journal article·2017-04

Hydrothermal-mediated synthesis of orange Cr, Sb-containing TiO 2 nano-pigments with improved microstructure

José Miguel Calatayud, Pablo Pardo, Javier Alarcón

Dyes and Pigments· Volume 139
Publisher page

Abstract

Abstract A hydrothermal-mediated via was developed to prepare discrete, non-aggregated Cr,Sb-doped rutile nano-pigments. After annealing the Cr- and Sb-containing TiO2 anatase nanocrystals obtained by hydrothermal aging the nano-pigments Cr,Sb-TiO2 were characterized with the aid of X-ray diffraction (XRD) including lattice parameter and crystallite size determination, Raman spectroscopy, field emission scanning and transmission electron microscopies (FESEM and TEM, respectively) including energy-dispersive X-ray (FESEM/EDX) spectroscopy, high resolution transmission electron microscopy (HRTEM) including selected area electron diffraction (SAED), ultraviolet–visible diffuse reflectance (UV–Vis DR) spectroscopy and chromatic coordinates determination. SEM and TEM micrographs of short annealed anatase-based intermediates at 800 °C proved the formation of monocrystalline Cr,Sb-TiO2 rutile nanocrystals sized under 60 nm with well-defined morphologies. The chromatic coordinates of the rutile-based nano-pigments, both as-prepared and after glazing, reached similar values to those displayed by conventional micrometrics and of those already reported non-conventional nanometric orange pigmenting systems. Zeta (ζ) potential measurements of aqueous dispersions of the prepared nano-pigments indicated good dispersability. The optimum microstructural features of the prepared nano-pigments by the hydrothermal-mediated approach could facilitate the application of these nano-pigments by ink-jet printing. The results obtained in this paper confirmed the solid solution nature of this nano-pigmenting system in the whole range of the studied compositions as well as proved the feasibility of the proposed synthetic approach for the preparation of nano-pigments even when some structural stabilization by additional thermal annealing is required.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Classification of mixed-metal-oxide inorganic pigments
2. Baldi G, Bitossi M, Barzanti A. Ceramic colorants in the form of nanometric suspensions. US Patent 2008;7316741 B2.
3. Color performance of ceramic nano-pigments10.1016/j.dyepig.2008.07.004 ↗
4. Nano-sized ceramic inks for drop-on-demand ink-jet printing in quadrichromy10.1166/jnn.2008.048 ↗
5. Cr- and Sb-containing TiO2 inorganic orange nano-pigments prepared by a relative long hydrocarbon chain polyol10.1016/j.dyepig.2016.06.034 ↗
6. Hydrothermal synthesis and optical property of nano-sized CoAl2O4 pigment10.1016/S0167-577X(02)00378-6 ↗
7. Synthesis of nano CoAl2O4 pigment for ink-jet printing to decorate porcelain10.2109/jcersj2.119.208 ↗
8. Characterization of Blue CoAl2O4 nano-pigment synthesized by ultrasonic hydrothermal method10.1016/j.ceramint.2012.04.015 ↗
9. Pigments based on Cr and Sb doped TiO2 by microemulsion-mediated solvothermal synthesis for inkjet printing on ceramics10.1016/j.dyepig.2015.01.016 ↗
10. Recent development on the preparation of ceramic inks in ink-jet printing10.1016/j.ceramint.2015.06.124 ↗
11. Synthesis of uniform spindle-type titania particles by the sol-gel method10.1006/jcis.1997.5037 ↗
12. Synthesis of peroxo-modified anatase sol from peroxo titanic acid solution10.2109/jcersj.104.715 ↗
13. A novel method for preparation of nanocrystalline rutile TiO2 powders by liquid hydrolysis of TiCl410.1039/b200018k ↗
14. Hydrothermal synthesis of nanosized anatase and rutile TiO2 using amorphous phase TiO210.1039/b008974p ↗
15. Hydrothermal preparation of nanosized brookite powders10.1111/j.1151-2916.2000.tb01605.x ↗
16. Low temperature deposition of TiO2 layers from nanoparticle containing suspensions synthesized by microwave hydrothermal treatment10.1007/s10971-013-2972-2 ↗
17. Deposition of photocatalytically active TiO2 films by ink jet printing of TiO2 nanoparticle suspensions obtained from microwave-assisted hydrothermal synthesis10.1088/0957-4484/23/16/165603 ↗
18. Asymmetric lattice vibrational characteristics of rutile TiO2 as revealed by laser power dependent Raman spectroscopy10.1021/jp406948e ↗
19. Size-dependent modifications of the first-order Raman spectra of nanostructured rutile TiO210.1103/PhysRevB.77.195414 ↗
20. Effective ionic radii in oxides and fluorides10.1107/S0567740869003220 ↗
21. Marfunin · 1979
22. Synthesis of uvarovite garnet10.1111/j.1151-2916.1989.tb05974.x ↗
23. One-step preparation, characterization and visible light photocatalytic activity of Cr-doped TiO2 with anatase and rutile bicrystalline phases10.1016/j.cej.2012.03.038 ↗
24. Aqueous colloidal stability evaluated by zeta potential measurement and resultant TiO2 for superior photovoltaic performance10.1111/jace.12371 ↗
25. Role of surface area, primary particle size, and crystal phase on titanium dioxide nanoparticle dispersion properties10.1007/s11671-010-9772-1 ↗
26. UV and visible light active aqueous titanium dioxide colloids stabilized by surfactants10.1039/C4DT00285G ↗
27. Ceramic pigments for digital decoration inks: an overview