journal article·2026-07-22

Experimental, numerical, and multi-objective optimization analysis of atmospheric pressure cold plasma treatment on aluminum 7075 T6-CFRP adhesive joints

Yunus Emre Nehri, Ali Oral, Kadir Çavdar, Kaan Ferikel

Publisher page

Abstract

Abstract In this study, the effects of atmospheric pressure cold plasma treatment on surface contact angles and adhesive joint performance of aluminum 7075-T6 alloy and carbon fiber reinforced polymer composites were investigated using experimental, numerical, and statistical methods. A full factorial experimental design was applied to evaluate three plasma parameters: application distance, number of passes, and application speed. Contact angle measurements were conducted to assess surface activation, and single lap adhesive joints were fabricated and tested to determine lap shear strength. The results were analyzed using analysis of variance to identify significant parameters and their contribution ratios. Process–output relationships were modeled using response surface methodology. Finite element analyses with LS-DYNA were performed to investigate stress distributions and mechanical behavior of the adhesive joints. Multi-objective optimization was carried out using the non-dominated sorting genetic algorithm II to minimize contact angles and maximize lap shear strength. Application distance was found to be the most influential parameter. The lowest contact angles and highest lap shear strength were achieved at high number of passes and low application distance and speed. Numerical results showed good agreement with experiments, and a Random Forest model was used to improve prediction accuracy within the optimization framework.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Surface Modification and Superhydrophobicity · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering , Balikesir University , 10145 , Balikesir , Balıkesir , Türkiye

Mechanical Engineering , Balikesir University , 10100 , Balikesir , Balıkesir Province , Türkiye

Mechanical Engineering , Bursa Uludag Universitesi , 16059 , Nilufer , Türkiye

Mechanical Engineering , Sakarya University , 54050 , Sakarya , Türkiye

References (75)

Show source-provided references
1. L. Wen, R. Wang, and E. Xu, “Optimization and mechanism study of bonding properties of CFRP/Al7075 single-lap joints by low-temperature plasma surface treatment,” Coatings, vol. 14, no. 5, p. 541, 2024, https://doi.org/10.3390/coatings14050541.10.3390/coatings14050541 ↗
2. Z. Xu, W. Yip, Z. Dong, M. Uddin, and G. Stevens, “On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates,” Compos. Interfaces, vol. 31, no. 1, pp. 123–141, 2024, https://doi.org/10.1080/09276440.2023.2235804.10.1080/09276440.2023.2235804 ↗
3. T. Turkoglu, “Impact of lattice designs and production parameters on mechanical properties of AlSi10Mg in laser powder bed fusion,” Mater. Test., vol. 66, no. 12, pp. 1980–1989, 2024, https://doi.org/10.1515/mt-2024-0297.10.1515/mt-2024-0297 ↗
4. M. Özgür Bora, O. Çoban, E. Akman, B. G. Oztoprak, and T. Kutluk, “Comparison of novel surface treatments of Al 2024 alloy for al/cfrp adhesive bonded joints,” Int. J. Adhes. Adhes., vol. 103, no. 2020, 2020, https://doi.org/10.1016/j.ijadhadh.2020.102721.10.1016/j.ijadhadh.2020.102721 ↗
