journal article·2017-01-05

The buckling resistance of welded plate girders taking into account the influence of post-welding imperfections – Part 1: Parameter study

Benjamin Launert, Radosław Szczerba, Marcin Gajewski, Michael Rhode, Hartmut Pasternak, Marian Giżejowski

Materials Testing· Volume 59· Issue 1
Publisher page

Abstract

Abstract Welding is the most important joining technique and offers the advantage of customizable plate thicknesses. On the other hand, welding causes residual stresses and deformations influencing the load carrying capacity. Their consideration in the design requires simple and fast models. Though welding simulation has contributed to accurately access to these values nowadays, their application to large components remains still in a less practicable range. Nevertheless, many studies emphasized the need to make corrections in recently available simplified models. Especially the influence of residual stresses seems somewhat overestimated in many cases if comparing conventional structural steel S355 and high-strength steel S690. In times of computer-aided design, an improved procedure to implement weld-inducted imperfections appears overdue. This will be presented in two parts. The first part illustrates the potential influence of post-welding imperfections exemplified for weak axis buckling in comparison with the general method in accordance with Eurocode 3. Residual stresses and initial crookedness were varied systematically in order to produce a scatter band of capacities. An approach to characterize the borders of these imperfections was untertaken before that. The excessive scattering of reduction factors for the load bearing capacity demonstrates the importance of these variables. Results were finally evaluated against advanced simulation models which will be further detailed in part two of this contribution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Cottbus , Germany

Warsaw , Poland

Berlin , Germany

References (26)

Show source-provided references
1. Tragfähigkeit von Stäben aus Baustahl–Nichtlineares Tragverhalten, Stabilität
2. 2000
3. 2015
4. Computing welding distortion: Comparison of different industrially applicable methods10.4028/www.scientific.net/AMR.6-8.195 ↗
5. Numerische Simulation und Kompensation von Schweißverzügen im Karosseriebau: Beitrag zur Steigerung der Maßhaltigkeit im Fertigungsprozess
6. Welding of girder with thick plates–Fabrication, measurement and simulation, Journal of Constructional Steel Research · 2015 · 115 · 40710.1016/j.jcsr.2015.08.037 ↗
7. Modelling of residual stresses and deformations due to welding: “Knowing what isn't necessary to know”
8. Vereinfachte Modelle zur Schweißverzugsberechnung
9. Residual stress influence on the flexural buckling of welded I-girders
10. Annex C to EN 1993-1-5–Finite element methods of analysis (FEM)
11. 2010
12. An analysis of the performance of welded wide flange columns, Canadian Journal of Civil Engineering · 1991 · 18 · 53710.1139/l91-067 ↗
13. Residual stresses and imperfections in welded high-strength I-shape sections
14. N. N. · 1984
15. N. N. · 2003
16. 2004
17. Welding residual stresses in high-strength steel – Experimental results
18. 2016
19. 2016
20. 2015
21. 2016 · 16910.1201/b21417-24 ↗
22. Beam-column resistance interaction criteria for in-plane bending and compression, Procedia Engineering · 2015 · 111 · 25410.1016/j.proeng.2015.07.086 ↗
23. Analysis of steel I-beam-columns cross section resistance with use of finite element method, Czasopismo Inżynierii Lądowej, Środowiska i Architektury (en10.7862/rb.2015.166 ↗
24. Flexural buckling behavior considering different residual stress approaches
25. Combining sectioning method and X-ray diffraction for evaluation of residual stresses in welded high strength steel components
26. Measuring methods of three-dimensional residual stresses with aid of distribution function of inherent strains (Report 3)–Distributions of residual stresses and inherent strains in fillet welds, Trans