journal article·2025-12-17

Investigation of tribological behavior of rice husk reinforced high density polyethylene (HDPE) biocomposite

Ferit Ficici, Alaattin Metin Kaya

Materials Testing· Volume 67· Issue 12
Publisher page

Abstract

Abstract In this study, rice husk-reinforced HDPE composites were produced to provide sustainable and economical solutions. For this purpose, HDPE composites with RH ratios of 5 %, 10 %, and 15 % by volume were produced using the injection moulding method. Density, hardness, tensile, bending strength, friction coefficient, and wear values of the produced bio-composite materials were measured. According to the results from the mechanical tests, the lowest density, hardness, tensile, and bending strength values were recorded in the 5 vol % RH + HDPE composite material, while the highest values were observed in the 15 vol % RH + HDPE composite material. Minimum tensile and bending strength values were 27.8 and 31.22 MPa, and maximum tensile and bending strength values were 28,5 and 31,35 MPa. As a result of friction and wear tests, the minimum coefficient of friction and weight loss were found in the 15 vol % RH + HDPE composite material, and the highest values were noted in the 5 vol % RH + HDPE composite material. The minimum coefficient of friction was measured as 00,957 µ and the corresponding weight loss was 00,008 g. The maximum coefficient of friction was 06,485 µ, with a weight loss of 00,022 g.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Global ARGE , 41400 , Kocaeli , Türkiye

Mechanical Engineering , Bursa Uludag University , 16059 , Bursa , Türkiye

References (46)

