journal article·2021-08-31

Microstructure and mechanical properties of 6082-T6 aluminum alloy–zinc coated steel braze-welded joints

Ion Mitelea, Corneliu Marius Crăciunescu, Ciprian Pavel Lucian, Ion Dragoş Uţu

Materials Testing· Volume 63· Issue 8
Publisher page

Abstract

Abstract The laser braze-welding technique was aimed to join a low alloyed zinc coated steel used in automotive industry, with a deformable, aging hardenable aluminum alloy from the 6xxx series using as filler material a AlSi12 wire. The heterogeneous joint was obtained by welding of aluminum alloy with the filler wire and by brazing of molten aluminum alloy together with the filler wire on the surface of a zinc coated steel which remained in solid state. The results showed that by using a proper heat input, the zinc coated steel was brazed without a melting process by the aluminum alloy which was in liquid state. On the interface between the zinc coated steel and the welded seam, a thin layer (the thickness was 6 to 8 μm) formed consisting of star (Al-Fe-Si) or needle shape (Mg-Al-Fe-Mn) intermetallic phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Timisoara , Romania

References (25)

Show source-provided references
1. A. K. Mukhopadhyay: Microstructure and properties of high strength aluminium alloys for structural applications, Transactions of The Indian Institute of Metals 62 (2009), pp. 113-122 DOI:10.1007/s12666-009-0015-z10.1007/s12666-009-0015-z ↗
2. M. Mazar Atabaki, M. Nikodinovski, P. Chenier, R. Kovacevic: Welding of aluminum alloys to steels: An overview, Journal for Manufacturing Science and Production 14 (2014), No. 2, pp. 59-78 DOI:10.1515/jmsp-2014-000710.1515/jmsp-2014-0007 ↗
3. M. J. Zhang, G. Y. Chen, Y. Zhang, K. R. Wu: Research on microstructure and mechanical properties of laser keyhole welding–brazing of automotive galvanized steel to aluminum alloy, Materials & Design 45 (2013), pp. 24-30 DOI:10.1016/j.matdes.2012.09.02310.1016/j.matdes.2012.09.023 ↗
4. N. Cavusoglu, H. Ozden: Automobile manufacturing using laser beam welding, Welding Journal 92 (2013), No. 2, pp. 32-37
5. E. Akca, A. Gursel: Joining of dissimilar metals by diffusion bonding: Titanium alloy with aluminium, Materials Testing 59 (2017), No. 4, pp. 330-337 DOI:10.3139/120.11100610.3139/120.111006 ↗
6. H. T. Zhang, J. C. Feng, P. He, H. Hackl: Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process, Materials Characterization 58 (2007), pp. 588-592 DOI:10.1016/j.matchar.2006.07.00810.1016/j.matchar.2006.07.008 ↗
7. F. Haidara, M.-C. Record, B. Duployer, D. Mangelinck: Phase formation in Al-Fe thin film systems, Intermetallics 23 (2012), pp. 143-147 DOI:10.1016/j.intermet.2011.11.01710.1016/j.intermet.2011.11.017 ↗
8. M. Mazar Atabaki, M. Nikodinovski, P. Chenier, J. Ma, M. Harooni, R. Kovacevic: Welding of aluminum alloys to steels: An overview, Journal for Manufacturing Science and Production 14(2) (2014), pp. 59-78 DOI:10.1515/jmsp-2014-000710.1515/jmsp-2014-0007 ↗
9. A. Mathieua, S. Pontevicci, J. Vialab, E. Cicalaa, S. Matti, D. Grevey: Laser brazing of a steel/ aluminum assembly with hot filler wire (88 % Al, 12 % Si), Materials Science and Engineering A 435-436 (2006), pp. 19-28 DOI:10.1016/j.msea.2006.07.09910.1016/j.msea.2006.07.099 ↗
10. A. Bouayad, Ch. Gerometta, A. Belkebir, A. Ambari: Kinetic interactions between solid iron and molten aluminium, Materials Science and Engineering A 363 (2003), pp. 53-61 DOI:10.1016/S0921-5093(03)00469-610.1016/S0921-5093(03)00469-6 ↗
11. R. Cao, Q. Huang, J. H. Chen, P.-C. Wang: Cold metal transfer spot plug welding of AA6061-T6-to-galvanized steel for automotive applications, Journal of alloys and compounds 585 (2014), pp. 622-632 DOI:10.1016/j.jallcom.2013.09.19710.1016/j.jallcom.2013.09.197 ↗
