journal article·2022-07-29

Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique

N. Vinoth Babu, N. Venkateshwaran, N. Rajini, Sikiru Oluwarotimi Ismail, Faruq Mohammad, Hamad A. Al-Lohedan, Siengchin Suchart

Materials Technology· Volume 37· Issue 9
Publisher page

Abstract

This present study focuses on evaluation of mechanical properties of three dimensional (3D)-printed carbon fiber/polylactic acid (CF/PLA) composites, using fused deposition modeling (FDM) technique. The composites were prepared with different slicing parameters: layer heights or thicknesses, infill densities and layer patterns. The 3D-printed composite samples were subjected to tensile, flexural and interlaminar shear strength (ILSS) tests to assess the influence of the process parameters on their mechanical characteristics. Further investigations were carried out to evaluate the effect of surface roughness of the samples. From the test results, it was evident that both rectilinear and hexagonal layer patterns exhibited better mechanical properties at infill density and layer thickness of 60% and 0.64 mm, respectively. The scanning electron microscopy (SEM) images depicted that lesser layer thickness produced poor CF/PLA interfacial bonding and major failure mode was traced to fiber pull-out. Therefore, engineering application of the composite samples depends on their slicing parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Rajalakshmi Engineering College, Chennai, TamilNadu, India

Centre for Composite Materials, Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Tamil Nadu, India

Centre for Engineering Research, Department of Engineering, School of Physics, Engineering and Computer Science, University of Hertfordshire, Hatfield, UK

Surfactants Research Chair, Department of Chemistry, College of Science, King Saud University, Riyadh, Kingdom of Saudi Arabia

Department of Materials and Production Engineering, The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand

References (41)

Show source-provided references
1. 10.1016/j.mattod.2017.07.00110.1016/j.mattod.2017.07.001 ↗
2. Astm F. · 2015
3. 10.1016/j.cad.2015.04.00110.1016/j.cad.2015.04.001 ↗
4. 10.1016/j.polymertesting.2014.04.00110.1016/j.polymertesting.2014.04.001 ↗
5. Gokhare VG · Int J Eng Res Technol · 2017 · 6 · 953
6. 10.3390/ma1010119910.3390/ma10101199 ↗
7. 10.1115/1.403399410.1115/1.4033994 ↗
8. 10.1016/j.matdes.2017.03.00510.1016/j.matdes.2017.03.005 ↗
9. 10.1007/s00170-018-2148-x10.1007/s00170-018-2148-x ↗
10. 10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
11. 10.3390/ma1107119110.3390/ma11071191 ↗
12. 10.1007/s11665-018-3784-x10.1007/s11665-018-3784-x ↗
13. Magdum Y · Int Res J Eng Technol · 2019 · 6 · 1
14. Vikas B · Int J Eng Dev Res · 2019 · 7 · 2321
15. 10.1007/s00170-019-03532-510.1007/s00170-019-03532-5 ↗
16. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
17. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
18. 10.1038/srep2305810.1038/srep23058 ↗
19. Fernandes J · 2018 · 14
20. 10.3390/polym1105079910.3390/polym11050799 ↗
21. 10.1080/1023666X.2019.163094010.1080/1023666X.2019.1630940 ↗
22. 10.1177/073168441986801810.1177/0731684419868018 ↗
23. Sudin MN · J Eng Appl Sci · 2016 · 11 · 8067
24. 10.1631/jzus.A100136510.1631/jzus.A1001365 ↗
25. Dyrbuś G · 2010 · 11
26. 10.1016/j.procir.2015.04.01410.1016/j.procir.2015.04.014 ↗
27. Habeeb HA · 2016
28. 10.1016/j.jmatprotec.2012.11.01110.1016/j.jmatprotec.2012.11.011 ↗
29. 10.1108/1355254031050218510.1108/13552540310502185 ↗
30. 10.3139/120.11117810.3139/120.111178 ↗
31. 10.3390/ma1108138210.3390/ma11081382 ↗
32. 10.3390/ma1223383410.3390/ma12233834 ↗
33. Kumar K · Mat.Tech · 2017
34. Naveed N · Mat.Tech · 2020
35. Ozbay B · Mat.Tech · 2020
36. Modi YK · Mat.Tech · 2020 · 1
37. 10.1080/10667857.2018.146707110.1080/10667857.2018.1467071 ↗
38. 10.1177/073168442093843410.1177/0731684420938434 ↗
39. 10.1016/j.addma.2017.06.00410.1016/j.addma.2017.06.004 ↗
40. 10.3390/polym1107109410.3390/polym11071094 ↗
41. 10.1002/pc.2497110.1002/pc.24971 ↗