Short term tribological behavior of ceramic and polyethylene biomaterials for hip prosthesis
Source abstract
Abstract
Abstract Reduction in wear of artificial bio-implants results in the release of a lesser amount of wear particles into the blood stream. This paper focuses on analyzing the tribological behavior of ceramic and polyethylene bio-materials experimentally. Four different biomaterials namely Zirconia, Silicon Nitride, UHMWPE (ultra high molecular weight polyethylene) and PEEK (polyether ether ketone) are investigated for friction and wear coefficients using a pin on disc (PoD) tribometer. Alumina (Al2O3) is chosen as the disc material. Polyethylene based UHMWPE and PEEK are used as a pin material with the hemispherical end, while, Zirconia and Silicon Nitride ceramic materials are used in the form of spherical ball. 0.9 % NaCl (saline solution) is used as a lubricant medium. Zirconia showed a better reduction in friction and wear coefficient characteristics under lubrication conditions when compared with polyethylene and other ceramic materials. The estimated friction and wear coefficients would be helpful for surgeons and academicians to choose better wear-resistant bio-compatible materials for effectively design hip prosthesis. The present study compared the tribological behaviors of ceramic materials Si3N4 and ZrO2 and polyethylene materials PEEK and UHMWPE with a ceramic counterpart Al2O3 disc. In the lubrication case, ZrO2 showed a better reduction in friction and wear characteristics while in the dry case UHMWPE showed lesser wear characteristics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Total Knee Arthroplasty Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Erode , India
References (21)
Show source-provided references
1. A. Essner, K. Sutton, A. Wang: Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings, Wear 259 (2005), No. 7-12, pp. 992-995 DOI:10.1016/j.wear.2005.02.10410.1016/j.wear.2005.02.104 ↗
2. V. Saikko: A hip wear simulator with 100 test stations, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 219 (2005), No. 5, pp. 309-318 DOI:10.1243/095441105X3430110.1243/095441105X34301 ↗
3. L. Wilches, J. Uribe, A. Toro: Wear of materials used for artificial joints in total hip replacements, Wear 265 (2008), No. 1-2, pp. 143-149 DOI:10.1016/j.wear.2007.09.01010.1016/j.wear.2007.09.010 ↗
4. Y. Higuchi, Y. Hasegawa, T. Seki, D. Komatsu, N. Ishiguro: Significantly lower wear of ceramic-on-ceramic bearings than metal-on-highly cross-linked polyethylene bearings: a 10-to 14-year follow-up study, The Journal of Arthroplasty 31 (2016), No. 6, pp. 1246-1250 DOI:10.1016/j.arth.2015.12.01410.1016/j.arth.2015.12.014 ↗
5. A. Ruggiero, E. Gómez, M. Merola: Experimental comparison on tribological pairs UHMWPE/ TIAL6V4 alloy, UHMWPE/AISI316 L austenitic stainless and UHMWPE/Al2O3 ceramic, under dry and lubricated conditions, Tribology International 96 (2016), pp. 349-360 DOI:10.1016/j.triboint.2015.12.04110.1016/j.triboint.2015.12.041 ↗
6. A. Borruto: A new material for hip prosthesis without considerable debris release, Medical Engineering and Physics 32 (2010), No. 8, pp. 908-913 DOI:10.1016/j.medengphy.2010.06.00710.1016/j.medengphy.2010.06.007 ↗
7. J. P. Davim, N. Marques: Evaluation of tribological behaviour of polymeric materials for hip prostheses application, Tribology Letters 11 (2001), No. 2, pp. 91-94 DOI:10.1023/A:101660740039210.1023/A:1016607400392 ↗
