Finely designed medium-band-gap polymer donor with judiciously selecting chalcogen atom for high efficiency polymer solar cell
Source abstract
Abstract
Abstract A novel medium band gap copolymer ( PBO ) based on benzodithiophene (BDT) and benzoxadiazole (BOz) was synthesized and applied in polymer solar cells (PSCs). The introduction of two alkylthio side chains onto the BDT unit can endow the resulting polymer ( PBO ) with good solubility in solutions and good crystallinity in the solid state. The low HOMO level of −5.52 eV and the broad absorption ranging from 350 to 700 nm make PBO a promising donor material for PSCs. Power conversion efficiency higher than 7% has been achieved for devices using PBO as the donor material and PC 71 BM or ITIC as the acceptor material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Organic photovoltaics – polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
2. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
3. Molecular bulk heterojunctions: an emerging approach to organic solar cells10.1021/ar900041b ↗
4. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
5. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7% efficiency10.1002/anie.201005451 ↗
6. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
7. Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments10.1021/ja409881g ↗
8. Highly efficient 2d-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
9. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
10. A cross-linkable donor polymer as the underlying layer to tune the active layer morphology of polymer solar cells10.1002/adfm.201503833 ↗
11. 6,7-dialkoxy-2,3-diphenylquinoxaline based conjugated polymers for solar cells with high open-circuit voltage10.1007/s10118-013-1275-y ↗
12. Evaluating the photovoltaic properties of two conjugated polymers synthesized by Suzuki polycondensation and direct C-H activation10.1007/s11426-014-5278-5 ↗
13. n-Type organic semiconductors in organic electronics10.1002/adma.200903628 ↗
14. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
15. A solution-processable electron acceptor based on dibenzosilole and diketopyrrolopyrrole for organic solar cells10.1002/aenm.201200911 ↗
16. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
17. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
18. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
19. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
20. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
21. A nonfullerene acceptor for wide band gap polymer based organic solar cells10.1039/C5CC08023A ↗
22. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
23. Transient extraction of holes and electrons separately unveils the transport dynamics in organic photovoltaics10.1002/aelm.201500333 ↗
24. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
25. Polymer solar cells: solubility controls fiber network formation10.1021/jacs.5b07228 ↗
26. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
27. Fullerene-Free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
28. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
29. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells10.1021/ja1112595 ↗
30. Nanomorphology of PCDTBT: PC70BM bulk heterojunction solar cells10.1002/aenm.201100667 ↗
31. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
32. Li, non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2d-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
33. Enhanced and tunable open-circuit voltage using dialkylthio benzo 1,2-b:4,5-b ' dithiophene in polymer solar cells10.1021/cm3011056 ↗
34. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
35. Novel green light-emitting diode with high efficiency; Synthesis and electroluminescent property of poly(2-(2'-ethylhexylthio)-5-methoxy-1,4-phenylenevinylene) (PMEHTPV)10.1002/(SICI)1099-0518(199708)35:11<2253::AID-POLA15>3.0.CO;2-D ↗
36. Effects of alkylthio and alkoxy side chains in polymer donor materials for organic solar cells10.1002/marc.201500620 ↗
37. Alkylthio-substituted polythiophene: absorption and photovoltaic properties10.1002/marc.200800785 ↗
38. High-performance polymer solar cells based on a 2D-conjugated polymer with an alkylthio side-chain10.1039/C5EE03684D ↗
39. Functionalization of phosphorescent emitters and their host materials by main-group elements for phosphorescent organic light-emitting devices10.1039/C5CS00424A ↗
40. New alkoxylphenyl substituted benzo 1,2-b:4,5-b′ dithiophene-based polymers: synthesis and application in solar cells10.1039/c3ta11968h ↗
41. Benzothiadiazole based conjugated polymers for high performance polymer solar cells10.1039/C5TA06065F ↗
42. Nature of Hydrogen Bonds and S center dot center dot center dot S Interactions in the L-Cystine Crystal10.1021/acs.jpca.6b03167 ↗
43. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
44. Charge-transfer state energy and its relationship with open-circuit voltage in an organic photovoltaic device10.1021/acs.jpcc.6b02375 ↗
45. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
46. Relating the open-circuit voltage to interface molecular properties of donor:acceptor bulk heterojunction solar cells10.1103/PhysRevB.81.125204 ↗
47. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