journal article·2019-06-01

Tribological behavior of a hydrostatically extruded ultra-fine grained Ti-13Nb-13Zr alloy

Aslı Gunay Bulutsuz, Mehmet Emin Yurci, Kadir Ozaltin, Witold Chrominski, Malgorzata Lewandowska

Materials Testing· Volume 61· Issue 6
Publisher page

Abstract

Abstract This contribution summarizes the results an investigation of the wear resistance of as received initial state and nano-structured Ti-13Nb-13Zr alloy obtained by hydrostatic extrusion. The tribological behavior was examined using a ball-on-disc tribometer under unlubricated sliding contact conditions against an Al2O3 ceramic ball. Friction coefficient, material transfer and wear debris of the samples were observed after the wear tests. Wear characteristics of the samples were investigated by means of an optical profilometer, mechanical profilometer and scanning electron microscope for wear debris morphology and wear tracks. Although friction coefficients are very similar according to tribological observations, the domestic distribution of wear characteristics varied for samples of various grain sizes. Morphological observations have shown that surface responses to abrasive ceramic balls involve localized long and short wear debris, fracture, surface plowing causing adhesive wear and the formation of larger surface debris, and material transfer between titanium and the ceramic counterpart.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Istanbul , Turkey

Warsaw , Poland

References (31)

Show source-provided references
1. Titanium-based biomaterials for preventing stress shielding between implant devices and bone10.1155/2011/836587 ↗
2. α’ Type Ti-Nb-Zr alloys with ultra-low Young's modulus and high strength10.1016/j.pnsc.2013.11.005 ↗
3. Theoretical study of the effects of alloying elements on the strength and modulus of β-type bio-titanium alloys10.1016/S0921-5093(98)00886-7 ↗
4. Recent research and development in titanium alloys for biomedical applications and healthcare goods10.1016/j.stam.2003.09.002 ↗
5. AFM and SEM characterization of non-toxic vanadium-free Ti alloys used as biomaterials10.1016/S0169-4332(03)00746-3 ↗
6. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
7. Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation10.1016/j.actbio.2007.09.009 ↗
8. Elastic softening of β-type Ti-Nb alloys by indium (In) additions10.1016/j.jmbbm.2014.07.010 ↗
9. Zr-Ti-Nb porous alloys for biomedical application10.1016/j.msec.2011.10.035 ↗
10. Titanium alloys in total joint replacement – A materials science perspective10.1016/s0142-9612(97)00146-4 ↗
11. The tribological properties of nano-titanium obtained by hydrostatic extrusion10.1016/j.wear.2006.11.047 ↗
12. A Two Step SPD Processing of Ultrafine-Grained Titanium10.1016/S0965-9773(99)00384-0 ↗
13. Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
14. Extreme grain refinement by severe plastic deformation: A wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
15. Tribological behaviour of near β titanium alloy as a function of α β β solution treatment temperature10.1016/j.matdes.2013.03.107 ↗
16. Friction and surface behavior of selected titanium alloys during reciprocating-sliding motion10.1016/S0043-1648(01)00517-8 ↗
17. Use of optical profilometry in the ASTM D4172 standard10.1016/j.wear.2011.06.016 ↗
18. Reduction of friction coefficient of ultrafine-grained CP titanium10.1016/j.msea.2003.12.026 ↗
19. Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation10.1016/j.actamat.2005.07.031 ↗
20. Comparison between methods for measuring wear in brake friction materials10.1016/j.wear.2014.08.004 ↗
21. Minimizing tribolayer damage by strength-ductility matching in dual-scale structured Al-Sn alloys: A mechanism for improving wear performance10.1016/j.wear.2013.05.001 ↗
22. Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion10.1016/j.msea.2009.03.054 ↗
23. Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion10.1016/j.wear.2012.01.012 ↗
24. Wear behavior of an aluminum alloy processed by equal-channel angular pressing10.1007/s10853-010-4862-0 ↗
25. Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid10.1016/j.msec.2012.01.022 ↗
27. Effect of different surface oxidation treatments on structural, mechanical and tribological properties of ultrafine-grained titanium10.1016/j.surfcoat.2014.07.073 ↗
28. Tribological properties of titanium alloys10.1016/0043-1648(91)90249-T ↗
29. The fundamentals of nanostructured materials processed by severe plastic deformation, The Journal of The Minerals10.1007/s11837-004-0294-0 ↗
30. Grain refining performance for Al and Al-Si alloy casts by addition of equal-channel angular pressed Al-5 mass % Ti alloy10.1016/j.msea.2006.03.018 ↗
31. Reciprocating-sliding wear behavior of nanostructured and ultra-fine high-silicon bainitic steels10.1016/j.wear.2015.06.011 ↗