journal article·2025-06-26Open access

Comparison of crash performance of auxetic structures for CF15, PA6/GF30, and GF30PP materials

Ali Riza Yildiz

Materials Testing· Volume 67· Issue 6

Abstract

Abstract Plate auxetic structures, distinguished by their negative Poisson’s ratio, demonstrate unconventional mechanical responses, expanding laterally under tension and contracting under compression. These systems, particularly plate-based designs, are increasingly studied for their exceptional energy absorption, impact resilience, and structural versatility. This research investigates the mechanical behavior of nine auxetic geometries, including reentrant, chiral, antichiral, meta-chiral, arrowhead, star, and a new hybrid auxetic design for three different materials, which are 30 % short glass fiber reinforced polypropylene (GF30PP), polyamide 6 reinforced with 30 % of short glass fiber (PA6/GF30), and high-temperature resistant polyamide with 15 % carbon fiber (CF15) are materials of the auxetic structures used in this paper. Energy absorption performance, maximum forces, and specific energy absorption amount are analyzed to evaluate their suitability for the nine auxetic designs. Findings reveal that Design 9, which is developed in this paper, shows the best energy absorption capacity for PA6/GF30 and CF15 materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · Transportation Safety and Impact Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering , 37523 Bursa Uludag University , Bursa , Türkiye

Funding

Bursa Uludağ University Scientific Research Projects

References (41)

