Thermal retardant properties of textiles impregnated with ceramic powder
Source abstract
Abstract
Heat retardant materials have gained more attention in protection and industrial applications. Different methods have been proposed and designed to produce heat retardant fabric, including aluminised fibreglass, non-woven composites, metal matrix composites, etc. The main challenges for this type of materials are mainly flexibility, weight and cost. Using fabric consisting of natural fibres allows the composite materials to have good flexibility, low weight and lower cost simultaneously. The main purpose of this research is to reduce heat transfer through textiles by impregnating them with ceramic material powder. The material used is a solution that included ceramic material powder, a kind of wax and its solvent. To measure the heat transfer rate for primary and impregnated samples, a guarded hot plate with accuracy of ±1°C was designed and manufactured. The temperature of the cold surface of the fabric was measured using an infrared thermometer Fluke 62. Three kinds of ceramic powder were used, i.e. silicon oxide (SiO2), kaolin (aluminium silicate Al2O3.2SiO2.2H2O) and silicon carbide (SiC). The results show that by increasing the amount of ceramic materials, heat transfer reduces. The results also revealed that SiC is more heat retardant in comparison to the other two. Silicon oxide is the second order. The heat retardant property of multilayer fabrics, including a thin aluminium layer, was also studied. It is observed that the delay in the heat transfer rate increases notably. This multilayer textile could reduce from 100°C on the hot plate to ∼50°C on the cold side.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations · Radiative Heat Transfer Studies · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. 10.1007/s10692-006-0053-910.1007/s10692-006-0053-9 ↗
2. 10.1007/s10694-005-3733-810.1007/s10694-005-3733-8 ↗
3. 10.1007/s10765-007-0279-710.1007/s10765-007-0279-7 ↗
4. Hirschler MM · Int. J. Thermophys. · 1997 · 21 · 115
5. Frydrych I · Fibres Text. East. Eur. · 2002 · 40
6. 10.1140/epjst/e2008-00413-910.1140/epjst/e2008-00413-9 ↗
7. 10.1016/j.ijthermalsci.2006.12.00210.1016/j.ijthermalsci.2006.12.002 ↗
8. Schomburg C · 1982
9. 10.1016/j.polymertesting.2007.08.00310.1016/j.polymertesting.2007.08.003 ↗
10. 10.1016/j.polymdegradstab.2004.02.02410.1016/j.polymdegradstab.2004.02.024 ↗
11. 10.1002/9780470291238.ch3510.1002/9780470291238.ch35 ↗
12. Ziegler S · Fibres Text. East. Eur. · 2006 · 14 · 103
13. 10.1177/004051750708352410.1177/0040517507083524 ↗
14. ‘Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus’, C177-97, ASTM, West Conshohocken, PA, USA, 1997, 20–30