journal article·2024-06-25

Operational wear behaviour of 3D-printed lightweight metal gears: EDS and oil analysis comparison

Tugce Tezel, Ulrich Schultheiss, Helga Hornberger, Volkan Kovan

Materials Testing· Volume 66· Issue 6
Publisher page

Abstract

Abstract Additive manufacturing (AM) has come to the fore in recent years among manufacturing techniques. This technique, which has different advantages than traditional ones such as casting, forging and machining, is expected to be widely used in producing machine parts like gears in the coming years. Therefore, experimental data on AM parameters for lightweight metal gears are important for industrial production. In this study, a wear test was applied to AlSi10Mg and Ti6Al4V gears under operational conditions, and the wear behaviour of conventionally and additively manufactured gears was compared. The amount of abrasion elements was determined by analysing the oil in the gearbox. In addition, gear surfaces were analysed using scanning electron microscopy and an energy-dispersive spectrometer before and after wear. Thus, the wear behaviour of gears produced by conventional and AM under service conditions was demonstrated comparatively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

37502 Akdeniz University , Antalya , Türkiye

84614 OTH Regensburg , Regensburg , Bayern , Germany

References (15)

Show source-provided references
1. B. Chen, T. Wang, X. Xi, C. Tan, and X. Song, “Additive manufacturing of Ti-Al functionally graded material by laser based directed energy deposition,” Rapid Prototyp. J., vol. 29, no. 3, pp. 558–568, 2023, https://doi.org/10.1108/RPJ-04-2022-0117.10.1108/RPJ-04-2022-0117 ↗
2. I. Gokdag and E. Acar, “Effects of process parameters on strengthening mechanisms of additively manufactured AlSi10Mg,” Mater. Test., vol. 65, no. 3, pp. 409–422, 2023, https://doi.org/10.1515/mt-2022-0449.10.1515/mt-2022-0449 ↗
3. B. Atar, E. Uyuklu, and P. Yayla, “Microstructure and mechanical properties of an additively manufactured AlSi10Mg based alloy,” Mater. Test., vol. 65, no. 6, pp. 874–885, 2023, https://doi.org/10.1515/mt-2022-0334.10.1515/mt-2022-0334 ↗
4. A. Riemer, S. Leuders, H. A. Richard, and T. Tröster, “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung,” Mater. Test., vol. 55, nos. 7–8, pp. 537–543, 2013, https://doi.org/10.3139/120.110468.10.3139/120.110468 ↗
5. L. N. Cristian, et al.., “Study of improving spur gears with the generative design method,” in Towards Industry 5.0, N. M. Durakbasa, and M. G. Gençyılmaz, Eds., Cham, Germany, Springer, 2023, pp. 473–485.10.1007/978-3-031-24457-5_38 ↗
6. Z. Mehdiyev and C. Felho, “Investigation on 3D printing parameters of PLA polymers for gear applications,” in Vehicle and Automotive Engineering 4, K. Jarmai, and A. Cservenak, Eds., Cham, Germany, Springer, 2023, pp. 654–664.10.1007/978-3-031-15211-5_55 ↗
7. A. J. Muminovic, N. Pervan, M. Delic, E. Muratovic, E. Mesic, and S. Braut, “Failure analysis of nylon gears made by additive manufacturing,” Eng. Fail. Anal., vol. 137, pp. 106272, 2022, https://doi.org/10.1016/j.engfailanal.2022.106272.10.1016/j.engfailanal.2022.106272 ↗
8. A. Kalani, J. Vadher, S. Sharma, and R. Jani, “Investigation of thermal and wear behaviour of 3D printed PA-12 nylon polymer spur gears,” El-Cezeri J Sci Eng., vol. 9, no. 3, pp. 1121–1135, 2022, https://doi.org/10.31202/ecjse.1085328.10.31202/ecjse.1085328 ↗
9. L. H. Nguyen and K. T. Nguyen, “Lightweight plastic gear body using gyroid structure for additive manufacturing,” J. Mach. Eng., vol. 22, no. 4, pp. 21–42, 2022, https://doi.org/10.36897/jme/157077.10.36897/jme/157077 ↗
10. S. Konala, I. Crawford, O. Harrysson, M. Stolpe, and P. Czer, “Additive manufacturing of strain wave gears in 17-4 PH stainless steel,” in ASPE and Euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing, Knoxville, Tennessee, USA, ASPE, American Society for Precision Engineering, 2022, pp. 251–254.
11. F. Concli, et al.., “Bending fatigue behavior of 17-4 PH gears produced by additive manufacturing,” Appl. Sci., vol. 11, no. 71, pp. 3019, 2021, https://doi.org/10.3390/app11073019.10.3390/app11073019 ↗
12. B. Yang, J. Cho, X. L. Phuah, H. Wang, X. Zhang, “Flash sintering of additively manufactured 3YSZ gears,” J. Am.Ceram., vol. 104, no. 8, pp. 3828–3832, 2021, https://doi.org/10.1111/jace.17835.10.1111/jace.17835 ↗
13. C. C. Kuo, D. Y. Li, Z. C. Lin, and Z. F. Kang, “Characterizations of polymer gears fabricated by differential pressure vacuum casting and fused deposition modeling,” Polymers, vol. 13, no. 23, pp. 4126, 2021, https://doi.org/10.3390/polym13234126.10.3390/polym13234126 ↗
14. T. Tezel, E. S. Topal, and V. Kovan, “Characterising the wear behaviour of DMLS-manufactured gears under certain operating conditions,” Wear, vols. 440–441, pp. 203106, 2019, https://doi.org/10.1016/j.wear.2019.203106.10.1016/j.wear.2019.203106 ↗
15. T. Tezel, E. S. Topal, and V. Kovan, “Failure analysis of 3D-printed steel gears,” Eng. Fail. Anal., vol. 110, pp. 104411, 2020, https://doi.org/10.1016/j.engfailanal.2020.104411.10.1016/j.engfailanal.2020.104411 ↗