Hardness and corrosion properties of AA7075 aluminum alloy coated with WC-Co by HVOF
Source abstract
Abstract
Abstract In this study, AA7075-T6 aluminum alloy substrates were coated with WC-Co by the high velocity oxy-fuel (HVOF) method. The coatings were applied in two and four layers to surfaces with three different roughnesses. The effects of WC-Co coating applied to the AA7075 aluminum surface on the hardness and corrosion properties of the alloy were examined. The corrosion properties of uncoated and WC-Co coated aluminum alloy samples were determined in salt water environment by potentiodynamic corrosion tests. Additionally, microstructure and XRD examinations of the samples were performed. The surface hardness of WC-Co coated samples increased by up to 140 %. According to the results of corrosion tests, it was determined that the WC-Co coating applied to the surface of AA7075 aluminum alloy improved its corrosion resistance by reducing the corrosion rate of the alloy. The best corrosion resistance was obtained in four layers of coating on the sample with the smallest surface roughness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Aluminum Alloys Composites Properties · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgical and Materials Engineering , Gazi University , Ankara , 06560 , Türkiye
Metallurgical and Materials Engineering , 162313 Hitit University , Corum , 19030 , Türkiye
References (26)
Show source-provided references
1. G. Bolelli, L. Lusvarghi, and M. Barletta, “HVOF-sprayed WC-CoCr coatings on Al alloy: effect of the coating thickness on the tribological properties,” Wear, vol. 267, pp. 944–953, 2009, https://doi.org/10.1016/j.wear.2008.12.066.10.1016/j.wear.2008.12.066 ↗
2. H. Varol Ozkavak, S. Sahin, M. F. Sarac, and Z. Alkan, “Wear properties of WC-Co and WC-CoCr coatings [applied by HVOF technique on different steel substrates,” Mater. Test., vol. 62, no. 12, pp. 1235–1242, 2020, https://doi.org/10.3139/120.111609.10.3139/120.111609 ↗
3. S. Islak, et al.., “Microstructure characterization of WCCo-Mo based coatings produced using high velocity oxygen fuel,” Pamukkale Uni. J. Eng. Sci., vol. 21, no. 8, pp. 344–347, 2015, https://doi.org/10.5505/pajes.2015.56933.10.5505/pajes.2015.56933 ↗
4. C. Özorak, F. Okay, E. Özorak, and S. Islak, “Wear and microstructural properties of coatings on Weldox 700 steel,” Mater. Test., vol. 62, no. 6, pp. 645–651, 2020, https://doi.org/10.3139/120.111526.10.3139/120.111526 ↗
5. S. Özel, “Microstructure and mechanical properties of HVOF sprayed WC-Co/NiCrBSi, Cr3C2 coatings on Al alloys,” Mater. Test., vol. 55, no. 9, pp. 694–700, 2013, https://doi.org/10.3139/120.110489.10.3139/120.110489 ↗
6. O. P. Oladijo, N. Sacks, L. A. Cornish, and A. M. Venter, “Effect of substrate on the 3 body abrasion wear of HVOF WC-17 wt.% Co coatings,” Int. J. Refract. Met. Hard Mater., vol. 35, pp. 288–294, 2012, https://doi.org/10.1016/j.ijrmhm.2012.06.011.10.1016/j.ijrmhm.2012.06.011 ↗
7. M. Couto, S. Dosta, and J. M. Guilemany, “Comparison of the mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by high velocity oxy-fuel and cold gas spraying,” Surf. Coat. Technol., vol. 268, pp. 180–189, 2015, https://doi.org/10.1016/j.surfcoat.2014.04.034.10.1016/j.surfcoat.2014.04.034 ↗
8. H. Durmuş, M. Türkmen, and U. Çalıgülü, “Investigation of tribological properties of WC coatings applied to different substrate materials,” Technol. Appl. Sci., vol. 15, no. 2, pp. 23–28, 2020, https://doi.org/10.12739/NWSA.2020.15.2.2A0181.10.12739/NWSA.2020.15.2.2A0181 ↗
9. Y. Özgürlük, “Evaluation of hot corrosion behavior of WC-Co-Cr coatings coated by the HVOF method,” J. Mater. Mechatron., vol. 4, no. 1, pp. 286–301, 2023, https://doi.org/10.55546/jmm.1287543.10.55546/jmm.1287543 ↗
10. A. Lekatou, D. Zois, A. E. Karantzalis, and D. Grimanelis, “Electrochemical behaviour of cermet coatings with a bond coat on Al7075: Pseudopassivity, localized corrosion and galvanic effect considerations in a saline environment,” Corros. Sci., vol. 52, pp. 2616–2635, 2010, https://doi.org/10.1016/j.corsci.2010.04.010.10.1016/j.corsci.2010.04.010 ↗
