journal article·2020-12-05

Investigation into the manufacturing process and properties of BrAl10Fe4 Aluminium-bronze parts by selective laser melting

Yuan Zhang, Yan Yin

Materials Technology· Volume 35· Issue 13-14
Publisher page

Abstract

An orthogonal experiment with four factors and three levels is designed to investigate the manufacturing technology and properties of BrAlFe4 aluminium-bronze parts by selective laser melting. Through orthogonal experiment and signal-to-noise ratio analysis, the optimal technological parameters are as follows: laser power 450W, scanning speed 1700mm/s, thickness 30μm, scanning space 60μm. The density of aluminium-bronze parts can reach a maximum of 98.94%. The micro-structure of aluminium-bronze parts is network dendritic structure in which the α phase and (α+ γ2) precipitated phase are uniformly distributed. The micro-hardness can reach 384.1HV,90% higher than traditional casting parts (200HV). The surface roughness of aluminium bronze formed directly by Selective Laser Melting technology is 8.911μm. Through the tensile test at room temperature, the tensile strength of aluminium bronze part reaches 575-595MPa, which is higher than casting parts (490-540MPa). And it’s a typical brittle fracture, from which clear river patterns and cleavage steps can be observed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, LanZhou University of Technology, GanSu, China

Funding

Innovation team on advanced manufactureing technology of knife and scissor

References (29)

Show source-provided references
1. Yang YQ, Wu W. Manufacturing change design:3d printing direct manufacturing technology. Beijing: China Science and Technology Press; 2014. p. 145.
2. Wang M · Mater Technol · 2016 · 31
3. 10.1179/1753555715Y.000000007610.1179/1753555715Y.0000000076 ↗
4. 10.1166/jbt.2014.123210.1166/jbt.2014.1232 ↗
5. 10.1002/jbm.a.3566410.1002/jbm.a.35664 ↗
6. 10.1002/adfm.20157030510.1002/adfm.201570305 ↗
7. 10.1016/j.corsci.2005.05.05310.1016/j.corsci.2005.05.053 ↗
8. 10.1016/j.jallcom.2017.11.02010.1016/j.jallcom.2017.11.020 ↗
9. Sercombe TB · Mater Technol · 2016 · 31 · 77
10. 10.1179/1753555715Y.000000008110.1179/1753555715Y.0000000081 ↗
11. Weast RC · 1997
12. 10.1016/j.jmatprotec.2010.09.01910.1016/j.jmatprotec.2010.09.019 ↗
13. Structure LS · Mater Technol · 2016 · 31
14. Wang X · Appl Surf Sci · 2016
15. 10.1016/j.msea.2018.02.05110.1016/j.msea.2018.02.051 ↗
16. 10.1016/j.cirp.2018.04.09610.1016/j.cirp.2018.04.096 ↗
17. Gu D · Chin J Nonferrous Metals · 2005 · 15
18. Ventura AP · Metall Mater Trans A · 2016 · 48 · 1
19. He Z · Mech Des · 1999 · 1
20. Su Y · Special Casting Nonferrous Alloys · 2006 · 26
21. Lu JP, Li XH. Phase diagram spectra of processing copper and copper alloys. ChangSha: Central South University Press; 2010. p. 300.
22. Li Y · J Tribol · 1996 · 16 · 130
23. 10.1016/j.actamat.2017.07.04510.1016/j.actamat.2017.07.045 ↗
24. 10.1016/j.matdes.2009.01.01310.1016/j.matdes.2009.01.013 ↗
25. Wu W · J South China Univer Technol (Natural Science Edition) · 2010 · 38
26. Huang W · 2007
27. 10.1007/s00170-014-6297-210.1007/s00170-014-6297-2 ↗
28. Na SS, Li J, Ai LQ. Mechanical properties of metal materials . Beijing: Metallurgical Industry Press; 2011. p. 220.
29. Serratos M · AFS Trans · 2000 · 108 · 719