journal article·2024-06-25

Mechanical behavior of carbon nanotubes reinforced polymer

Hassan S. Hedia, Majid A. Almas, Hassan M. Attar, Faisal Al Thobiani, Mona A. Soliman, Mohammed H. Hedia

Materials Testing· Volume 66· Issue 6
Publisher page

Abstract

Abstract Carbon nanotubes (CNTs) have garnered significant attention due to their extraordinary mechanical and other physical characteristics. This study demonstrates that incorporating a small number of carbon nanotubes, ranging from 0.1 to 0.9 wt.%, into a polymer, can effectively enhance its mechanical properties. In comparison to the pure polymer, the addition of −0.3 % carbon nanotubes resulted in a notable 24.1 % increase in tensile strength, a 4.4 % increase in compressive strength, a significant 319.5 % increase in the fatigue life cycle at 0.1 % carbon nanotubes, and a remarkable 43.0 % increase in fracture toughness at 0.3 wt.% carbon nanotubes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Nanotechnology research and applications · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Marine Engineering , King Abdulaziz University , Jeddah , Saudi Arabia

Department of Production and Mechanical Design Engineering , Delta Higher Institute for Engineering and Technology , Talkha , Egypt

Structural Engineering Dept. , Mansoura University , Mansoura , Egypt

Funding

Deanship of Scientific Research (DSR), King Abdulaziz University

References (17)

