journal article·2016-06-01

Comparison of the tribological and mechanical performance for nano and micro filler epoxy composites

Iskender Özsoy, Abdullah Mimaroglu, Huseyin Unal

Materials Testing· Volume 58· Issue 6
Publisher page

Abstract

Abstract In this investigation, the tribological and mechanical performance of 10 wt.-% filled nano and micro epoxy composites were studied and compared. Nano fillers are Al2O3, TiO2 and clay and micro fillers are Al2O3, TiO2 and fly ash. Mechanical and wear tests were carried out. Wear tests were performed on pin-on-disc arrangement. Test conditions were 5, 10, 15 N applied load values, sliding speed of 0.8 m × s−1, 2000 m sliding distance under dry atmospheric conditions. The results show that the mechanical and tribological performance of micro filler filled epoxy composites are better than those of the nano filler filled composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sakarya , Turkey

References (17)

Show source-provided references
1. Effects of particle size10.1016/j.compositesb.2008.01.002 ↗
2. Mechanical properties of dental composite materials reinforced with micro and nano size Al2 O3 filler particles
3. 1994
5. Mechanical properties of micro and nano TiO2/epoxy composites, International Journal of Mining
6. Effect of particle size and weight fraction on the flexural strength and failure mode of TiO2 particles reinforced epoxy10.1016/j.matlet.2010.01.016 ↗
7. A novel epoxy resin/CaCO3 nano- composite and its mechanism of toughness improvement10.1002/mame.200500223 ↗
8. Mechanical behavior of various nanoparticle filled composites at low-velocity impact10.1016/j.compstruct.2005.03.006 ↗
9. Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO2, ZnO, CuO and SiC10.1016/j.wear.2004.08.009 ↗
10. Tribological behaviour of clay-thermoset polyester nanocomposites10.1016/S1572-3364(08)55005-1 ↗
11. Tribological properties of epoxy/rubber nanocomposites10.1016/j.triboint.2008.03.001 ↗
12. Tribological properties of epoxy nanocomposites: I – Enhancement of the wear resistance by nano-TiO2 particles10.1016/j.wear.2004.09.005 ↗
13. Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites10.1016/S0921-5093(03)00536-7 ↗
14. Unsaturated polyester nanocomposites filled with nano alumina10.1007/s10853-011-5398-7 ↗
15. Mechanical and thermal properties of unsaturated polyester/calcium carbonate nanocomposites10.1177/0731684411424630 ↗
16. Nanometre-sized TiO2 as applied to the modification of unsaturated polyester resin10.1016/S0254-0584(02)00114-1 ↗
17. The flexural and morphological properties of α-alumina filled epoxy composites