Show source-provided references
1. E. García et al.., “Mechanical, dynamic and tribological characterization of HDPE/peanut shell composites,” Polym. Test., vol. 98, 2021, Art. no. 107075. https://doi.org/10.1016/j.polymertesting.2021.107075.10.1016/j.polymertesting.2021.107075 ↗
2. N. C. Paxton et al.., “Additive manufacturing enables personalised porous high-density polyethylene surgical implant manufacturing with improved tissue and vascular ingrowth,” Appl. Mater. Today, vol. 22, p. 100965, 2021. https://doi.org/10.1016/j.apmt.2021.100965.10.1016/j.apmt.2021.100965 ↗
3. J. Zhang, Y. Li, D. Xing, Q. Wang, H. Wang, and A. Koubaa, “Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: effects of fiber type and amount,” Constr. Build. Mater., vol. 228, p. 116718, 2019. https://doi.org/10.1016/j.conbuildmat.2019.116718.10.1016/j.conbuildmat.2019.116718 ↗
4. E. Roumeli et al.., “Effect of maleic anhydride on the mechanical and thermal properties of hemp/high-density polyethylene green composites,” J. Therm. Anal. Calorim., vol. 121, no. 1, pp. 93–105, 2015, https://doi.org/10.1007/s10973-015-4596-y.10.1007/s10973-015-4596-y ↗
5. H. Yao, X. Zhong, and C. He, “Performance analysis of plant shells/PVC composites under corrosion and aging conditions,” J. Renew. Mater., vol. 12, no. 5, pp. 993–1006, 2024. https://doi.org/10.32604/jrm.2024.047758.10.32604/jrm.2024.047758 ↗
6. A. Soni et al.., “An overview of recent trends and future prospects of sustainable natural fiber-reinforced polymeric composites for tribological applications,” Ind. Crops Prod., vol. 222, p. 119501, 2024. https://doi.org/10.1016/j.indcrop.2024.119501.10.1016/j.indcrop.2024.119501 ↗
7. A. R. Bhat, R. Kumar, and P. K. S. Mural, “Natural fiber reinforced polymer composites: a comprehensive review of tribo-mechanical properties,” Tribol. Int., vol. 189, p. 108978, 2023. https://doi.org/10.1016/j.triboint.2023.108978.10.1016/j.triboint.2023.108978 ↗
8. A. Soni, P. K. Das, M. Yusuf, and S. Ridha, “Tribological behavior of particulates reinforced sustainable composites: effect of composition, load, and sliding speed,” Sustain. Chem. Pharm., vol. 29, p. 100748, 2022. https://doi.org/10.1016/j.scp.2022.100748.10.1016/j.scp.2022.100748 ↗
9. S. Charoenvai, “Durian peels fiber and recycled HDPE composites obtained by extrusion,” Energy Proc., vol. 56, pp. 539–546, 2014. https://doi.org/10.1016/j.egypro.2014.07.190.10.1016/j.egypro.2014.07.190 ↗
10. L. Palmeira Belotti, H. Vadivel, and N. Emami, “Tribological performance of hygrothermally aged UHMWPE hybrid composites,” Tribol. Int., vol. 138, 2019, https://doi.org/10.1016/j.triboint.2019.05.034.10.1016/j.triboint.2019.05.034 ↗
11. J. Vercher, V. Fombuena, A. Diaz, and M. Soriano, “Influence of fibre and matrix characteristics on properties and durability of wood–plastic composites in outdoor applications,” J. Thermoplast. Compos. Mater., vol. 33, no. 4, pp. 477–500, 2018, https://doi.org/10.1177/0892705718807956.10.1177/0892705718807956 ↗
12. Y. Zhou, M. Fan, and L. Chen, “Interface and bonding mechanisms of plant fibre composites: an overview,” Compos. Part B Eng., vol. 101, pp. 31–45, 2016. https://doi.org/10.1016/j.compositesb.2016.06.055.10.1016/j.compositesb.2016.06.055 ↗
13. H. Younesi-Kordkheili and A. Pizzi, “Ionic liquid- modified lignin as a bio – coupling agent for natural fiber- recycled polypropylene composites,” Compos. Part B Eng., vol. 181, p. 107587, 2020. https://doi.org/10.1016/j.compositesb.2019.107587.10.1016/j.compositesb.2019.107587 ↗
14. H. G. B. Premalal, H. Ismail, and A. Baharin, “Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites,” Polym. Test., vol. 21, no. 7, pp. 833–839, 2002. https://doi.org/10.1016/S0142-9418(02)00018-1.10.1016/S0142-9418(02)00018-1 ↗
15. R. Arjmandi, A. Hassan, K. Majeed, and Z. Zakaria, “Rice husk filled polymer composites,” Int. J. Polym. Sci., vol. 2015, no. Oct, 2015, https://doi.org/10.1155/2015/501471.10.1155/2015/501471 ↗
16. M. Ahmad, A. Rahmat, and A. Hassan, “Mechanical properties of unplasticised PVC (PVC-U) containing rice husk and an impact modifier,” Polym. Polym. Compos., vol. 18, pp. 527–536, 2010, https://doi.org/10.1177/096739111001800908.10.1177/096739111001800908 ↗