12. R. Cao, G. Yu, J. H. Chen, P-C. Wang: Cold metal transfer joining aluminum alloys-to galvanized mild steel, Journal of Materials Processing Technology 213 (2013), pp. 1753-1763 DOI:10.1016/j.jmatprotec.2013.04.00410.1016/j.jmatprotec.2013.04.004 ↗
13. C. Dharmendra, K. P. Rao, J. Wilden, S. Reich: Study on laser welding-brazing of zinc coated steel to aluminum alloy with a zinc based filler, Materials Science and Engineering A 528 (2011), pp. 1497-1503 DOI:10.1016/j.msea.2010.10.05010.1016/j.msea.2010.10.050 ↗
14. S. Kasman: Effects of FSW parameters and pin geometry on the weldability of EN AW 2024 alloy, Materials Testing 58 (2016), No. 7-8, pp. 694-701 DOI:10.3139/120.11090810.3139/120.110908 ↗
15. S. Kobayashi, T. Yakou: Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment, Materials Science and Engineering A 338 (2002), pp. 44-53 DOI:10.1016/S0921-5093(02)00053-910.1016/S0921-5093(02)00053-9 ↗
16. A. Koltsov, N. Bailly, L. Cretteur: Wetting and laser brazing of Zn-coated steel products by Cu-Si filler metal, Journal of Materials Science 45 (2010), pp. 2118-2125 DOI:10.1007/s10853-009-3949-y10.1007/s10853-009-3949-y ↗
17. J. Lin, N. Ma, Y. Lei, H. Murakawa: Shear strength of CMT brazed lap joints between aluminium and zinc-coated steel, Journal of Materials Processing Technology 213 (2013) pp. 1303-1310 DOI:10.1016/j.jmatprotec.2013.02.01110.1016/j.jmatprotec.2013.02.011 ↗
18. D. Naoi, M. Kajihara: Growth behaviour of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperatures, Material Science and Engineering A 459 (2007), pp. 375-382 DOI:10.1016/j.msea.2007.01.09910.1016/j.msea.2007.01.099 ↗
19. G. Qin, Z. Lei, Y. Su, B. Fu, X. Meng, S. Lin: Large spot laser assisted GMA brazing-fusion welding of aluminum alloy to galvanized steel, Journal of Materials Processing Technology 214 (2014), pp. 2684-2692 DOI:10.1016/j.jmatprotec.2014.06.01110.1016/j.jmatprotec.2014.06.011 ↗
20. Y. Su, X. H, Y. Wu: Effect of input current modes on intermetallic layer and mechanical property of aluminum-steel lap joint obtained by gas metal arc welding, Material Science &Engineering A 578 (2013), pp. 340-345 DOI:10.1016/j.msea.2013.04.09710.1016/j.msea.2013.04.097 ↗
21. H. T. Zhang, J. C. Feng, P. He, B. B. Zhang, J. M. Chen, L. Wang: The arc characteristics and metal transfer behavior of cold metal transfer and its use in joining aluminium to zinc-coated steel, Materials Science and Engineering A 499 (2009), pp. 111-113 DOI:10.1016/j.msea.2007.11.12410.1016/j.msea.2007.11.124 ↗
22. L. Jia, J. Shichun, S. Yan, N. Cong, C. Junke, H. Genzhe: Effects of zinc on the laser welding of an aluminum alloy and galvanized steel, Journal of Materials Processing Technology 224 (2015), pp. 49-59 DOI:10.1016/j.jmatprotec.2015.04.01710.1016/j.jmatprotec.2015.04.017 ↗
23. H. Dong, W. Hu, Y. Duan, X. Wang, C. Dong: Dissimilar metal joining of aluminum alloy to galvanized steel with Al–Si, Al–Cu, Al–Si–Cu and Zn–Al filler wires, Journal of Materials Processing Technology 212 (2012), pp. 458-464 DOI:10.1016/j.jmatprotec.2011.10.00910.1016/j.jmatprotec.2011.10.009 ↗
24. M. Gao, C. Chen, S. Mei, L. Wang, X. Zeng: Parameter optimization and mechanism of laser-arc hybrid welding of dissimilar Al alloy and stainless steel, The International Journal of Advanced Manufacturing Technology 74 (2014), pp. 199-208 DOI:10.1007/s00170-014-5996-z10.1007/s00170-014-5996-z ↗
25. C. P. Lucian, I. Mitelea, S. Oana, M. Burca, N. Simon: The opportunity to join through laser braze-welding of aluminium alloys with galvanized low alloy steels, Materials Today: Proceeding 2021, In Press (https://www.sciencedirect.com/science/article/pii/S221478532039550X)10.1016/j.matpr.2020.11.874 ↗