ↗
6. Additive manufacturing of bulk metallic glass: principles, materials and prospects
7. Additive manufacturing of nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship10.1016/j.pmatsci.2023.101108 ↗
8. A state-of-the-art review on fatigue performance of powder bed fusion-built alloy 71810.1016/j.pmatsci.2022.101066 ↗
9. New insights on the origin of grain refinement in 316L additively manufactured alloys10.1016/j.scriptamat.2024.116174 ↗
10. Grain refinement in additively manufactured ferritic stainless steel by in situ inoculation using pre-alloyed powder10.1016/j.scriptamat.2020.113690 ↗
11. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
12. Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance10.1016/j.compositesb.2018.12.146 ↗
13. Microstructure and mechanical properties of the TiN particles reinforced IN718C composite10.1016/j.jallcom.2018.05.096 ↗
14. Segregation-guided alloy design via tailored solidification behavior
15. Microstructure and mechanical properties of Al2O3 dispersion strengthened Cu by laser in-situ aluminum thermal reduction processing10.1016/j.matdes.2025.114547 ↗
16. Review on field assisted metal additive manufacturing10.1016/j.ijmachtools.2023.104032 ↗
17. Effect of electromagnetic field on element segregation and texture via laser cladding of Inconel 71810.1016/j.jmrt.2023.10.176 ↗
18. Grain structure and texture control of additive manufactured nickel-based superalloy using quasi-continuous-wave laser directed energy deposition
19. Controlling grain nucleation and morphology by laser beam shaping in metal additive manufacturing10.1016/j.matdes.2020.109071 ↗
20. Effect of scanning strategy on texture formation in Ni-25 at.%Mo alloys fabricated by selective laser melting10.1016/j.matdes.2017.11.060 ↗
21. Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations10.1016/j.ijmachtools.2023.104031 ↗
22. Grain refinement of stainless steel in ultrasound-assisted additive manufacturing
23. Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion10.1016/j.ijmachtools.2022.103965 ↗
24. Grain refinement and Laves phase dispersion by high-intensity ultrasonic vibration in laser cladding of Inconel 71810.1016/j.jmrt.2024.05.229 ↗
25. lippold · 2014 · 15
26. Laser powder bed fusion of GH4099 Ni-based superalloy under a static magnetic field with tailored microstructure and enhanced mechanical performance10.1080/17452759.2024.2411023 ↗
27. The evolution of element distribution during laser cladding under static magnetic field10.1007/s11661-021-06540-x ↗
28. Magnetic modulation of keyhole instability during laser welding and additive manufacturing10.1126/science.ado8554 ↗
29. Influence of static magnetic field on the microstructure of nickel-based superalloy by laser-directed energy deposition10.1007/s11661-020-05783-4 ↗
30. Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring10.1016/j.optlastec.2017.09.022 ↗
31. Research and development status of in situ field assisted laser additive manufacturing: a review10.1016/j.optlastec.2024.111700 ↗
32. Particle distribution and microstructure of IN718/WC composite coating fabricated by electromagnetic compound field-assisted laser cladding10.1016/j.apsusc.2021.149078 ↗
33. Study on the structural evolution of Al–15Sn–1Cu alloys solidified at different electromagnetic vibration frequencies10.1016/j.jmatprotec.2025.118771 ↗
34. Effect of electromagnetic vibration frequency and temperature gradient10.2320/matertrans.48.538 ↗
35. Effect of the simultaneous application of a high static magnetic field and a low alternating current on grain structure and grain boundary of pure aluminum10.1016/j.jmst.2018.04.013 ↗
36. Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
37. Numerical simulation of microstructure evolution during laser directed energy deposition for Inconel 718 using cellular automaton method coupled with Eulerian multiphase10.1016/j.ijheatmasstransfer.2023.124554 ↗
38. Modelling and simulation of solute segregation and eutectic phase precipitation during laser directed energy deposition of precipitation-strengthened Ni-based superalloys10.1016/j.jmatprotec.2026.119251 ↗
39. Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing10.1038/s41467-023-43563-x ↗
40. Solidification in metal additive manufacturing: challenges, solutions, and opportunities10.1016/j.pmatsci.2024.101361 ↗
41. Dendritic growth into undercooled alloy melts10.1016/0025-5416(84)90199-X ↗
42. Simulations of microstructure coupling with moving molten pool by selective laser melting using a cellular automaton10.1016/j.matdes.2019.108230 ↗
43. Mills · 2002
44. Multicomponent multiphase modeling of dissimilar laser cladding process with high-speed steel on medium carbon steel10.1016/j.ijheatmasstransfer.2019.118990 ↗
45. Effect of static magnetic field on the molten pool dynamics during laser powder bed fusion of Inconel 718 superalloy10.1016/j.ijthermalsci.2023.108851 ↗
46. A coupled finite element-cellular autaomaton mode for the prediction of dendritic grain structures in solidification processes acta
47. Mechanical deformation of dendrites by fluid flow10.1007/BF02647763 ↗
48. Effects of electromagnetic compound field on the dendrite growth of laser cladding10.1016/j.surfcoat.2022.129118 ↗
49. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
50. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
51. Revealing the influence of ultrasound/heat treatment on microstructure evolution and tensile failure behavior in 3D-printing of Inconel 71810.1016/j.jmatprotec.2022.117574 ↗
52. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
53. Multi-component solid solution hardening10.1007/BF00540987 ↗
54. Solute strengthening from first principles and application to aluminum alloys10.1016/j.actamat.2012.03.037 ↗
55. Boundary strengthening over five length scales10.1002/adem.200500102 ↗
56. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
57. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel10.1016/j.ijheatmasstransfer.2016.08.049 ↗
58. Steady state columnar and equiaxed growth of dendrites and eutectic10.1016/0025-5416(84)90201-5 ↗
59. Single-crystal laser deposition of superalloys: processing-microstructure maps10.1016/S1359-6454(00)00367-0 ↗
60. The Interdependence theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
61. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing10.1016/j.actamat.2019.02.020 ↗