journal article·2021-03-21

New insights into the role of Al2O3 nano-supplements in mechanical performance of PMMA and PMMA/HA bone cements using nanoindentation and nanoscratch measurements

Hadi Asgharzadeh Shirazi, Majidreza Ayatollahi, Mahdi Navidbakhsh, Alireza Asnafi

Materials Technology· Volume 36· Issue 4
Publisher page

Abstract

This work was performed to investigate the mechanical and tribological properties of polymethyl methacrylate (PMMA)-based bone cement strengthened by nano-alumina (Al2O3) and nano-hydroxyapatite (HA) particles. Seven cement groups with different amounts of Al2O3 (3 and 5 wt. %) and HA (5 and 10 wt. %) nano-particles were prepared and the nanoindentation and nanoscratch tests were employed to obtain the results. Substantial improvement/reduction in mechanical properties was observed for the addition of 3 wt. % of Al2O3 /5 wt. % of Al2O3 plus 10 wt. % of HA into the PMMA matrix. The additives had almost no obvious effects on the friction of PMMA (~0.3). This research revealed that only the specific weight percent of Al2O3 (here 3 wt. %), compared to other PMMA/Al2O3 and PMMA/HA/Al2O3 cement nanocomposites, had great potential as an added component in PMMA bone cement to provide a significant increase in the mechanical properties of the cement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fatigue and Fracture Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

Tissue Engineering and Biological Systems Research Laboratory, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

School of Mechanical Engineering, Shiraz University, Shiraz, Iran

References (43)

Show source-provided references
1. 10.3928/01477447-20151222-0410.3928/01477447-20151222-04 ↗
2. 10.1016/j.polymertesting.2017.01.03110.1016/j.polymertesting.2017.01.031 ↗
3. 10.1016/S0142-9418(03)00073-410.1016/S0142-9418(03)00073-4 ↗
4. 10.1016/S0142-9612(00)00334-310.1016/S0142-9612(00)00334-3 ↗
5. 10.1016/S0142-9612(01)00088-610.1016/S0142-9612(01)00088-6 ↗
6. 10.1163/15685620332255349110.1163/156856203322553491 ↗
7. Opara TN · J Mater Sci · 2003 · 14 · 277
8. 10.1016/j.matchemphys.2009.03.01910.1016/j.matchemphys.2009.03.019 ↗
9. 10.1016/j.compscitech.2003.09.00110.1016/j.compscitech.2003.09.001 ↗
10. 10.1007/s11665-015-1593-z10.1007/s11665-015-1593-z ↗
11. 10.1016/j.ceramint.2015.05.02110.1016/j.ceramint.2015.05.021 ↗
12. 10.1080/10667857.2015.110557710.1080/10667857.2015.1105577 ↗
13. Thamaraiselvi T · Carbon · 2004 · 24 · 172
14. 10.1080/10667857.2004.1175308910.1080/10667857.2004.11753089 ↗
15. 10.1002/jbm.a.3139310.1002/jbm.a.31393 ↗
16. 10.1016/j.actamat.2004.06.00310.1016/j.actamat.2004.06.003 ↗
17. 10.1016/j.actamat.2007.12.05110.1016/j.actamat.2007.12.051 ↗
18. 10.1016/j.polymertesting.2012.06.00210.1016/j.polymertesting.2012.06.002 ↗
19. 10.1179/1753555713Y.000000011110.1179/1753555713Y.0000000111 ↗
20. 10.1016/j.msea.2011.05.06810.1016/j.msea.2011.05.068 ↗
21. 10.1016/j.msea.2012.10.01510.1016/j.msea.2012.10.015 ↗
22. 10.1016/j.msea.2017.01.09610.1016/j.msea.2017.01.096 ↗
23. 10.1016/j.ceramint.2014.01.13110.1016/j.ceramint.2014.01.131 ↗
24. 10.1016/j.ceramint.2019.02.12810.1016/j.ceramint.2019.02.128 ↗
25. 10.1016/S1672-6529(07)60007-910.1016/S1672-6529(07)60007-9 ↗
26. 10.1016/j.scriptamat.2010.07.04110.1016/j.scriptamat.2010.07.041 ↗
27. 10.1007/s11661-012-1360-910.1007/s11661-012-1360-9 ↗
28. 10.1016/j.msea.2005.05.03110.1016/j.msea.2005.05.031 ↗
29. 10.1002/pen.2064310.1002/pen.20643 ↗
30. 10.1016/j.actamat.2004.08.00210.1016/j.actamat.2004.08.002 ↗
31. 10.1016/j.msea.2005.03.02810.1016/j.msea.2005.03.028 ↗
32. 10.1016/j.msea.2005.11.02710.1016/j.msea.2005.11.027 ↗
33. 10.1002/jbm.a.3222310.1002/jbm.a.32223 ↗
34. 10.1007/s11837-007-0089-110.1007/s11837-007-0089-1 ↗
35. 10.1097/00003086-199811000-0002210.1097/00003086-199811000-00022 ↗
36. ISO 14577, Metallic Materials – instrumented Indentation Test for Hardness and Materials Parameters – part 1: test Method, International Organization for Standardization, 2002.
37. 10.1557/jmr.2004.19.1.310.1557/jmr.2004.19.1.3 ↗
38. 10.1016/0020-7225(65)90019-410.1016/0020-7225(65)90019-4 ↗
39. 10.1016/0301-679X(95)00045-610.1016/0301-679X(95)00045-6 ↗
40. 10.1179/09506600322501022710.1179/095066003225010227 ↗
41. 10.1016/j.matdes.2015.07.06910.1016/j.matdes.2015.07.069 ↗
42. 10.1016/j.acme.2017.06.00110.1016/j.acme.2017.06.001 ↗
43. 10.1002/jbm.b.3016610.1002/jbm.b.30166 ↗