Li1·5Al0·3Si0·2Ti1·7P2·8O12 inorganic solid electrolyte for high-performance all-solid-state Li-ion batteries
Source abstract
Abstract
Commercial Li-ion batteries are vital to our daily lives, powering everything from portable devices to high-powered electric vehicles. The current usage of flammable liquid electrolytes in conventional Li-ion batteries creates risks, necessitating the development of solid electrolytes that are secure and reliable. However, the ionic conductivity of solid electrolytes cannot compete with liquid electrolytes. Herein, we report the synthesis of Li1·5Al0·3Si0·2Ti1·7P2·8O12 (LASTP) powder with improved ionic conductivity and evaluate its performance as a solid electrolyte in an all-solid-state battery (ASSB). A facile solution-based method is used for the LASTP synthesis with optimized sintering and calcination temperatures. As a result, the LASTP sintered at 1050 °C has the highest relative density (96.84%) and ionic conductivity (9.455 × 10−4 S/cm) with the lowest activation energy (Ea, 0.226 eV). A coin cell is assembled with Li/LASTP/Li(Ni0·65Co0·15Mn0.20)O2 all-solid-state configuration to evaluate the electrochemical performance. In addition, an electrospun polymer conductor film (PVDF-HFP) is added between the electrodes and the solid electrolyte to reduce the interfacial resistance. The ASSB has shown a stable and high performance with remarkable discharge capacity (205.3 mAh/g) at 0.1C and could be operated even after 100 cycles with 85.3% of retention at 0.2C. Therefore, the present work suggests that the LASTP solid electrolyte is a promising material for next-generation safe ASSBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
2. Solid-state Li–metal batteries: challenges and horizons of oxide and sulfide solid electrolytes and their interfaces
3. High ionic conductivity in lithium lanthanum titanate10.1016/0038-1098(93)90841-A ↗
4. Lithium ion conductors in the system AB(IV)2(PO4)3 (B = Ti, Zr and Hf)10.1016/0167-2738(86)90179-7 ↗
5. Preparation and conductivity measurements of SiS2 Li2S glasses doped with LiBr and LiCl10.1016/0167-2738(86)90142-6 ↗
6. A wide-ranging review on Nasicon type materials10.1007/s10853-011-5302-5 ↗
7. Defect formation and migration in Nasicon Li1+xAlxTi2−x(PO4)310.1039/C9CP04792A ↗
8. Phase behavior in rhombohedral NaSiCON electrolytes and electrodes10.1021/acs.chemmater.0c02695 ↗
9. Tape-cast water-stable NASICON-type high lithium ion conducting solid electrolyte films for aqueous lithium-air batteries
10. Characterisation and impedance spectroscopy of substituted Li1.3Al0.3Ti1.7(PO4)3−x(ZO4)x (Z=V, Nb) ceramics10.1016/S0167-2738(99)00212-X ↗
11. Spark plasma sintering of LiTi2(PO4)3-based solid electrolytes10.1111/j.1551-2916.2005.00246.x ↗
12. Effect of doping of trivalent cations Ga3+, Sc3+, Y3+ in Li1.3Al0.3Ti1.7 (PO4)3 (LATP) system on Li+ ion conductivity10.1016/j.physb.2016.08.020 ↗
13. Identifying Li+ ion transport properties of aluminum doped lithium titanium phosphate solid electrolyte at wide temperature range10.1016/j.ssi.2014.10.004 ↗
14. Effects of temperatures to the electrical properties of Li1.6Al0.6Sn1.4P3O12 NASICON type solid electrolytes10.1063/1.4999879 ↗
15. Atomistic analysis of Li migration in Li1+xAlxTi2−x(PO4)3 (LATP) solid electrolytes10.1016/j.ssi.2020.115521 ↗
16. Relationship between activation energy and bottleneck size for Li+ ion conduction in NASICON materials of composition LiMM‘(PO4)3; M, M‘ = Ge, Ti, Sn, Hf10.1021/jp973296c ↗
17. Small change—great effect: steep increase of Li ion dynamics in Li4Ti5O12 at the early stages of chemical Li insertion10.1021/cm504564k ↗
18. Effect of microcracking on ionic conductivity in LATP10.1016/j.jpowsour.2012.06.081 ↗
19. Synthesis of superionic conductive Li1+x+yAlxSiyTi2−xP3−yO12 solid electrolytes10.3390/nano12071158 ↗
20. Single-ion-conducting “polymer-in-ceramic” hybrid electrolyte with an intertwined NASICON-type nanofiber skeleton10.1021/acsami.1c17718 ↗
21. Failure mechanism and interface engineering for NASICON-structured all-solid-state lithium metal batteries10.1021/acsami.9b05516 ↗
22. Chemomechanical failure mechanism study in NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid-state lithium batteries10.1021/acs.chemmater.9b05295 ↗
