Preparation of fluorescent UV-curable adhesives containing AIEgen-modified monomer
Source abstract
Abstract
Epoxy acrylate (EA) is the most widely used prepolymer for an ultraviolet (UV)-curable adhesive. Its colorless and transparent appearance can meet some special application needs, but also bring some problems, such as the position and amount of adhesive cannot be well observed by the naked eye, and so that malposition, shortage, or leakage of adhesive may happen. The UV-curable EA adhesive with UV light-excited fluorescence can be used to locate the adhesive through simple visual observation, but would not interfere with the macroscopic appearance of the glued item under natural light. Here we introduced tetraphenylethylene (TPE), a typic structure having aggregation-induced emission (AIE) effect, into the adhesive system. TPE-modified methacrylate (TPE-MA) monomer was added to UV-curable EA adhesive to participate in the curing process. The concentration of TPE-MA added to the adhesive was optimized to 0.1 % of the amount of EA prepolymer in mol to give blue fluorescence under UV light . By comparing the cured products, we found that the one having TPE-MA to form covalent bonds with other components, has higher fluorescence intensity and better stability than the other one having TPE via simple blending. Finally, tensile lap-shear strength measurement and thermal analysis of the cured products revealed that the addition of a small amount of TPE-MA to the adhesive has no significant effect on the performance of the adhesive. In conclusion, due to the viscosity of the adhesive itself, the intramolecular movement of TPE is restricted even at dilute concentrations, resulting in blue fluorescence. We hope this study can open a new avenue for the preparation of fluorescent adhesives.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photopolymerization techniques and applications · Luminescence and Fluorescent Materials · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Cationic UV-curing: Technology and applications10.1002/mame.201300349 ↗
2. State-of-the-Art and future challenges of UV curable polymer-based smart materials for printing technologies10.1002/admt.201800618 ↗
3. Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing10.1039/C8TB00673C ↗
4. Preparation of UV curable organic/inorganic hybrid coatings-a review10.1016/j.porgcoat.2020.105685 ↗
5. UV curable conductive ink for the fabrication of textile-based conductive circuits and wearable UHF RFID tags10.1021/acsami.9b06432 ↗
6. Kinetic study and new applications of UV radiation curing10.1002/marc.200290014 ↗
7. Preparation and properties of novel high performance UV-curable epoxy acrylate/hyperbranched polysiloxane coatings10.1016/j.porgcoat.2011.11.026 ↗
8. Synthesis and photopolymerization of hyperbranched polyurethane acrylates applied to UV curable flame retardant coatings10.1002/pi.827 ↗
9. Environmentally-friendly UV-curable coatings utilizing bio-based polyester acrylates10.1016/j.porgcoat.2022.107356 ↗
10. One-step synthesis of novel multifunctional silicone acrylate prepolymers for use in UV-curable coatings10.1016/j.porgcoat.2021.106601 ↗
11. Photoinitiated crosslinking polymerization10.1016/0079-6700(95)00027-5 ↗
12. Removable/fluorescent adhesive made by melamine-formaldehyde cross-linked polyvinyl alcohol and its repair application in artifacts10.1016/j.apsusc.2019.143570 ↗
13. Determining optimal fluorescent agent concentrations in dental adhesive resins for imaging the tooth/restoration interface10.1017/S143192761601271X ↗
14. Functionalized epoxy with adjustable fluorescence and UV-shielding enabled by reactive addition of 9-anthracenemethoxyl glycidyl ether10.1039/D1RA07433D ↗
15. UV fluorescent epoxy adhesives from noncovalent and covalent incorporation of coumarin dyes10.1021/acsami.6b13218 ↗
16. Influence of fluorescent dye on mechanical properties of adhesive systems10.1016/j.ijadhadh.2013.08.007 ↗
17. Macrocycles and cages based on tetraphenylethylene with aggregation-induced emission effect10.1039/C8CS00444G ↗
18. Mechanistic connotations of restriction of intramolecular motions (RIM)10.1093/nsr/nwaa260 ↗
19. Studying a novel AIE coating and its handling process via fluorescence spectrum10.1039/C7RA06527B ↗
20. Materials interaction in aggregation-induced emission (AIE)-based fluorescent resin for smart coatings10.1039/C8TC04175J ↗
21. Developments in reactive diluents: a review10.1007/s00289-021-03808-5 ↗
22. Duan · 2022
23. Yao · 2007
24. Li · 2008
25. Preparation and characterization of dual curable adhesives containing epoxy and acrylate functionalities10.1016/j.reactfunctpolym.2013.01.012 ↗