8. H. Tiusanen, K. Mäkelä, M. Kiilunen, P. Sarantsin, E. Sipola, M. Pesola: The effect of different bearing surfaces on metal ion levels in urine following 28 mm metal-on-metal and 28 mm metal-on-polyethylene total hip arthroplasty, Scandinavian Journal of Surgery 102 (2013), No. 3, pp. 197-203 DOI:10.1177/145749691349187410.1177/1457496913491874 ↗
9. E. Atar: A study on wear testing of orthopedic implant materials in simulated body fluid, Materials Testing 55 (2013), No. 2, pp. 103-108 DOI:10.3139/120.11041610.3139/120.110416 ↗
10. H. S. Hedia, N. Fouda: A new design of dental implant coating using functionally graded material, Materials Testing 55 (2013), No. 10, pp. 765-771 DOI:10.3139/120.11049910.3139/120.110499 ↗
11. S. Affatato, G. Bersaglia, I. Foltran, D. Emiliani, F. Traina, A. Toni: The influence of implant position on the wear of alumina-on-alumina studied in a hip simulator, Wear 256 (2004), No. 3-4, pp. 400-405 DOI:10.1016/S0043-1648(03)00455-110.1016/S0043-1648(03)00455-1 ↗
12. S. Hanna, L. Somerville, R. McCalden, D. Naudie, S. MacDonald: Highly cross-linked polyethylene decreases the rate of revision of total hip arthroplasty compared with conventional polyethylene at 13 years’ follow-up, The Bone and Joint Journal 98 (2016), No. 1, pp. 28-32 DOI:10.1302/0301-620X.98B1.3652710.1302/0301-620X.98B1.36527 ↗
13. A. Aherwar, A. Patnaik, M. Bahraminasab, A. Singh: Preliminary evaluations on development of new materials for hip joint femoral head, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials, Design and Applications 233 (2019), No. 5, pp. 885-899 DOI:10.1177/146442071771449510.1177/1464420717714495 ↗
14. S. Mojumder, S. Sikdar, S. K. Ghosh: Experimental study of wear for implant materials under dry sliding conditions, Industrial Lubrication and Tribology 69 (2017), No. 6, pp. 828-832 DOI:10.1108/ILT-04-2016-007910.1108/ILT-04-2016-0079 ↗
15. M. Guezmil, W. Bensalah, S. Mezlini: Tribological behavior of UHMWPE against TiAl6V4 and CoCr28Mo alloys under dry and lubricated conditions, Journal of the Mechanical Behavior of Biomedical Materials 63 (2016), pp. 375-385 DOI:10.1016/j.jmbbm.2016.07.00210.1016/j.jmbbm.2016.07.002 ↗
16. S. Shankar, R. Nithyaprakash, A. Sugunesh, K. Selvamani, M. Uddin: Experimental and finite element wear study of silicon nitride against alumina for hip implants with biolubricant for various gait activities, Silicon (2020), to be published DOI:10.1007/s12633-020-00462-w10.1007/s12633-020-00462-w ↗
17. M. Sumer,H. Unal, A. Mimaroglu: Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions, Wear 265 (2008), No. 7-8, pp. 1061-1065 DOI:10.1016/j.wear.2008.02.00810.1016/j.wear.2008.02.008 ↗
18. F. Guo, Z. Wang, Y. Liu, Y. Wang.Y. Tian: Investigation of ultra-low friction between self-mated Si3N4 in water after running-in, Tribology International 115 (2017), pp. 365-369 DOI:10.1016/j.triboint.2017.06.00610.1016/j.triboint.2017.06.006 ↗
19. V. Saikko, T. Ahlroos, O. Calonius, J. Keränen: Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon, Biomaterials 22 (2001), No. 12, pp. 1507-1514 DOI:10.1016/S0142-9612(00)00306-910.1016/S0142-9612(00)00306-9 ↗
20. J. D’Antonio, W. Capello, M. Manley, B. Bierbaum: New experience with alumina-on-alumina ceramic bearings for total hip arthroplasty, The Journal of Arthroplasty 17 (2002), No. 4, pp. 390-397 DOI:10.1054/arth.2002.3218310.1054/arth.2002.32183 ↗
21. B. S. Bal, A. Khandkar, R. Lakshminarayanan, I. Clarke, A. A. Hoffman, M. N. Rahaman: Fabrication and testing of silicon nitride bearings in total hip arthroplasty: winner of the 2007 “HAP” PAUL award, The Journal of Arthroplasty 24 (2009), No. 1, pp. 110-116 DOI:10.1016/j.arth.2008.01.30010.1016/j.arth.2008.01.300 ↗