Microstructure and characteristics of rapid sintered low friction, wear resistant 80Ni20Cr–Cr2O3–Ag–BaF2/CaF2coating
Source abstract
Abstract
A PM304 composite coating comprising a 80Ni20Cr matrix (60 wt-%) containing Cr2O3 (20%), Ag (10%) and eutectic BaF2/CaF2 (10%) as wear resistant or solid lubricant additives, designed for operation up to 650°C, has been successfully prepared by cold isostatic pressing milled powder onto a Ni based superalloy rod and rapid induction sintering. The size of Cr2O3 and BaF2/CaF2 particles was <1 μm, and that of Ag particles <5 μm. The relative density of the PM304 coating was found to be 90%, and its microhardness was 530 MPa. Friction tests at 25°C indicated that the friction coefficient and wear rate of PM304 are 0·41 and 4·2 × 10−4 mm3 N−1 m−1 respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. 10.1080/1040200030898263810.1080/10402000308982638 ↗
2. Wang W. C. · Surf Coat. Technol · 2004 · 12
3. 10.1080/1040200000898233710.1080/10402000008982337 ↗
4. 10.1016/j.compositesa.2006.03.01110.1016/j.compositesa.2006.03.011 ↗
5. 10.1016/0956-7151(92)90212-W10.1016/0956-7151(92)90212-W ↗
6. 10.1111/j.1151-2916.1989.tb09718.x10.1111/j.1151-2916.1989.tb09718.x ↗