17. N. Bukit, K. S. Sinulingga, A. H. S. S. Hakim, M. S. Sirait, and B. F. B. Bukit, “Mechanical and thermal properties of HDPE thermoplastic with oil palm boiler ash nano filler,” J. Ecol. Eng., vol. 24, no. 9, pp. 355–363, 2023, https://doi.org/10.12911/22998993/169470.10.12911/22998993/169470 ↗
18. N. Chand, M. Fahim, P. Sharma, and M. N. Bapat, “Influence of foaming agent on wear and mechanical properties of surface modified rice husk filled polyvinylchloride,” Wear, vols. 278–279, pp. 83–86, 2012. https://doi.org/10.1016/j.wear.2012.01.002.10.1016/j.wear.2012.01.002 ↗
19. H. Fouad and R. Elleithy, “High density polyethylene/graphite nano-composites for total hip joint replacements: processing and in vitro characterization,” J. Mech. Behav. Biomed. Mater., vol. 4, no. 7, pp. 1376–1383, 2011. https://doi.org/10.1016/j.jmbbm.2011.05.008.10.1016/j.jmbbm.2011.05.008 ↗
20. M. S. Jamil, I. Ahmad, and I. Abdullah, “Effects of rice husk filler on the mechanical and thermal properties of liquid natural rubber compatibilized high-density polyethylene/natural rubber blends,” J. Polym. Res., vol. 13, no. 4, pp. 315–321, 2006, https://doi.org/10.1007/s10965-005-9040-8.10.1007/s10965-005-9040-8 ↗
21. W. Lu, W. Yu, B. Zhang, X. Dou, X. Han, and H. Cai, “Kevlar fibers reinforced straw wastes-polyethylene composites: combining toughness, strength and self-extinguishing capabilities,” Compos. Part B Eng., vol. 223, p. 109117, 2021. https://doi.org/10.1016/j.compositesb.2021.109117.10.1016/j.compositesb.2021.109117 ↗
22. T. Narayanan and J. Abd Razak, “Process parameter interaction study for mechanical strength of r-HDPE filled calcium carbonate composites,” Eng. Res. Express, vol. 6, 2024, https://doi.org/10.1088/2631-8695/ad7e7b.10.1088/2631-8695/ad7e7b ↗
23. G. Madhu, H. Bhunia, P. K. Bajpai, and V. Chaudhary, “Mechanical and morphological properties of high density polyethylene and polylactide blends,” J. Polym. Eng., vol. 34, no. 9, pp. 813–821, 2014, https://doi.org/10.1515/polyeng-2013-0174.10.1515/polyeng-2013-0174 ↗
24. A. S. Huseynova, R. M. Rzayev, and F. V. Hajiyeva, “Investigation on the structure and thermal properties of HDPE/Ta2O5-based nanocomposites,” J. Elastomers Plast., vol. 56, no. 8, pp. 929–941, 2024, https://doi.org/10.1177/00952443241289560.10.1177/00952443241289560 ↗
25. Q. Zhang, W. Yi, Z. Li, L. Wang, and H. Cai, “Mechanical properties of rice husk biochar reinforced high density polyethylene composites,” Polymers, vol. 10, no. 3, 2018, https://doi.org/10.3390/polym10030286.10.3390/polym10030286 ↗
26. Q. Zhang, Y. Li, H. Cai, X. Lin, W. Yi, and J. Zhang, “Properties comparison of high density polyethylene composites filled with three kinds of shell fibers,” Results Phys, vol. 12, pp. 1542–1546, 2019. https://doi.org/10.1016/j.rinp.2018.09.054.10.1016/j.rinp.2018.09.054 ↗
27. M. A. Suhot, M. Z. Hassan, S. A. Aziz, and M. Y. Md Daud, “Recent progress of rice husk reinforced polymer composites: a review,” Polymers, vol. 13, no. 15, 2021, https://doi.org/10.3390/polym13152391.10.3390/polym13152391 ↗
28. E. Nicolao, P. Leiva, M. Chalapud, R. Ruseckaite, E. Ciannamea, and P. Stefani, “Flexural and tensile properties of biobased rice husk-jute-soybean protein particleboard,” J. Build. Eng., vol. 30, 2020, https://doi.org/10.1016/j.jobe.2020.101261.10.1016/j.jobe.2020.101261 ↗
29. N. Jain, K. S. Somvanshi, P. C. Gope, and V. K. Singh, “Mechanical characterization and machining performance evaluation of rice husk/epoxy an agricultural waste based composite material,” Mater. Test., vol. 28, no. 1, pp. 29–38, 2019, https://doi.org/10.1515/jmbm-2019-0005.10.1515/jmbm-2019-0005 ↗
30. A. B. Karakullukcu, E. Taban, and O. O. Ojo, “Biocompatibility of biomaterials and test methods: a review,” Mater. Test., vol. 65, no. 4, pp. 545–559, 2023, https://doi.org/10.1515/mt-2022-0195.10.1515/mt-2022-0195 ↗
