journal article·2023-04-25

Optimization of friction stir welding process parameters using multi-criteria decision making approach

Mustafa Ay, Furkan Sarsılmaz

Materials Testing· Volume 65· Issue 4
Publisher page

Abstract

Abstract In this study, two different aluminum alloy (AA1030/AA7075) pairs were joined using friction stir welding (FSW) method. Tool rotation speed, welding speed, and stirrer geometry were chosen as variable welding parameters. The welded joint zones were evaluated for both microstructural and mechanical properties such as ultimate tensile strength (UTS) and nugget hardness (H). Optimum welding parameters were determined using multi-criteria decision making techniques such as rank preference technique by similarity to ideal solution (TOPSIS) and gray relational analysis (GRA). At the same time, the performances of the TOPSIS and GRA methods were compared.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechatronics Engineering , Firat Universitesi , Elazig 23119 , Türkiye

Mechatronics , Firat Universitesi , Elazig , Türkiye

References (21)

Show source-provided references
1. C. Rajendran, K. Srinivasan, V. Balasubramanian, T. Sonar, and H. Balaji, “Determination of readiness for laying based on material moisture, corresponding relative humidity, and water release,” Mater. Test., vol. 64, no. 12, pp. 1782–1795, 2022, https://doi.org/10.1515/mt-2022-0165.10.1515/mt-2022-0165 ↗
2. B. Parida and S. Pal, “Fuzzy assisted grey Taguchi approach for optimisation of multiple weld quality properties in friction stir welding process,” Sci. Technol. Weld. Join., vol. 20, no. 1, pp. 35–41, 2015, https://doi.org/10.1179/1362171814Y.0000000251.10.1179/1362171814Y.0000000251 ↗
3. P. K. Sahu, K. Kumari, S. Pal, and S. K. Pal, “Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints,” Adv. Manuf., vol. 4, pp. 237–247, 2016, https://doi.org/10.1007/s40436-016-0151-8.10.1007/s40436-016-0151-8 ↗
4. K. K. Babu, K. Panneerselvam, P. Sathiya, et al.., “Parameter optimization of friction stir welding of cryorolled AA2219 alloy using artificial neural network modeling with genetic algorithm,” Int. J. Adv. Manuf. Technol., vol. 94, pp. 3117–3129, 2018, https://doi.org/10.1007/s00170-017-0897-6.10.1007/s00170-017-0897-6 ↗
5. F. Sarsılmaz and G. Kavuran, “Prediction of the optimal FSW process parameters for joints using machine learning techniques,” Mater. Test., vol. 63, no. 12, pp. 1104–1111, 2021, https://doi.org/10.1515/mt-2021-0058.10.1515/mt-2021-0058 ↗
6. S. Vijayan, R. Raju, K. Subbaiah, N. Sridhar, and S. R. K. Rao, “Friction stir welding of AleMg alloy optimization of process parameters using Taguchi method,” J. Mater. Process. Technol., vol. 34, no. 5, pp. 37–44, 2009, https://doi.org/10.1016/j.jmapro.2017.03.012.10.1111/j.1747-1567.2009.00563.x ↗
7. A. Khalkhali, M. Sarmadi, and E. Sarikhani, “Investigation on the best process criteria for lap joint friction stir welding of AA1100 aluminum alloy via TAGUCHI technique and ANOVA,” Proc. Inst. Mech. Eng., vol. 231, no. 2, pp. 329–342, 2017, https://doi.org/10.1177/0954408916665651.10.1177/0954408916665651 ↗
8. M. H. Shojaeefard, M. Akbari, A. Khalkhali, P. Asadi, and A. H. Parivar, “Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method,” Mater. Des., vol. 64, pp. 660–666, 2014, https://doi.org/10.1016/j.matdes.2014.08.014.10.1016/j.matdes.2014.08.014 ↗
