Surface roughness analysis of greater cutting depths during hard turning
Source abstract
Abstract
Abstract Literally, hard machining describes machining of parts having hardness over 45 HRC. Besides its advantages like high metal removal rate, easiness of adapting to complex part geometries, possibility of dry cutting; this operation, which can substitute grinding in most cases, has some disadvantages. One of them is the significant increase of surface roughness due to tool wear even when the tool life limit is not exceeded. In this study, considering hard turning praxes, higher depths of cut (0.5 to 1.0 mm) were examined when dry turning AISI D2 cold work tool steel, through-hardened to 62 HRC. TiN coated mixed ceramic inserts (Al2O3 + TiCN) were employed in the operations. Relationship between surface roughness and cutting parameters (cutting speed, feed and depth of cut) was modeled and analyzed using a Box-Behnken response surface methodology (RSM) design. A linear model best described this relationship. Despite the higher depths of cuts, the surface roughness values achieved were comparable to those in grinding operations. Finally, the optimal values of cutting parameters for minimum surface roughness were predicted.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bursa
Balikesir
Bursa , Turkey
References (32)
Show source-provided references
1. 2014
2. 2011
3. Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools10.1016/j.wear.2007.11.001 ↗
4. Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts10.1016/j.ijrmhm.2008.12.007 ↗
5. Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology10.1007/s00170-014-5950-0 ↗
6. Empirical modeling of hard turning of AISI 6150 steel using design and analysis of computer experiments10.1007/s11740-010-0208-7 ↗
7. State of the art in hard turning10.1016/j.ijmachtools.2011.08.019 ↗
8. Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)10.1016/j.asoc.2015.01.059 ↗
9. On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations10.1016/j.measurement.2012.12.016 ↗
10. Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material10.1016/j.jmatprotec.2008.01.050 ↗
11. Optimization of surface integrity in dry hard turning using RSM10.1007/s12046-014-0263-4 ↗
12. Surface integrity in hard machining of 300M steel: Effect of cutting-edge geometry on machining induced residual stresses10.1016/j.procir.2014.04.049 ↗
13. Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part II (RSM, grey relational and techno economical approach)10.1016/j.measurement.2012.09.023 ↗
14. Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel10.1016/j.jmatprotec.2007.12.018 ↗
15. Analysis of machinability during hard turning of cold work tool steel (type: AISI D2)10.1080/10426910902997415 ↗
16. Analysis of tool wear and surface finish in hard turning10.1007/s00170-004-2411-1 ↗
17. Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel10.1016/j.jmatprotec.2009.02.011 ↗
18. Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3)10.1080/10910344.2010.533621 ↗
19. A surface roughness prediction model for hard turning process10.1007/s00170-006-0429-2 ↗
20. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques10.1016/j.matdes.2006.01.011 ↗
21. Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization10.1016/j.measurement.2011.11.011 ↗
22. Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL10.1016/j.jclepro.2013.08.040 ↗
23. 1996
24. Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method10.1016/j.measurement.2011.07.003 ↗
25. Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis10.1016/j.measurement.2014.09.025 ↗
26. Experimental investigation and surface roughness analysis on hard turning of AISI D2 steel using coated carbide insert10.1016/j.proeng.2014.12.226 ↗
27. Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part I (An experimental approach)10.1016/j.measurement.2013.03.024 ↗
28. 1997
29. 2005
30. 2001
31. 2010
32. 2001