Show source-provided references
1. C. Zhang and F. Z. Yaoyao, “A critical review on the application of machine learning in supporting auxetic metamaterial design,” J. Phys.: Mater., vol. 7, 2024, https://doi.org/10.1088/2515-7639/ad33a4.10.1088/2515-7639/ad33a4 ↗
2. W. Wu, W. Hu, G. Qian, H. Liao, X. Xu, and F. Berto, “Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review,” Mater. Des., vol. 180, p. 107950, 2019, https://doi.org/10.1016/j.matdes.2019.107950.10.1016/j.matdes.2019.107950 ↗
3. K. Bertoldi, P. M. Reis, S. Willshaw, and T. Mullin, “Negative Poisson’s ratio behavior induced by an elastic instability,” Adv. Mater., vol. 22, no. 3, pp. 361–366, 2010, https://doi.org/10.1002/adma.200901956.10.1002/adma.200901956 ↗
4. L. Yang, O. Harrysson, H. West, and D. Cormier, “Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing,” Int. J. Solids Struct., vol. 69, no. 70, pp. 475–490, 2015, https://doi.org/10.1016/j.ijsolstr.2015.05.005.10.1016/j.ijsolstr.2015.05.005 ↗
5. K. E. Evans and A. Alderson, “Auxetic materials: functional materials and structures from lateral thinking,” Adv. Mater., vol. 12, no. 9, pp. 617–628, 2000, https://doi.org/10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3.10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3 ↗
6. K. E. Evans and K. Alderson, “Auxetic materials: the positive side of being negative,” Eng. Sci. Educ. J., vol. 9, no. 4, pp. 148–154, 2000, https://doi.org/10.1049/esej:20000402.10.1049/esej:20000402 ↗
7. F. Robert, “An isotropic three-dimensional structure with Poisson’s ratio = −1,” J. Elast, vol. 15, no. 4, pp. 427–430, 1985, https://doi.org/10.1007/BF00042531.10.1007/BF00042531 ↗
8. X. -T. Wang, B. Wang, X. -W. Li, and L. Ma, “Mechanical properties of 3D re-entrant auxetic cellular structures,” Int. J. Mech. Sci., vol. 131, pp. 396–407, 2017, https://doi.org/10.1016/j.ijmecsci.2017.05.048.10.1016/j.ijmecsci.2017.05.048 ↗
9. A. Alomarah, D. Ruan, and S. Masood, “Tensile properties of an auxetic structure with re-entrant and chiral features–a finite element study,” Int. J. Adv. Manuf. Technol., vol. 99, nos. 9–12, pp. 2425–2440, 2018, https://doi.org/10.1007/s00170-018-2637-y.10.1007/s00170-018-2637-y ↗
10. V. Lvov, F. S. Senatov, A. M. Korsunsky, and A. I. Salimon, “Design and mechanical properties of 3D-printed auxetic honeycomb structure,” Mater. Today Commun., 2020, https://doi.org/10.1016/j.mtcomm.2020.101173.10.1016/j.mtcomm.2020.101173 ↗
11. U. D. Larsen, O. Signund, and S. Bouwsta, “Design and fabrication of compliant micromechanisms and structures with negative Poisson’s ratio,” J. Microelectromech. Syst., vol. 6, no. 2, pp. 99–106, 1997, https://doi.org/10.1109/84.585787.10.1109/84.585787 ↗
12. D. Prall and S. R. Lakes, “Properties of a chiral honeycomb with a Poisson’s ratio of-1,” Int. J. Mech. Sci., vol. 39, no. 3, pp. 305–314, 1997, https://doi.org/10.1016/S0020-7403(96)00025-2.10.1016/S0020-7403(96)00025-2 ↗
13. S. Ghaedizadeh, R. Mirzaeifar, A. M. Masoudi, and J. B. Gibson, “A review on auxetic structures,” J. Mater. Res. Technol., vol. 9, no. 5, pp. 12205–12230, 2020, https://doi.org/10.1016/j.jmrt.2020.08.057.10.1016/j.jmrt.2020.08.057 ↗
14. G. Imbalzano, T. Ngo, P. Tran, and P. Vrcelj, “Design and mechanical properties of additively manufactured auxetic polymeric metamaterials,” Mater. Des., vol. 160, pp. 1200–1212, 2018, https://doi.org/10.1016/j.matdes.2018.11.008.10.1016/j.matdes.2018.11.008 ↗
15. J. N. Grima, R. Gatt, A. Alderson, and K. E. Evans, “On the potential of connected stars as auxetic systems,” Mol. Simul., vol. 31, no. 13, pp. 925–935, 2005, https://doi.org/10.1080/08927020500401139.10.1080/08927020500401139 ↗
16. A. Alderson, et al.., “Elastic constants of 3-4-and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading,” Compos. Sci. Technol., vol. 70, no. 7, pp. 1042–1048, 2010, https://doi.org/10.1016/j.compscitech.2009.07.009.10.1016/j.compscitech.2009.07.009 ↗
17. X. L. Ruan, et al.., “Mechanical design of antichiral-reentrant hybrid intravascular stent,” Int. J. Appl. Mech., vol. 10, no. 10, 2018, https://doi.org/10.1142/S1758825118501053.10.1142/S1758825118501053 ↗
18. A. Bacigalupo and ML De Bellis, “Auxetic anti-tetrachiral materials: equivalent elastic properties and frequency band-gaps,” Compos. Struct., vol. 131, pp. 530–544, 2015, https://doi.org/10.1016/j.compstruct.2015.05.039.10.1016/j.compstruct.2015.05.039 ↗
19. W. Wu, W. Hu, G. Qian, H. Liao, X. Xu, and F. Berto, “Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review,” Mater. Des., vol. 180, 2019, https://doi.org/10.1016/j.matdes.2019.107950.10.1016/j.matdes.2019.107950 ↗
20. M. Ruzzene, P. M. Reis, and M. Gei, “Auxetic materials: mechanical metamaterials exhibiting negative Poisson’s ratio,” J. Appl. Mech., vol. 85, no. 11, 2018, https://doi.org/10.1115/1.4041656.10.1115/1.4041656 ↗
21. J. Li, Z. Wang, and Y. Shen, “3D printing of auxetic metamaterials for biomedical applications,” Mater. Today, vol. 32, pp. 85–95, 2020, https://doi.org/10.1016/j.mattod.2020.08.001.10.1016/j.mattod.2020.08.001 ↗