9. N. Sabarirajan and A. N. Sait, “Optimization and thermal analysis of friction stir welding of AA 6061-AA 8011 joints,” Mater. Test., vol. 62, no. 3, pp. 317–328, 2020, https://doi.org/10.3139/120.111473.10.3139/120.111473 ↗
10. A. Ülker, S. Sayar, and V. Ceyhun, “Welding parameters and joint strength optimization during friction stir welding of high density polyethylene (HDPE) using the Taguchi method,” Mater. Test., vol. 58, no. 5, pp. 423–432, 2016, https://doi.org/10.3139/120.110874.10.3139/120.110874 ↗
11. Y. Kuo, T. Yang, and G. W. Huang, “The use of grey relational analysis in solving multiple attribute decision-making problems,” Comput. Ind. Eng., vol. 55, no. 1, pp. 80–93, 2008, https://doi.org/10.1016/j.cie.2007.12.002.10.1016/j.cie.2007.12.002 ↗
12. S. Ramesh, R. Viswanathan, and S. Ambika, “Measurement and optimization of surface roughness and tool wear via grey relational analysis, TOPSIS and RSA techniques,” Measurement, vol. 78, pp. 63–72, 2016, https://doi.org/10.1016/j.measurement.2015.09.036.10.1016/j.measurement.2015.09.036 ↗
13. Y. Bozkurt, “The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets,” Mater. Des., vol. 35, pp. 440–445, 2012, https://doi.org/10.1016/j.matdes.2011.09.008.10.1016/j.matdes.2011.09.008 ↗
14. M. J. Tsai and C. H. Li, “The use of grey relational analysis to determine laser cutting parameters for QFN packages with multiple performance characteristics,” Opt. Laser Technol., vol. 41, pp. 914–921, 2009, https://doi.org/10.1016/j.optlastec.2009.03.006.10.1016/j.optlastec.2009.03.006 ↗
15. M. Behzadian, S. K. Otaghsara, M. Yazdani, and J. Ignatius, “A state-of the-art survey of TOPSIS applications,” Expert Syst. Appl., vol. 39, no. 17, pp. 13051–13069, 2012, https://doi.org/10.1016/j.eswa.2012.05.056.10.1016/j.eswa.2012.05.056 ↗
16. H. Fujii, L. Cui, M. Maeda, and K. Nogi, “Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys,” Mater. Sci. Eng., A, vol. 416, no. 2, pp. 25–31, 2000, https://doi.org/10.1016/j.msea.2005.11.045.10.1016/j.msea.2005.11.045 ↗
17. Y. G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata, “Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloy,” Mater. Lett., vol. 60, no. 30, pp. 3830–3839, 2006, https://doi.org/10.1016/j.matlet.2006.03.123.10.1016/j.matlet.2006.03.123 ↗
18. F. Sarsilmaz, U. Çaydaş, A. Hasçalik, and L. Tanriover, “The joint properties of dissimilar aluminum plates joined by friction stir welding,” Int. J. Mater. Res., vol. 101, no. 5, pp. 692–699, 2010, https://doi.org/10.3139/146.110329.10.3139/146.110329 ↗
19. H. Okamura, K. Aota, and M. Ezumi, “Friction stir welding of aluminum alloy and application to structure,” J. Jpn. Inst. Light Metals, vol. 50, pp. 166–172, 2000, https://doi.org/10.2464/jilm.50.166.10.2464/jilm.50.166 ↗
20. I. Kırık, N. Özdemir, and F. Sarsilmaz, “Microstructure and mechanical behavior of friction welded AISI 2205 AISI 1040 steel joints,” Mater. Test., vol. 54, no. 2, pp. 683–687, 2012, https://doi.org/10.3139/120.110379.10.3139/120.110379 ↗
21. F. Sarsilmaz, “Weldability characteristics of dissimilar Al Cu friction stir weld joints,” Mater. Test., vol. 54, no. 2, pp. 85–92, 2012, https://doi.org/10.3139/120.110300.10.3139/120.110300 ↗