Effect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloy
Source abstract
Abstract
Abstract In the present study, the effect of an La alloying element with different quantities (1, 3 and 5 wt.-%) on the microstructure, mechanical and dry sliding wear properties of Mg- 3Al-3Sn-3Sb alloy was investigated. The wear tests were done on the alloys using pin on-disk equipment against a 4140 steel disc as counterpart under three different sliding velocities of 0.3, 0.6 and 1.2 ms-1 and four different loads of 5, 10, 20 and 40 N. The microstructural results showed that the new intermetallic phases (La5Sn3 and LaSnSb2) were formed with addition of La to the main alloy. Also, it was observed that the hardness of the Mg-3Al-3Sn-3Sb alloy was raised with increasing La addition. Furthermore, the tensile properties of the Mg-3Al-3Sn-3Sb alloy improved with rising La content at room and elevated temperature. The wear rates of the alloys increase with increasing of the sliding speed and load. In addition to this, the wear rate of the Mg-3Al-3Sn-3Sb alloy was found to be higher than that of the La content alloys for all test conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mersin , Turkey
Iskenderun , Turkey
Hatay , Turkey
References (21)
Show source-provided references
1. M. Pekgüleryüz, K. U. Kainer, A. A. Kaya: Fundamentals of magnesium alloy metallurgy, 1st Ed., Woodhead Publishing Limited, Cambridge, UK (2013), pp. 184, 29010.1533/9780857097293 ↗
2. P. Poddar, S. Bagui, K. Ashok, A. P. Murugesan: Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys, Journal of Alloys and Compounds 695 (2017), pp. 895-908 DOI:1016/j.jallcom.2016.10.19310.1016/j.jallcom.2016.10.193 ↗
3. L. Zhang, Z. Y. Cao, Y. B. Liu, G. H. Su, L. R. Cheng: Effect of Al content on the micro-structures and mechanical properties of Mg-Al alloys, Journal of Materials Science and Engineering A, 508 (2009), pp. 129-133 DOI:10.1016/j.msea.2008.12.02910.1016/j.msea.2008.12.029 ↗
4. H. Friedrich, B. L. Mordike: Magnesium technology, 1st Ed., Springer, Verlag Berlin, Germany (2006), pp. 126, 243
5. M. Pekgüleryüz, A. A. Kaya: Creep resistant magnesium alloys for powertrain applications, Advanced Engineering Materials 5 (2003), pp. 866-878 DOI:10.1002/adem.200300403.10.1002/adem.200300403 ↗
6. H. Friedrich, S. Schumann: Research for a “new age of magnesium” in the automotive industry, Journal of Materials Processing Technology 117 (2001), pp. 276-281 DOI:10.1016/S0924-0136(01)00780-410.1016/S0924-0136(01)00780-4 ↗
7. S. Zhu, T. Luo, Y. Li, Y. Yang: Characterization the role of squeeze pressure on microstructure, tensile properties and failure mode of a new Mg-6Zn-4Al-0.5Cu magnesium alloy, Journal of Alloys and Compounds 718 (2017), pp. 188-196 DOI:10.1016/j.jallcom.2017.05.11510.1016/j.jallcom.2017.05.115 ↗
8. K. N. B. Malik: Effect of high pressure die casting on structure and properties of Mg-5Al-0.4Mn-xRE (x = 1, 3 and 5 wt.-%) experimental alloys, Journal of Alloys and Compounds 694 (2017), pp. 841-847 DOI:10.1016/j.jallcom.2016.10.03310.1016/j.jallcom.2016.10.033 ↗
