journal article·2018-04-05

Mechanical behavior of mode-I crack propagation between composite adhesive joints

İsmail Yasin Sülü

Materials Testing· Volume 60· Issue 4
Publisher page

Abstract

Abstract Failure testing and an analysis of mode-I crack propagation between composite parts joint with adhesive was the object of this investigation. We offer a finite element analysis (FEA) for calculating failure loads when simulating crack growth between three-dimensional composite parts joint with adhesive as well as an analysis of the effect of crack length on adhesive joint performance. Likewise, we have examined the effects of orientation angles on crack length and failure load. For this analysis, composite parts are made of carbon/epoxy (AS4/3501-6) with different fiber orientation angles. DP 410 was the adhesive used. The models for the numerical analyses were generated by using an ANSYS software package. The finite element analyses were carried out in order to predict failure loads. Stress at x, y, z directions, shear stress and von-Mises stress on adhesive were obtained at the time of failure for predetermined parameters. Lastly, we examined the effects of orientation angles, crack length, and...
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Malatya, Turkey

References (26)

Show source-provided references
1. 10.1016/S1359-8368(97)00034-610.1016/S1359-8368(97)00034-6 ↗
2. Taib A. A. · Bonded joints with composite adherends. Part I. Effect of specimen conguration, adhesive thickness, spew llet and adherend stiffness on fracture, Int. J. Adhes. Adhes. · 2006 · 26 · 226
3. 10.1016/j.tafmec.2015.09.007.10.1016/j.tafmec.2015.09.007. ↗
4. 10.1016/j.engfracmech.2009.09.01810.1016/j.engfracmech.2009.09.018 ↗
5. Krause T. · Interlaminar Mode I crack growth energy release rate of carbon/carbon composites, Eng. Frac. Mech. · 2013 · 100 · 38
6. Jiang Z. · Effect of curved delamination front on mode-I fracture toughness of adhesively bonded joints, Eng. Frac. Mech. · 2015 · 138 · 73
7. 10.1016/j.tafmec.2014.05.00610.1016/j.tafmec.2014.05.006 ↗
8. 10.1007/s10704-015-9996-210.1007/s10704-015-9996-2 ↗
9. 10.1007/s10704-016-0171-110.1007/s10704-016-0171-1 ↗
10. 10.1007/s10704-016-0165-z10.1007/s10704-016-0165-z ↗
11. 10.1007/s10704-012-9756-510.1007/s10704-012-9756-5 ↗
12. 10.3139/120.11091810.3139/120.110918 ↗
13. 10.1007/s10704-016-0112-z10.1007/s10704-016-0112-z ↗
14. 10.1007/s10704-016-0101-210.1007/s10704-016-0101-2 ↗
15. Jamali J. · Through-thickness fracture behavior of unidirectional glass bers/epoxy composites under various in-plane loading using the CTS test, Eng. Fract. Mech. · 2016 · 156 · 83
16. Tahani M. · On thermomechanical stress analysis of adhesively bonded composite joints in presence of an interfacial void, Compos. Struct. · 2015 · 130 · 116
17. 10.1016/j.compositesb.2014.03.00110.1016/j.compositesb.2014.03.001 ↗
18. Sülü İ. Y. · Layer effects of multi-layered face to face adhesively bonded composite pipes subjected to internal pressure, Academic J. Sci. · 2015 · 04 · 195
19. 10.1016/j.ijmecsci.2014.02.02410.1016/j.ijmecsci.2014.02.024 ↗
20. 10.1016/S0266-3538(00)00039-710.1016/S0266-3538(00)00039-7 ↗
21. Camponeschi E. T. · 1990
22. 10.1163/15685610677888426210.1163/156856106778884262 ↗
23. 10.3139/120.11102910.3139/120.111029 ↗
24. 10.3139/120.11099610.3139/120.110996 ↗
25. 10.3139/120.11107010.3139/120.111070 ↗
26. 10.1080/01694243.2017.138537610.1080/01694243.2017.1385376 ↗