5. J. H. Kim et al.., “Intense pulsed light surface treatment for improving adhesive bonding of aluminum and carbon fiber reinforced plastic (CFRP),” Compos. Struct., vol. 258, 2021, Art. no. 113364, https://doi.org/10.1016/j.compstruct.2020.113364.10.1016/j.compstruct.2020.113364 ↗
6. L. Duan et al.., “Investigation on shear and fatigue performance of CFRP/aluminum alloy single-lap adhesive joint,” Thin-Walled Struct., vol. 196, no. November 2023, 2024, Art. no. 111421, https://doi.org/10.1016/j.tws.2023.111421.10.1016/j.tws.2023.111421 ↗
7. F. B. Kilinc, T. Turkoglu, S. Guler, and A. C. Kilinc, “Optimization of 3D printing parameters for enhanced tensile properties in continuous carbon fiber reinforced PLA composites,” Mater. Res. Express, vol. 12, no. 4, pp. 0–17, 2025, https://doi.org/10.1088/2053-1591/adc5cc.10.1088/2053-1591/adc5cc ↗
8. J. Kundu, A. Sethi, S. Mandal, and P. Saha, “Heterogeneous adhesive bonding between different CFRPs and Al 7075 after different surface treatments: A study on the selective practical applicability of the resin pre-coating (RPC) technique,” Polym. Compos., vol. 46, no. 9, pp. 8175–8198, 2025, https://doi.org/10.1002/pc.29486.10.1002/pc.29486 ↗
9. M. R. Samadi, M. H. Alaei, and J. E. Jam, “Numerical and experimental analysis of Al/GFRP joint for optimization of adhesive bonding strength using response surface method by considering surface patterning of the joints,” Int. J. Adhes. Adhes., vol. 136, no. August 2024, 2025, Art. no. 103877, https://doi.org/10.1016/j.ijadhadh.2024.103877.10.1016/j.ijadhadh.2024.103877 ↗
10. X. Liu, X. Shao, Q. Li, and G. Sun, “Failure mechanisms in carbon fiber reinforced plastics (CFRP)/aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension,” Compos. Part B Eng., vol. 172, no. April, pp. 339–351, 2019, https://doi.org/10.1016/j.compositesb.2019.04.036.10.1016/j.compositesb.2019.04.036 ↗
11. S. Akpinar and İ. A. Akpinar, “Influence of carbon and glass fiber reinforced composite adhesive on the strength of adhesively bonded joints,” Mater. Test., vol. 65, no. 5, pp. 802–814, 2023, https://doi.org/10.1515/mt-2022-0284.10.1515/mt-2022-0284 ↗
12. Y. Zuo, T. Yue, R. Jiang, Z. Cao, and L. Yang, “Bolt insertion damage and mechanical behaviors investigation of CFRP/CFRP interference fit bolted joints,” Chinese J. Aeronaut., vol. 35, no. 9, pp. 354–365, 2022, https://doi.org/10.1016/j.cja.2022.01.027.10.1016/j.cja.2022.01.027 ↗
13. J. Hu, K. Zhang, Q. Yang, H. Cheng, P. Liu, and Y. Yang, “An experimental study on mechanical response of single-lap bolted CFRP composite interference-fit joints,” Compos. Struct., vol. 196, no. May, pp. 76–88, 2018, https://doi.org/10.1016/j.compstruct.2018.05.016.10.1016/j.compstruct.2018.05.016 ↗
14. L. Lee, Adhesive Bonding, Boston, MA, Springer US, 1991.10.1007/978-1-4757-9006-1 ↗
15. M. Saleem, R. Zitoune, I. El Sawi, and H. Bougherara, “Role of the surface quality on the mechanical behavior of CFRP bolted composite joints,” Int. J. Fatigue, vol. 80, pp. 246–256, 2015, https://doi.org/10.1016/j.ijfatigue.2015.06.012.10.1016/j.ijfatigue.2015.06.012 ↗