9. J. Gavras, S. M. Zhu, J. F. Nie, M. A. Gibson, M. A. Easton: On the microstructural factors affecting creep resistance of die-cast Mg-La-rare earth (Nd, Y and Gd) alloys, Materials Science and Engineering A, 675 (2016), pp. 65-75 DOI:10.1016/j.msea.2016.08.04610.1016/j.msea.2016.08.046 ↗
10. J. Zhang, Leng Z, Zhang M, Meng J, Wu R: Effect of Ce on microstructure, mechanical properties and corrosion behaviour of high-pressure die-cast Mg-4Al alloy, Journal of Alloys and Compounds 509 (2011), pp. 1069-1078 DOI:10.1016/j.jallcom.2010.09.18510.1016/j.jallcom.2010.09.185 ↗
11. J. An, R. G. Li, Y. Lu, C. Chen, Y. Xu, X. Chen, L. Wang: Dry sliding wear behaviour of magnesium alloy, Wear 265 (2008), pp. 97-104 DOI:10.1016/j.wear.2007.08.02110.1016/j.wear.2007.08.021 ↗
12. S. Garcia-Rodriguez, B. Torres, A. Maroto, A. J. Lopez, E. Otero, J. Rams: Dry sliding wear behaviour of globular AZ91 magnesium alloy and AZ91/SiCp composites, Wear 390 (2017), pp. 1-10 DOI:10.1016/j.wear.2017.06.01010.1016/j.wear.2017.06.010 ↗
13. B. Selvam, P. Marimuthu, R. Narayanasamy, V. Anandakrishnan, K. S. Tun, M. Gupta, M. Kamaraj: Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano-composites, Materials and Design 58 (2014), pp. 475-481 DOI:10.1016/j.matdes.2014.02.00610.1016/j.matdes.2014.02.006 ↗
14. R. T. Prabhu: Effect of synthetic graphite and activated charcoal addition on the mechanical, microstructure and wear properties of AZ81 Mg alloys, Journal of Materials Research Technology 5 (2016), pp. 259-267 DOI:10.1016/j.jmrt.2015.12.00110.1016/j.jmrt.2015.12.001 ↗
15. A. Zafari, H. Ghasemi, R. Mahmudi: An investigation on the tribological behaviour of AZ91 and AZ91 + 3 wt.-% RE magnesium alloys at elevated temperatures, Materials and Design 54 (2014), pp. 544-552 DOI:10.1016/j.matdes.2013.08.07310.1016/j.matdes.2013.08.073 ↗
16. H. Chen, A. T. Alpas: Sliding wear map for the magnesium alloy Mg-9Al-0.9Zn (AZ91), Wear 246 (2000), pp. 106-116 DOI:10.1016/S0043-1648(00)00495-610.1016/S0043-1648(00)00495-6 ↗
17. C. Taltavull, P. Rodrigo, B. Torres, A. J. Lopez, J. Rams: Dry sliding wear behaviour of AM50B magnesium alloy, Materials and Design 56 (2014), pp. 549-556 DOI:10.1016/j.matdes.2013.12.01510.1016/j.matdes.2013.12.015 ↗
18. A. J. Lopez, P. Rodrigo, B. Torres, J. Rams: Dry sliding wear behaviour of ZE41A magnesium alloy, Wear 271 (2011), pp. 2836-2844 DOI:10.1016/j.wear.2011.05.04310.1016/j.wear.2011.05.043 ↗
19. R. Rajeskumar, J. Jayaraj, A. Srinivasan, U. T. S. Pillai: Investigation on the microstructure, mechanical properties and corrosion behaviour of Mg-Sb and Mg-Sb-Si alloys, Journal of Alloys and Compounds 691 (2017), pp. 81-88 DOI:10.1016/j.jallcom.2016.08.21910.1016/j.jallcom.2016.08.219 ↗
20. R. Alizadeh, R. Mahmudi: Effect of Sb additions on the microstructural stability and mechanical properties of cast Mg-4Zn alloy, Materials Science and Engineering A 527 (2010), pp. 5312-5317 DOI:10.1016/j.msea.2010.05.02910.1016/j.msea.2010.05.029 ↗
21. G. Nayyeri, R. Mahmudi, F. Salehi: The micro-structure, creep resistance, and high-temperature mechanical properties of Mg-5Sn alloy with Ca and Sb additions, and aging treatment, Materials Science and Engineering A 527 (2010), pp. 5353-5359 DOI:10.1016/j.msea.2010.05.04010.1016/j.msea.2010.05.040 ↗