journal article·2019-07-29

Effects of nano-bioactive glass on structural, mechanical and bioactivity properties of Poly (3-hydroxybutyrate) electrospun scaffold for bone tissue engineering applications

Razieh Iron, Mehdi Mehdikhani, Elham Naghashzargar, Saeed Karbasi, Dariush Semnani

Materials Technology· Volume 34· Issue 9
Publisher page

Abstract

3-D nanocomposite scaffolds have recently had wide applications in bone tissue engineering. In this study, 58S bioactive glass nanoparticles (nBGs) were synthetized using sol-gel method and characterized. According to the results, the size of nanoparticles was achieved less than 100 nm. In the following step, Poly (3-hydroxybutyrate) (P3HB) was reinforced with 7.5, 10 and 15 %wt. of nBGs. Then, nanocomposite scaffolds were prepared by electrospinning technique and the structure was characterized structurally and mechanically. The results show that nanocomposite scaffolds have interconnected porosity with proper distribution and interaction of nBGs with polymeric nanofibres. Finally, The bioactivity of the optimized scaffold was evaluated by soaking in the simulated body fluid for 21 days and results obtained the P3HB/nBG electrospun scaffolds are bioactive as the apatite layer was observed on the surface of the fibres. To sum up, P3HB/nBG electrospun scaffold could be a very good candidate for bone tissue engineering applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of New Science and Technology Compose (Biomaterial Group), Semnan University, Semnan, Iran

Department of Biomedical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran

Department of Textile Engineering, Engineering faculty, University of Bonab, Bonab Iran

Department of Biomaterials and Tissue Engineering, School of Advance Technology in Medicine, Isfahan University of Medical Sciences, Isfahan, Iran

Department of Textile Engineering, Isfahan University of Technology, Isfahan, Iran

References (30)

Show source-provided references
1. 10.5301/jabfm.500021610.5301/jabfm.5000216 ↗
2. 10.3390/ma907052310.3390/ma9070523 ↗
3. 10.1089/ten.2006.12.119710.1089/ten.2006.12.1197 ↗
4. 10.1016/j.biomaterials.2016.11.01810.1016/j.biomaterials.2016.11.018 ↗
5. 10.1016/j.msec.2016.10.05510.1016/j.msec.2016.10.055 ↗
6. 10.1586/17434440.2.1.8710.1586/17434440.2.1.87 ↗
7. 10.1177/088532821770960810.1177/0885328217709608 ↗
8. 10.1016/j.carbon.2017.02.01310.1016/j.carbon.2017.02.013 ↗
9. 10.2147/IJN.S15474810.2147/IJN.S154748 ↗
10. 10.1016/j.ijbiomac.2018.01.08910.1016/j.ijbiomac.2018.01.089 ↗
11. 10.1016/j.msec.2011.11.01310.1016/j.msec.2011.11.013 ↗
12. 10.1007/s10856-010-4075-810.1007/s10856-010-4075-8 ↗
13. 10.3390/membranes803006210.3390/membranes8030062 ↗
14. 10.1016/j.biomaterials.2009.12.04510.1016/j.biomaterials.2009.12.045 ↗
15. 10.1016/j.actbio.2009.12.05410.1016/j.actbio.2009.12.054 ↗
16. 10.1016/j.ceramint.2011.03.00910.1016/j.ceramint.2011.03.009 ↗
17. 10.1177/026361741770063710.1177/0263617417700637 ↗
18. 10.1002/jbm.a.3267810.1002/jbm.a.32678 ↗
19. 10.1016/j.cej.2013.05.09110.1016/j.cej.2013.05.091 ↗
20. 10.1016/j.msec.2013.08.01210.1016/j.msec.2013.08.012 ↗
21. 10.1016/j.eurpolymj.2014.03.02010.1016/j.eurpolymj.2014.03.020 ↗
22. 10.1016/j.matlet.2006.11.04810.1016/j.matlet.2006.11.048 ↗
23. Kumar S MA. Thesis., National Institute of Technology, Rourkela, Orissa, 2009.
24. 10.1002/app.2694910.1002/app.26949 ↗
25. Hench LL · 1993 · 1
26. 10.1016/j.jnoncrysol.2007.09.00710.1016/j.jnoncrysol.2007.09.007 ↗
27. 10.1002/crat.20041038910.1002/crat.200410389 ↗
28. 10.1002/app.3262010.1002/app.32620 ↗
29. 10.1016/S0032-3861(02)00615-810.1016/S0032-3861(02)00615-8 ↗
30. Nielsen LE, Landel RF. Mechanical Properties of Polymers and Composites, New York: Marcel Dekker; 1994.10.1201/b16929 ↗