16. J. Li, Y. Li, K. Zhang, P. Liu, and P. Zou, “Interface damage behaviour during interference‐fit bolt installation process for CFRP/Ti alloy joining structure,” Fatigue Fract. Eng. Mater. Struct., vol. 38, no. 11, pp. 1359–1371, 2015, https://doi.org/10.1111/ffe.12313.10.1111/ffe.12313 ↗
17. Y. Zuo, Z. Cao, G. Zheng, and Q. Zhang, “Damage behavior investigation of CFRP/Ti bolted joint during interference fit bolt dynamic installation progress,” Eng. Fail. Anal., vol. 111, no. February, 2020, Art. no. 104454, https://doi.org/10.1016/j.engfailanal.2020.104454.10.1016/j.engfailanal.2020.104454 ↗
18. M. Hashemzadeh, Y. Garbatov, and C. Guedes Soares, “Welding-induced residual stresses and distortions of butt-welded corroded and intact plates,” Mar. Struct., vol. 79, no. April, 2021, Art. no. 103041, https://doi.org/10.1016/j.marstruc.2021.103041.10.1016/j.marstruc.2021.103041 ↗
19. N. G. Gonzalez-Canche, E. A. Flores-Johnson, P. Cortes, and J. G. Carrillo, “Evaluation of surface treatments on 5052-H32 aluminum alloy for enhancing the interfacial adhesion of thermoplastic-based fiber metal laminates,” Int. J. Adhes. Adhes., vol. 82, no. December 2017, pp. 90–99, 2018, https://doi.org/10.1016/j.ijadhadh.2018.01.003.10.1016/j.ijadhadh.2018.01.003 ↗
20. T. S. M. Mui, L. L. G. Silva, V. Prysiazhnyi, and K. G. Kostov, “Surface modification of aluminium alloys by atmospheric pressure plasma treatments for enhancement of their adhesion properties,” Surf. Coatings Technol., vol. 312, pp. 32–36, 2017, https://doi.org/10.1016/j.surfcoat.2016.08.024.10.1016/j.surfcoat.2016.08.024 ↗
21. N. Anagreh, R. Dweiri, and S. Masadeh, “Characterization of adhesively bonded high strength steel surfaces treated with grit blasting and self-indicating pretreatment (SIP) adhesion mediator,” Mater. Test., vol. 59, no. 10, pp. 891–902, 2017, https://doi.org/10.3139/120.111094.10.3139/120.111094 ↗
22. P. M. Bellan, Fundamentals of Plasma Physics, Cambridge University Press, 2006.10.1017/CBO9780511807183 ↗
23. L. Sorrentino and L. Carrino, “2024 aluminium alloy wettability and superficial cleaning improvement by air cold plasma treatment,” J. Mater. Process. Technol., vol. 209, no. 3, pp. 1400–1409, 2009, https://doi.org/10.1016/j.jmatprotec.2008.03.061.10.1016/j.jmatprotec.2008.03.061 ↗
24. A. Maroofi, N. Navab Safa, and H. Ghomi, “Atmospheric air plasma jet for improvement of paint adhesion to aluminium surface in industrial applications,” Int. J. Adhes. Adhes., vol. 98, 2020, Art. no. 102554, https://doi.org/10.1016/j.ijadhadh.2020.102554.10.1016/j.ijadhadh.2020.102554 ↗
25. A. Piel, Plasma Physics, Berlin, Heidelberg, Springer Berlin Heidelberg, 2010.
26. F. L. Tabarés, Plasma Applications for Material Modification, New York, Jenny Stanford Publishing, 2021.10.1201/9781003119203 ↗
27. Y. E. Nehri, A. Oral, and K. Çavdar, “Investigation of the effects of atmospheric pressure cold and hot plasma on the adhesive bond strength of Al 5049 and CFRP,” Mater. Res. Express, vol. 12, no. 7, pp. 0–17, 2025, https://doi.org/10.1088/2053-1591/adef9a.10.1088/2053-1591/adef9a ↗
28. C. Rodríguez-Villanueva, N. Encinas, J. Abenojar, and M. A. Martínez, “Assessment of atmospheric plasma treatment cleaning effect on steel surfaces,” Surf. Coatings Technol., vol. 236, pp. 450–456, 2013, https://doi.org/10.1016/j.surfcoat.2013.10.036.10.1016/j.surfcoat.2013.10.036 ↗