11. D. S. Prasad, P. T. Radha, C. Shoba, and P. S. Rao, “Dynamic mechanical behavior of WC-Co coated A356.2 aluminum alloy,” J. Alloys Compd., vol. 767, pp. 988–993, 2018, https://doi.org/10.1016/j.jallcom.2018.07.203.10.1016/j.jallcom.2018.07.203 ↗
12. A. Lekatou, D. Zois, and D. Grimanelis, “Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment,” Thin Solid Films, vol. 516, pp. 5700–5705, 2008, https://doi.org/10.1016/j.tsf.2007.07.130.10.1016/j.tsf.2007.07.130 ↗
13. R.V. Prasad, R. Rajesh, D. Thirumalaikumarasamy, M. Ashokkumar, and S. Rajakumar, “Multi response optimization of HVOF process parameters in low carbon steels,” Sadhana, vol. 47, pp. 265–282, 2022, https://doi.org/10.1007/s12046-022-02045-4.10.1007/s12046-022-02045-4 ↗
14. R. V. Prasad, R. Rajesh, D. Thirumalaikumarasamy, S. Vignesh, and A. Sreesabari, “Sensitivity analysis and optimisation of HVOF process inputs to reduce porosity and maximise hardness of WC-10Co-4Cr coatings,” Sadhana, vol. 46, pp. 149–172, 2021, https://doi.org/10.1007/s12046-021-01667-4.10.1007/s12046-021-01667-4 ↗
15. C. J. Villalobos-Gutierrez, et al.., “Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC-10Co-4Cr alloy deposited by HVOF thermal spraying,” Surf. Coat. Technol., vol. 202, pp. 4572–4577, 2008, https://doi.org/10.1016/j.surfcoat.2008.04.044.10.1016/j.surfcoat.2008.04.044 ↗
16. A. Lekatou, D. Sioulas, A. E. Karantzalis, and D. Grimanelis, “A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC-Co powders HVOF-sprayed on Al7075,” Surf. Coat. Technol., vol. 276, pp. 539–556, 2015, https://doi.org/10.1016/j.surfcoat.2015.06.017.10.1016/j.surfcoat.2015.06.017 ↗
17. M. Magnani, et al.., “Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7,” Surf. Coat. Technol., vol. 202, pp. 4746–4757, 2008, https://doi.org/10.1016/j.surfcoat.2008.04.055.10.1016/j.surfcoat.2008.04.055 ↗
18. R. S. Ghai, K. Chen, and N. Baddour, “Modelling thermal conductivity of porous thermal barrier coatings,” Coatings, vol. 9, no. 2, pp. 1–28, 2019, https://doi.org/10.3390/coatings9020101.10.3390/coatings9020101 ↗
19. L. Wang, et al.., “Influence of pores on the thermal insulation behavior of thermal barrier coatings prepared by atmospheric plasma spray,” Mater. Des., vol. 32, no. 1, pp. 36–47, 2011, https://doi.org/10.1016/j.matdes.2010.06.040.10.1016/j.matdes.2010.06.040 ↗
20. S. Wei, F. Wang, Q. B. Fan, and Z. Ma, “Effects of defects on the effective thermal conductivity of thermal barrier coatings,” Appl. Math. Model., vol. 36, no. 5, pp. 1995–2002, 2012, https://doi.org/10.1016/j.apm.2011.08.018.10.1016/j.apm.2011.08.018 ↗
21. C. J. Li and A. Ohmori, “Relationships between the microstructure and properties of thermally sprayed deposits,” J. Therm. Spray Technol., vol. 11, no. 3, pp. 365–374, 2002, https://doi.org/10.1361/105996302770348754.10.1361/105996302770348754 ↗
22. M. P. Schmitt, A. K. Rai, R. Bhattacharya, D. Zhu, and D. E. Wolfe, “Multilayer thermal barrier coating (TBC) architectures utilizing rare earth doped YSZ and rare earth pyrochlores,” Surf. Coat. Technol., vol. 251, pp. 56–63, 2014, https://doi.org/10.1016/j.surfcoat.2014.03.049.10.1016/j.surfcoat.2014.03.049 ↗
23. M. Zhao and W. Pan, “Effect of lattice defects on thermal conductivity of Ti-doped, Y2O3-stabilized ZrO2,” Acta Mater., vol. 61, no. 14, pp. 5496–5503, 2013, https://doi.org/10.1016/j.actamat.2013.05.038.10.1016/j.actamat.2013.05.038 ↗
24. I. D. Utu, I. Hulka, and V. A. Serban, “Microstructure and abrasion wear resistance of thermally sprayed cermet coatings,” Mater. Test., vol. 55, no. 1, pp. 47–50, 2013, https://doi.org/10.3139/120.110402.10.3139/120.110402 ↗
25. C. Monticelli, A. Frignani, and F. Zucchi, “Investigation on the corrosion process of carbon steel coated by HVOF WC/Co cermets in neutral solution,” Corros. Sci., vol. 46, no. 5, pp. 1225–1237, 2004, https://doi.org/10.1016/j.corsci.2003.09.013.10.1016/j.corsci.2003.09.013 ↗
26. J. M. Guilemany, S. Dosta, J. Nin and J.R. Miguel, “Study of the properties of WC-Co nanostructured coatings sprayed by high-velocity oxyfuel,” J. Therm. Spray Technol., vol. 14, no. 3, pp. 405–413, 2005, https://doi.org/10.31399/asm.cp.itsc2005p0530.10.31399/asm.cp.itsc2005p0530 ↗