Show source-provided references
1. C. L. Wu, M. Q. Zhang, M. Z. Rong, and K. Friedrich, “Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites,” Compos. Sci. Technol., vol. 65, no. 3–4, pp. 635–645, 2005. https://doi.org/10.1016/j.compscitech.2004.09.004.10.1016/j.compscitech.2004.09.004 ↗
2. N. Chisholm, H. Mahfuz, V. K. Rangari, A. Ashfaq, and S. Jeelani, “Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites,” Compos. Struct., vol. 67, no. 1, pp. 115–124, 2005. https://doi.org/10.1016/j.compstruct.2004.01.010.10.1016/j.compstruct.2004.01.010 ↗
3. H. Mahfuz, A. Adnan, V. K. Rangari, S. Jeelani, and B. Z. Jang, “Carbon nanoparticles/whiskers reinforced composites and their tensile response,” J. Compos. Part A, vol. 35, no. 5, pp. 519–527, 2004. https://doi.org/10.1016/j.compositesa.2004.02.002.10.1016/j.compositesa.2004.02.002 ↗
4. C. Lei Wu, M. Qiu Zhang, M. Zhi Rong, and K. Friedrich, “Tensile performance improvement of low nanoparticles filled-polypropylene composites,” Compos. Sci. Technol., vol. 62, no. 10–11, pp. 1327–1340, 2002. https://doi.org/10.1016/S0266-3538(02)00079-9.10.1016/S0266-3538(02)00079-9 ↗
5. M. Hussain, A. Nakahira, S. Nishijima, and K. Niihara, “Evaluation of mechanical behavior of CFRC transverse to the fiber direction at room and cryogenic temperature,” Compos. Part A, vol. 31, no. 2, pp. 173–179, 2000, https://doi.org/10.1016/S1359-835X(99)00060-3.10.1016/S1359-835X(99)00060-3 ↗
6. C. N. He and F. Tian, “A carbon nanotube-alumina network structure for fabricating epoxy composites,” Scr. Mater., vol. 61, no. 3, pp. 285–288, 2009. https://doi.org/10.1016/j.scriptamat.2009.04.003.10.1016/j.scriptamat.2009.04.003 ↗
7. N. Yu, S. Y. He, and Z. H. Zhang, “Fracture toughness and fatigue life of MWCNT/epoxy composites,” Mater. Sci. Eng., vol. 494, no. 1–2, pp. 380–384, 2008. https://doi.org/10.1016/j.msea.2008.04.051.10.1016/j.msea.2008.04.051 ↗
8. S. R. Bakshi, J. E. Tercero, and A. Agarwal, “Synthesis and characterization of multiwalled carbon nanotube reinforced ultra-high molecular weight polyethylene composite by electrostatic spraying technique,” Compos. Part A Appl. Sci. Manuf., vol. 38, no. 8, pp. 2493–2499, 2007. https://doi.org/10.1016/j.compositesa.2007.08.004.10.1016/j.compositesa.2007.08.004 ↗
9. B. Fiedler, F. H. Gojny, M. H. G. Wichmann, M. C. M. Nolte, and K. Schulte, “Fundamental aspects of nano-reinforced composites,” Compos. Sci. Technol., vol. 66, no. 16, pp. 3115–3125, 2006. https://doi.org/10.1016/j.compscitech.2005.01.014.10.1016/j.compscitech.2005.01.014 ↗
10. H. S. Hedia, L. Allie, S. Ganguli, and H. Aglan, “The influence of nanoadhesives on the tensile properties and Mode-I fracture toughness of bonded joints,” Eng. Fract. Mech., vol. 73, no. 13, pp. 1826–1832, 2006. https://doi.org/10.1016/j.engfracmech.2006.02.013.10.1016/j.engfracmech.2006.02.013 ↗
11. S. M. Aldosari, H. S. Hedia, M. A. Hamed, and U. A. Khashaba, “Design, manufacture and analysis of composite epoxy material with embedded silicon carbide (SiC) and alumina (Al2O3) Nanoparticles/fibers,” Mater. Test., vol. 57, no. 1, pp. 72–84, 2015, https://doi.org/10.3139/120.110672.10.3139/120.110672 ↗
12. S. M. Aldosari, U. A. Khashaba, M. A. Hamed, and H. S. Hedia, “Design, manufacture and analysis of composite epoxy material with embedded MWCNT fibers,” Materialprüfung, vol. 56, no. 11–12, pp. 1042–1048, 2014, https://doi.org/10.3139/120.110668.10.3139/120.110668 ↗
13. H. S. Hedia, S. M. Aldousari, A. K. Abdellatif, and G. S. Abdelhaffez, “Prediction of the elastic modulus of SWCNT/Epoxy composite based on the micromechanics,” Mater. Test., vol. 57, no. 7–8, pp. 690–696, 2015, https://doi.org/10.3139/120.110754.10.3139/120.110754 ↗
14. S. M. Aldousari, H. S. Hedia, F. W. Al-Thobaini, and N. Fouda, “Influence of different types of nanomaterial’s on the mechanical properties of epoxy matrix composites,” Mater. Test., vol. 60, no. 6, pp. 639–646, 2018, https://doi.org/10.3139/120.111199.10.3139/120.111199 ↗
15. H. S. Hedia, L. Allie, S. Ganguli, and H. Aglan, “Improvement of the tensile properties and mode I fracture toughness of bonded joints using nanoadhesives,” J. Materialprüfung (Mater. Test.), vol. 48, no. 5, pp. 234–238, 2006, https://doi.org/10.3139/120.100731.10.3139/120.100731 ↗
16. Ö. F. Erkendirci and A. Avcı‏, “Effects of nanomaterials on the mechanical properties of epoxy hybrid composites,” SN Appl. Sci., vol. 2, no. 826, p. 826, 2020. https://doi.org/10.1007/s42452-020-2663-x.10.1007/s42452-020-2663-x ↗
17. M. A. G. Benega, W. M. Silva, M. C. Schnitzler, R. J. E. Andrade, and H. Ribeiro, “Improvements in thermal and mechanical properties of composites based on epoxy-carbon nanomaterials – a brief landscape,” Polym. Test., vol. 98, no. 107180, pp. 1–13, 2021. https://doi.org/10.1016/j.polymertesting.2021.107180.10.1016/j.polymertesting.2021.107180 ↗