29. X. Shi, X. Zhang, and S. Xiu, “A research on the mechanism and model of surface micro-damage in grinding hardening,” Adv. Mech. Eng., vol. 13, no. 9, pp. 1–14, 2021, https://doi.org/10.1177/16878140211044958.10.1177/16878140211044958 ↗
30. F. B. Kilinc, E. Bozaci, A. C. Kilinc, and T. Turkoglu, “Effect of atmospheric plasma treatment on mechanical properties of 3D-printed continuous aramid fiber/PLA composites,” Polymers (Basel), vol. 17, no. 3, 2025, https://doi.org/10.3390/polym17030397.10.3390/polym17030397 ↗
31. M. Ç. Sarı, B. Kayhan, O. Kemah, E. A. Diler, and O. Ertuğrul, “Box-Behnken optimization of the atmospheric-pressure air plasma treatment on the bonding performance of aluminum 5754 joints,” Int. J. Adhes. Adhes., vol. 143, no. February, 2025, https://doi.org/10.1016/j.ijadhadh.2025.104150.10.1016/j.ijadhadh.2025.104150 ↗
32. Z. Jialiang, L. Jian, D. Ziyuan, L. Zhuoqin, X. Yonglin, and S. Xiaolong, “Multi-objective optimization of toughness and bonding strength in cement-based sealing materials using RSM coupled with NSGA-II hybrid approach: Performance evaluation and engineering application analysis,” Constr. Build. Mater., vol. 496, no. May, 2025, Art. no. 143808, https://doi.org/10.1016/j.conbuildmat.2025.143808.10.1016/j.conbuildmat.2025.143808 ↗
33. Y. Liu, Z. Gu, M. Sun, C. Guo, and X. Ding, “Machine learning-based fracture failure analysis and structural optimization of adhesive joints,” Appl. Sci., vol. 15, no. 16, pp. 1–18, 2025, https://doi.org/10.3390/app15169041.10.3390/app15169041 ↗
34. J. Ye, Y. Yan, J. Li, Y. Hong, and Z. Tian, “3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints,” Compos. Struct., vol. 201, no. August 2017, pp. 261–275, 2018, https://doi.org/10.1016/j.compstruct.2018.05.134.10.1016/j.compstruct.2018.05.134 ↗
35. J. A. Harris and R. A. Adams, “Strength prediction of bonded single lap joints by non-linear finite element methods,” Int. J. Adhes. Adhes., vol. 4, no. 2, pp. 65–78, 1984, https://doi.org/10.1016/0143-7496(84)90103-9.10.1016/0143-7496(84)90103-9 ↗
36. M. M. Abdel Wahab, I. A. Ashcroft, A. D. Crocombe, and S. J. Shaw, “Prediction of fatigue thresholds in adhesively bonded joints using damage mechanics and fracture mechanics,” J. Adhes. Sci. Technol., vol. 15, no. 7, pp. 763–781, 2001, https://doi.org/10.1163/15685610152540830.10.1163/15685610152540830 ↗
37. K. N. Anyfantis and N. G. Tsouvalis, “A 3D ductile constitutive mixed-mode model of cohesive elements for the finite element analysis of adhesive joints,” J. Adhes. Sci. Technol., vol. 27, no. 10, pp. 1146–1178, 2013, https://doi.org/10.1080/01694243.2012.735900.10.1080/01694243.2012.735900 ↗
38. H. Luo, Y. Yan, T. Zhang, and Z. Liang, “Progressive failure and experimental study of adhesively bonded composite single-lap joints subjected to axial tensile loads,” J. Adhes. Sci. Technol., vol. 30, no. 8, pp. 894–914, 2016, https://doi.org/10.1080/01694243.2015.1131806.10.1080/01694243.2015.1131806 ↗
39. J. Neumayer, H. Koerber, and R. Hinterhölzl, “An explicit cohesive element combining cohesive failure of the adhesive and delamination failure in composite bonded joints,” Compos. Struct., vol. 146, pp. 75–83, 2016, https://doi.org/10.1016/j.compstruct.2016.03.009.10.1016/j.compstruct.2016.03.009 ↗