31. D. Veeman, P. M. B. Ram, M. Ravichandran, and J. K. Katiyar, “Tribological, mechanical, and metallurgical performance of natural fiber-reinforced composites: a comprehensive review,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 238, no. 3, pp. 243–259, 2023, https://doi.org/10.1177/13506501231211625.10.1177/13506501231211625 ↗
32. K. Vinoth Kumar, R. Pavendhan, P. Senthamaraikannan, T. Sonar, and A. Osipov, “Effect of bio-waste conch filler addition on mechanical performance of glass fiber-reinforced epoxy polymer composite,” Mater. Test., vol. 66, no. 12, pp. 1990–1998, 2024, https://doi.org/10.1515/mt-2024-0177.10.1515/mt-2024-0177 ↗
33. S. Krishnakumar, V. Mohanavel, R. Venkatesh, and K. Balasubramanian, “Enhancement of tribology behaviour by the addition of different fiber length of pineapple fiber reinforced polyester composite,” J. Mech. Sci. Technol., vol. 38, no. 1, pp. 201–206, 2024, https://doi.org/10.1007/s12206-023-1217-8.10.1007/s12206-023-1217-8 ↗
34. K. Rasu and A. Veerabathiran, “Tribological behaviour of industrial waste based agave sisalana/glass fiber reinforced hybrid composites for marine applications,” Mater. Test., vol. 65, no. 4, pp. 593–602, 2023, https://doi.org/10.1515/mt-2022-0431.10.1515/mt-2022-0431 ↗
35. T. A. Negawo, Y. Polat, and A. Kilic, “Effect of compatibilizer and fiber loading on ensete fiber-reinforced HDPE green composites: physical, mechanical, and morphological properties,” Compos. Sci. Technol., vol. 213, p. 108937, 2021. https://doi.org/10.1016/j.compscitech.2021.108937.10.1016/j.compscitech.2021.108937 ↗
36. G. S. Balan, V. S. Kumar, S. Rajaram, and M. Ravichandran, “Investigation on water absorption and wear characteristics of waste plastics and seashell powder reinforced polymer composite,” J. Tribol., vol. 27, pp. 57–70, 2020.
37. J. F. Louvier-Hernández et al.., “Tribo-mechanical behavior of HDPE/natural fibers filler composite materials,” MRS Adv, vol. 3, no. 63, pp. 3775–3781, 2018, https://doi.org/10.1557/adv.2018.644.10.1557/adv.2018.644 ↗
38. F. Ficici, I. Ozdemir, T. Grund, and T. Lampke, “Investigation of tribological behavior of PTFE composites reinforced with bronze particles by taguchi method,” J. Compos. Sci., vol. 8, no. 10, 2024, https://doi.org/10.3390/jcs8100398.10.3390/jcs8100398 ↗
39. F. Kahraman, U. Esme, M. K. Kulekci, and S. Ocalir, “Abrasive wear and frictional behavior of polyoxymethylen,” Mater. Test., vol. 59, no. 10, pp. 881–884, 2017, https://doi.org/10.3139/120.111083.10.3139/120.111083 ↗
40. M. Sakthivel, K. Srinivasan, and A. G. G. Kumar, “Wear behavior of Sansevieria cylindrica and E-glass reinforced polyester composites,” Mater. Test., vol. 61, no. 3, pp. 239–242, 2019, https://doi.org/10.3139/120.111310.10.3139/120.111310 ↗
41. M. Korku and E. Feyzullahoğlu, “Wear behaviour of glass fiber reinforced polyester composites under dry friction and fluid film lubrication,” Mater. Test., vol. 66, no. 5, pp. 749–759, 2024, https://doi.org/10.1515/mt-2023-0420.10.1515/mt-2023-0420 ↗
42. B. Siddharthan and A. Kumaravel, “Wear behaviour of titanium diboride and zirconium carbide reinforced LM13 hybrid composite for automotive applications,” Mater. Test., vol. 66, no. 11, pp. 1829–1842, 2024, https://doi.org/10.1515/mt-2024-0143.10.1515/mt-2024-0143 ↗
43. F. Ficici and A. M. Kaya, “Friction and wear properties of uhmwpe and peek polymers,” Mater. Test., vol. 67, no. 8, pp. 1375–1381, 2025, https://doi.org/10.1515/mt-2024-0512.10.1515/mt-2024-0512 ↗
44. A. Nabhan, G. Sherif, R. Abouzeid, and M. Taha, “Mechanical and tribological performance of HDPE matrix reinforced by hybrid Gr/TiO2 NPs for hip joint replacement,” J. Funct. Biomater., vol. 14, no. 3, 2023, https://doi.org/10.3390/jfb14030140.10.3390/jfb14030140 ↗
45. K. Güngör, I. Ozsert, A. Demirer, F. Ficici, and A. Demir, “Experimental optimization of wear parameters of sintered bronze based materials,” Indian J. Eng. Mater. Sci., vol. 22, pp. 288–296, 2015.
46. Ö. Savaş, F. Ficici, R. Kayikci, and S. Koksal, “Investigation of mechanical and dry sliding wear behaviours of AlB 2/PE polymer matrix composites,” Acta Phys. Pol. A, vol. 125, pp. 388–390, 2014, https://doi.org/10.12693/APhysPolA.125.388.10.12693/APhysPolA.125.388 ↗