Effects of Cobalt and Nickel/Cobalt Additions to P/M 304L Stainless Steel on Oxidation Behaviour at 900 °C and Mechanical Properties
Source abstract
Abstract
Abstract This research investigated the effects of various cobalt and nickel/cobalt additions to P/M 304L stainless steel on oxidation behavior at 900 °C, hardness and bending strength. A single action press at 498 MPa was used for compacting powder mixture specimens. They were then sintered at 1300 °C for 30 minutes in hydrogen atmosphere and heat treated at 900 °C for 2, 5, 10, 20, 25, 40, 60, 80 and 100 hours in air for oxidation tests. It is clearly shown in the results that cobalt addition could improve density, hardness and bending strength. However, only 1 wt.-% Co addition was the best condition for oxidation resistance. The detrimental effect of Ni addition dominated the beneficial effect of Co addition, because its bigger powder size led to more pore formation. The resulting mechanical properties and oxidation behaviour depend on microstructures, porosity and powder size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bangkok, Thailand
References (17)
Show source-provided references
1. Stainless Steel: Specialist Course, International Stainless Steel Forum (ISSF)
2. 1997
3. 1994
4. Powder Metallurgy
5. 2007
6. Effect of particle size distribution on sintering of agglomerate-free submicron alumina powder compacts10.1016/S0955-2219(02)00009-2 ↗
7. A comparison of the effect of nickel and cobalt in steel
8. High temperature microstructural evolution of 304L stainless steel as function of pre-strain and strain rate10.1016/j.msea.2010.02.007 ↗
9. Oxidation of AISI 304 and AISI 439 stainless steels10.1016/j.msea.2006.10.022 ↗
10. Oxidation of high – temperature alloys (superalloys) at elevated temperature in air10.1007/BF01080783 ↗
11. Oxidation of stainless steel 304L in carbon dioxide10.1016/j.corsci.2010.03.022 ↗
12. Characterization of the oxides formed at 1000 °C on the AISI 304 stainless steel by X-ray diffraction and infrared spectroscopy10.1016/j.apsusc.2007.09.018 ↗
13. Effect of Co Addition to heat treated P/M 316L stainless steel on α' martensite formation and mechanical properties
14. Oxidation behaviors of electrodeposited nickel-cobalt coatings in air at 960 °C10.1016/S1003-6326(11)60821-2 ↗
15. 2007 · 19
16. 2002
17. XPS investigation of surface film on high Cr-Ni ferritic and austenitic stainless steels