40. M. Özer, K. Ferikel, İ. K. Yılmazçoban, T. K. Demircioğlu, F. Balikoglu, and C. Çivi, “Armox 500T zırh çeliği içeren hibrit zırh plakalarının 7.62 mm tam metal kaplama mermi karşısındaki balistik davranışının deneysel ve sayısal olarak araştırılması,” Karadeniz Fen Bilim. Derg., vol. 14, no. 3, pp. 1176–1191, 2024, https://doi.org/10.31466/kfbd.1444509.10.31466/kfbd.1444509 ↗
41. M. Özer, K. Ferikel, İ. K. Yılmazçoban, T. K. Demircioğlu, F. Balıkoğlu, and C. Çivi, “Hardox 450, aluminyum balpeteği ve aramid/epoxi tabakalı hibrit zırh plakalarının balistik davranışının incelenmesi,” Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilim. Derg., vol. 27, no. 4, pp. 1621–1632, https://doi.org/10.17780/ksujes.1489410, 2024.10.17780/ksujes.1489410 ↗
42. H. Pisavadia, G. Toussaint, P. Dolez, and J. D. Hogan, “Cohesive zone failure modeling of polymeric adhesives used in ceramic/metal armor,” Int. J. Impact Eng., vol. 170, no. January, 2022, Art. no. 104364, https://doi.org/10.1016/j.ijimpeng.2022.104364.10.1016/j.ijimpeng.2022.104364 ↗
43. S. R, A. Deb, and N. K. Gupta, “An experimental and numerical study on the behaviors of adhesively-bonded steel double-hat section components under axial impact loading,” Int. J. Impact Eng., vol. 179, no. April, 2023, Art. no. 104629, https://doi.org/10.1016/j.ijimpeng.2023.104629.10.1016/j.ijimpeng.2023.104629 ↗
44. Z. Li, W. Tian, S. Huang, Z. Chen, and Y. Wang, “Analysis and optimization of Cu/SiO2 hybrid bonding interfacial reliability based on FEA and GABP-NSGA Ⅱ algorithm,” Mater. Sci. Semicond. Process., vol. 198, no. June, 2025, Art. no. 109782, https://doi.org/10.1016/j.mssp.2025.109782.10.1016/j.mssp.2025.109782 ↗
45. A. Morales-Hernández et al.., “Constrained multi-objective optimization of process design parameters in settings with scarce data: An application to adhesive bonding,” Eng. Comput., vol. 40, no. 4, pp. 2497–2511, 2023, https://doi.org/10.1007/s00366-023-01922-8.10.1007/s00366-023-01922-8 ↗
46. E. Valdés, J. D. Mosquera-Artamonov, C. Cruz-Gonzalez, and J. Jaime Taha-Tijerina, “Multiobjective optimization on adhesive bonding of aluminum-carbon fiber laminate,” Comput. Intell., vol. 37, no. 1, pp. 621–634, 2021, https://doi.org/10.1111/coin.12432.10.1111/coin.12432 ↗
47. İ. Sönmez, K. Ayas, M. Dal, and K. Çavdar, “Atmosferik basınçlı soğuk plazma uygulamasının farklı malzemelerin yapışma dayanımına etkisi,” Balıkesir Üniversitesi Fen Bilim. Enstitüsü Derg., vol. 25, no. 1, pp. 137–149, 2023, https://doi.org/10.25092/baunfbed.1151784.10.25092/baunfbed.1151784 ↗
48. M. Turgut and K. Çavdar, “Atmosferik plazma işlemi kullanılarak farklı kauçuk ve nonwoven malzemelerin yapışma davranışının iyileştirilmesi,” Uludağ Univ. J. Fac. Eng., no. 17, pp. 289–302, 2020, https://doi.org/10.17482/uumfd.562784.10.17482/uumfd.562784 ↗
49. H. Güler, K. Ayas, and K. Çavdar, “Atmosferik basınç plazma uygulamasının POM ve PP malzemelerin yapıştırma bağı dayanımına etkisinin araştırılması,” Gazi Üniversitesi Mühendislik Mimar. Fakültesi Derg., vol. 38, no. 3, pp. 1577–1588, 2023, https://doi.org/10.17341/gazimmfd.1035264.10.17341/gazimmfd.1035264 ↗
50. Ö. Kanbir, E. Taşyakan, and K. Çavdar, “Metal malzeme yüzeylerinin yapıştırma işlemlerinde atmosferik basınçlı plazma uygulamasının etkisi,” Gazi Üniversitesi Mühendislik Mimar. Fakültesi Derg., vol. 38, no. 2, pp. 665–678, 2022, https://doi.org/10.17341/gazimmfd.1025228.10.17341/gazimmfd.1025228 ↗