22. T. A. Schaedler and W. B. Carter, “Architected cellular materials,” Annu. Rev. Mater. Res., vol. 46, pp. 187–210, 2016, https://doi.org/10.1146/annurev-matsci-070115-032036.10.1146/annurev-matsci-070115-031624 ↗
23. X. Ren, R. Das, P. Tran, T. D. Ngo, and Y. M. Xie, “Auxetic metamaterials and structures: a review,” Smart Mater. Struct., vol. 27, no. 2, 2018, https://doi.org/10.1088/1361-665X/aaa61c.10.1088/1361-665X/aaa61c ↗
24. M. Kadic, T. Bückmann, R. Schittny, and M. Wegener, “Metamaterials beyond electromagnetism,” Rep. Prog. Phys., vol. 76, no. 12, 2013, https://doi.org/10.1088/0034-4885/76/12/126501.10.1088/0034-4885/76/12/126501 ↗
25. Z. Wei, Y. Gu, and J. Zhu, “Programmable auxetic mechanical metamaterials,” Mater. Des., vol. 160, pp. 557–568, 2018, https://doi.org/10.1016/j.matdes.2018.09.041.10.1016/j.matdes.2018.09.041 ↗
26. R. Lakes, “Foam structures with a negative Poisson’s ratio,” Science, vol. 235, no. 4792, pp. 1038–1040, 1987, https://doi.org/10.1126/science.235.4792.1038.10.1126/science.235.4792.1038 ↗
27. C. Coulais, C. Kettenis, and M. van Hecke, “A characteristic length scale causes anomalous size effects and boundary programmability in mechanical metamaterials,” Nat. Phys., vol. 14, pp. 40–44, 2018, https://doi.org/10.1038/nphys4269.10.1038/nphys4269 ↗
28. S. Shan, et al.., “Multistable architected materials for trapping elastic strain energy,” Adv. Mater., vol. 27, no. 29, pp. 4296–4301, 2015, https://doi.org/10.1002/adma.201501708.10.1002/adma.201501708 ↗
29. G. Zhang, P. Cao, Y. Zhang, and X. Jin, “Energy absorption of 3D-printed re-entrant honeycomb structures under dynamic loading,” Int. J. Mech. Sci., pp. 161–162, 2019, https://doi.org/10.1016/j.ijmecsci.2019.105064.10.1016/j.ijmecsci.2019.105064 ↗
30. X. Ren, P. Tran, T. D. Ngo, and Y. M. Xie, “Bi-material auxetic mechanical metamaterials with tunable mechanical properties,” Adv. Mater., vol. 32, no. 3, 2019, https://doi.org/10.1002/adma.201905233.
31. M. Shruti, N. S. Hemanth, N. D. Badgayan, and S. K. Sahu, “Compressive behavior of auxetic structural metamaterial for lightweight construction using ANSYS static structural analysis,” Mater. Today: Proc., 2020, https://doi.org/10.1016/j.matpr.2020.05.410.10.1016/j.matpr.2020.05.410 ↗
32. R. Hamzehei, S. Rezaei, J. Kadkhodapour, A. P. Anaraki, and A. Mahmoudi, “2D triangular anti-trichiral structures and auxetic stents with symmetric shrinkage behavior and high energy absorption,” Mech. Mater., vol. 142, p. 103291, 2020, https://doi.org/10.1016/j.mechmat.2019.103291.10.1016/j.mechmat.2019.103291 ↗
33. A. Ingrole, A. Hao, and R. Liang, “Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement,” Mater. Des., vol. 117, pp. 72–83, 2017, https://doi.org/10.1016/j.matdes.2016.12.067.10.1016/j.matdes.2016.12.067 ↗
34. W. Lee, et al.., “Effect of auxetic structures on crash behavior of cylindrical tube,” Compos. Struct., vol. 208, pp. 836–846, 2019, https://doi.org/10.1016/j.compstruct.2018.10.068.10.1016/j.compstruct.2018.10.068 ↗
35. T. Li, Y. Chen, X. Hu, Y. Li, and L. Wang, “Exploiting negative Poisson’s ratio to design 3D-printed composites with enhanced mechanical properties,” Mater. Des., vol. 142, pp. 247–258, 2018, https://doi.org/10.1016/j.matdes.2018.01.034.10.1016/j.matdes.2018.01.034 ↗
36. H. Najafi, H. Ahmadi, and G. Liaghat, “Experimental investigation on energy absorption of auxetic structures,” Mater. Today: Proc., vol. 34, pp. 350–355, 2019, https://doi.org/10.1016/j.matpr.2020.06.075.10.1016/j.matpr.2020.06.075 ↗
37. V. A. Lvov, F. S. Senatov, A. M. Korsunsky, and A. I. Salimon, “Design and mechanical properties of 3D-printed auxetic honeycomb structure,” Mater. Today Commun., vol. 24, p. 101173, 2020, https://doi.org/10.1016/j.mtcomm.2020.101173.10.1016/j.mtcomm.2020.101173 ↗
38. K. Günaydın, C. Rea, and Z. Kazancı, “Energy absorption enhancement of additively manufactured hexagonal and re-entrant (auxetic) lattice structures by using multi-material reinforcements,” Addit. Manuf., vol. 59, p. 103076, 2022, https://doi.org/10.1016/j.addma.2022.103076.10.1016/j.addma.2022.103076 ↗
39. S. Bronder, et al.., “Hybrid auxetic structures: structural optimization and mechanical characterization,” Adv. Eng. Mater., vol. 23, no. 5, 2021, https://doi.org/10.1002/adem.202001393.10.1002/adem.202001393 ↗
40. Q. Gao and W. H. Liao, “Energy absorption of thin-walled tube filled with gradient auxetic structures-theory and simulation,” Int. J. Mech. Sci., vol. 201, p. 106475, 2021, https://doi.org/10.1016/j.ijmecsci.2021.106475.10.1016/j.ijmecsci.2021.106475 ↗
41. R. Valle, G. Pincheira, V. Tuninetti, E. Fernandez, and E. Uribe-Lam, “Design and characterization of asymmetric cell structure of auxetic material for predictable directional mechanical response,” Materials, vol. 15, no. 5, 2022, https://doi.org/10.3390/ma15051841.10.3390/ma15051841 ↗