23. Fabrication and characterization of polyvinylidenefluoride-co-hexafluoropropylene (PVDF-HFP) electrospun membranes for direct contact membrane distillation10.1016/j.memsci.2012.10.061 ↗
24. Development of a novel type of solid polymer electrolyte for solid state lithium battery applications based on lithium enriched poly (ethylene oxide) (PEO)/poly (vinyl pyrrolidone) (PVP) blend polymer10.1016/j.electacta.2017.03.118 ↗
25. A solid future for battery development10.1038/nenergy.2016.141 ↗
26. Stretchable electrospun PVDF-HFP/Co-ZnO nanofibers as piezoelectric nanogenerators10.1038/s41598-017-19082-3 ↗
27. Advanced multi-nozzle electrospun functionalized titanium dioxide/polyvinylidene fluoride-co-hexafluoropropylene (TiO2/PVDF-HFP) composite membranes for direct contact membrane distillation10.1016/j.memsci.2016.11.069 ↗
28. Characterization of poly (vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) nanofiber membrane based quasi solid electrolytes and their application in a dye sensitized solar cell10.1016/j.electacta.2018.02.025 ↗
29. Isothermal crystallization and effect of soak time on phase evolution, microstructure and ionic conductivity of Li2O–Al2O3–TiO2–P2O5 glass–ceramic10.1016/j.jnoncrysol.2016.02.016 ↗
30. Influence of crystallization temperature on ionic conductivity of lithium aluminum germanium phosphate glass-ceramic10.1016/j.jpowsour.2015.04.170 ↗
31. Optimized electrochemical performance of Ni rich LiNi0.91Co0.06Mn0.03O2 cathodes for high-energy lithium ion batteries10.1038/s41598-019-45531-2 ↗
32. Preparation and structural stability of LiNiO 2 in separate synthesis methods at different temperatures
33. Structural, impedance, dielectric and modulus analysis of LiNi1-x-y-0.02Mg0.02CoxZnyO2 cathode materials for lithium-ion batteries
34. Enhanced electrochemical performance of ZrO2 modified LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries10.1016/j.ceramint.2017.08.048 ↗
35. Enhanced cyclability and safety performance of LiNi0.6Co0.2Mn0.2O2 at elevated temperature by AlPO4 modification10.1016/j.jallcom.2019.151834 ↗
36. Investigation of new manganese orthophosphate Mn3(PO4)2 coating for nickel-rich LiNi0.6Co0.2Mn0.2O2 cathode and improvement of its thermal properties10.1016/j.electacta.2016.03.079 ↗
37. An integrated device of a lithium-ion battery combined with Silicon solar cells10.3390/en14196010 ↗
38. Lithium ion-conducting glass–ceramics of Li1.5Al0.5Ge1.5(PO4)3–xLi2O (x=0.0–0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
39. Stabilizing the interface of NASICON solid electrolyte against Li metal with atomic layer deposition10.1021/acsami.8b06366 ↗
40. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
41. Chlorinated dual-protective layers as interfacial stabilizer for dendrite-free lithium metal anode10.1016/j.ensm.2021.06.023 ↗
42. Improving cathode/Li6.4La3Zr1.4Ta0.6O12 electrolyte interface with a hybrid PVDF-HFP-based buffer layer for solid lithium battery10.1007/s10853-020-04701-8 ↗
43. Molecular reconfigurations enabling active liquid–solid interfaces for ultrafast Li diffusion kinetics in the 3D framework of a garnet solid-state electrolyte10.1039/D1TA03569J ↗
44. Consolidating the grain boundary of the garnet electrolyte LLZTO with Li3BO3 for high-performance LiNi0.8Co0.1Mn0.1O2/LiFePO4 hybrid solid batteries10.1039/C9TA03263K ↗
45. Enhanced critical current density of Garnet Li7La3Zr2O12 solid electrolyte by incorporation of LiBr10.1016/j.electacta.2022.139986 ↗
46. Enhanced electrochemical performance of bulk type oxide ceramic lithium batteries enabled by interface modification10.1039/C7TA06833F ↗
47. Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries10.1016/j.apsusc.2023.156741 ↗
48. High areal capacity LiNi1/3Co1/3Mn1/3O2 positive composite electrode employing an oxide solid electrolyte for an all-solid-state lithium-ion battery10.1016/j.ssi.2022.115905 ↗
49. Significant reduction in the interfacial resistance of garnet-type solid electrolyte and lithium metal by a thick amorphous lithium silicate layer10.1021/acsaem.0c00511 ↗
50. Efficient anion fluoride-doping strategy to enhance the performance in garnet-type solid electrolyte Li7La3Zr2O1210.1021/acsami.1c21951 ↗
51. Effect of organic electrolyte on the performance of solid electrolyte for solid–liquid hybrid lithium batteries10.1021/acsami.0c19671 ↗