51. D.-C. Tsai, Z.-C. Chang, E.-C. Chen, Y.-L. Huang, Y.-C. Jiang, and F.-S. Shieu, “Influence of plasma treatment on surface characteristics of aluminum alloy sheets and bonding performance of glass fiber-reinforced thermoplastic/Al composites,” Materials, vol. 16, no. 9, p. 3317, 2023, https://doi.org/10.3390/ma16093317.10.3390/ma16093317 ↗
52. E. C. Preedy, E. Brousseau, S. L. Evans, S. Perni, and P. Prokopovich, “Adhesive forces and surface properties of cold gas plasma treated UHMWPE,” Colloids Surfaces A Physicochem. Eng. Asp., vol. 460, pp. 83–89, 2014, https://doi.org/10.1016/j.colsurfa.2014.03.052.10.1016/j.colsurfa.2014.03.052 ↗
53. N. Saleema and D. Gallant, “Atmospheric pressure plasma oxidation of AA6061-T6 aluminum alloy surface for strong and durable adhesive bonding applications,” Appl. Surf. Sci., vol. 282, pp. 98–104, 2013, https://doi.org/10.1016/j.apsusc.2013.05.064.10.1016/j.apsusc.2013.05.064 ↗
54. J. H. Ku, I. H. Jung, K. Y. Rhee, and S. J. Park, “Atmospheric pressure plasma treatment of polypropylene to improve the bonding strength of polypropylene/aluminum composites,” Compos. Part B Eng., vol. 45, no. 1, pp. 1282–1287, 2013, https://doi.org/10.1016/j.compositesb.2012.06.016.10.1016/j.compositesb.2012.06.016 ↗
55. J.-S. Kim, Y.-K. Kim, and K.-H. Lee, “Effects of atmospheric plasma treatment on the interfacial characteristics of ethylene–vinyl acetate/polyurethane composites,” J. Colloid Interface Sci., vol. 271, no. 1, pp. 187–191, 2004, https://doi.org/10.1016/j.jcis.2003.10.013.10.1016/j.jcis.2003.10.013 ↗
56. L. Carrino, W. Polini, and L. Sorrentino, “Adhesion of polypropylene surfaces treated by cold plasma,” SAE Trans., vol. 111, pp. 949–957, 2002, https://doi.org/10.4271/2002-01-2103.10.4271/2002-01-2103 ↗
57. S. G. Esen, E. Altuncu, F. Üstel, and S. Akpınar, “Atmosferik plazma yüzey aktivasyon işlemi ile farklı yüzey tarama hızlarının polipropilen yüzey ıslatma özelliklerine etkisi,” Sak. Üniversitesi Fen Bilim. Enstitüsü Derg., vol. 20, no. 2, pp. 307–316, https://doi.org/10.16984/saufenbilder.85668, 2016.10.16984/saufenbilder.85668 ↗
58. FCB ARGE, FCB ARGE piezobrush® PZ3, fcb-arge.com. [Online]. Available at: https://www.fcb-arge.com/piezobrushPZ-3.html [Accessed: Sept. 16, 2024].
59. R. R. Deshmukh and N. V. Bhat, “Pretreatments of textiles prior to dyeing: Plasma processing,” Text. Dyeing, InTech, 2011, https://doi.org/10.5772/19295.10.5772/19295 ↗
60. S. Cinar Cagan and B. Baris Buldum, “Effects of ball burnishing on the surface quality of Al 7075 alloy,” Mater. Test., vol. 61, no. 11, pp. 1105–1108, 2019, https://doi.org/10.3139/120.111428.10.3139/120.111428 ↗
61. A. Rabl, M. Stummer, M. Pfund, and N. Enzinger, “Surface treatment for effective bonding in the sports industry,” Mater. Test., vol. 60, no. 2, pp. 128–133, 2018, https://doi.org/10.3139/120.111132.10.3139/120.111132 ↗
62. Ö. Kanbir, K. Ayas, and K. Çavdar, “Effect of atmospheric pressure plasma treatment on the wettability and aging behavior of metal surfaces,” Mater. Test., vol. 67, no. 5, pp. 875–883, 2025, https://doi.org/10.1515/mt-2024-0480.10.1515/mt-2024-0480 ↗
63. T. Belytschko, W. K. Liu, B. Moran, and K. Elkhodary, Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, 2014.
64. D. P. Flanagan and T. Belytschko, “A uniform strain hexahedron and quadrilateral with orthogonal hourglass control,” Int. J. Numer. Methods Eng., vol. 17, no. 5, pp. 679–706, 1981, https://doi.org/10.1002/nme.1620170504.10.1002/nme.1620170504 ↗
65. D. J. Elder, A. H. Verdaasdonk, and R. S. Thomson, “Fastener pull-through in a carbon fibre epoxy composite joint,” Compos. Struct., vol. 86, nos. 1–3, pp. 291–298, 2008, https://doi.org/10.1016/j.compstruct.2008.03.041.10.1016/j.compstruct.2008.03.041 ↗
66. T. T. Allen, Introduction to Engineering Statistics and Lean Sigma, London, Springer London, 2010.10.1007/978-1-84996-000-7 ↗
67. W. A. Jensen, “Response surface methodology: Process and product optimization using designed experiments 4th edition,” J. Qual. Technol., vol. 49, no. 2, pp. 186–188, 2017, https://doi.org/10.1080/00224065.2017.11917988.10.1080/00224065.2017.11917988 ↗
68. M. Noeske, J. Degenhardt, S. Strudthoff, and U. Lommatzsch, “Plasma jet treatment of five polymers at atmospheric pressure: Surface modifications and the relevance for adhesion,” Int. J. Adhes. Adhes., vol. 24, no. 2, pp. 171–177, 2004, https://doi.org/10.1016/j.ijadhadh.2003.09.006.10.1016/j.ijadhadh.2003.09.006 ↗
69. A. I. Khuri and S. Mukhopadhyay, “Response surface methodology,” WIREs Comput. Stat., vol. 2, no. 2, pp. 128–149, 2010, https://doi.org/10.1002/wics.73.10.1002/wics.73 ↗
70. K. G. Kostov, T. M. C. Nishime, A. H. R. Castro, A. Toth, and L. R. O. Hein, “Surface modification of polymeric materials by cold atmospheric plasma jet,” Appl. Surf. Sci., vol. 314, pp. 367–375, 2014, https://doi.org/10.1016/j.apsusc.2014.07.009.10.1016/j.apsusc.2014.07.009 ↗
71. O. Völkerink, “Simulation-Driven Design of Bonded Joints in Fibre Composite Aircraft Structures Using Progressive Damage Analyses,” Doctoral dissertation, Technische Universität Carolo-Wilhelmina zu Braunschweig, 2022. [Online].
72. F. H. Öztürk, E. A. S. Marques, R. J. C. Carbas, and L. F. M. da Silva, “Experimental and numerical study on mechanical behavior of 3D printed adhesive joints with polycarbonate substrates,” J. Appl. Polym. Sci., vol. 141, no. 29, pp. 1–18, 2024, https://doi.org/10.1002/app.55657.10.1002/app.55657 ↗
73. E. Kurt, A. R. Yıldız, T. İnkaya, A. R. Özcan, and İ. Gökdağ, “Lightweight design of lattice-embedded brake pedals using artificial intelligence -based optimization,” Mater. Test., vol. 68, no. 1, pp. 83–95, 2026, https://doi.org/10.1515/mt-2025-0390.10.1515/mt-2025-0390 ↗
74. J. Wang, Z. Yu, S. Yang, Z. Wang, R. Ren, and X. Xiong, “Effects of argon plasma treatment on carbon fiber surface characteric and its reinforcing polyimide composites interfacial properties at room and elevated temperatures,” Diam. Relat. Mater., vol. 151, no. October 2024, 2025, Art. no. 111765, https://doi.org/10.1016/j.diamond.2024.111765.10.1016/j.diamond.2024.111765 ↗
75. S. S. Palaskar, R. D. Kale, and R. R. Deshmukh, “Application of atmospheric pressure plasma for adhesion improvement in polyurethane coating on polypropylene fabrics,” J. Coatings Technol. Res., vol. 17, no. 2, pp. 485–501, 2020, https://doi.org/10.1007/s11998-019-00300-8.10.1007/s11998-019-00300-8 ↗