Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM)
Source abstract
Abstract
One of the most significant parameters of the Fused Deposition Modelling (FDM) for 3D printing process is the raster angle. In this study, the five different raster angles are used to fabricate the 3D parts using thermoplastic material - polylactic acid (PLA), and tensile properties of these parts are investigated to identify the best raster position to fabricate the strongest 3D printing part. In this study, the microstructural analyses on fracture interface, and on outer and inner surfaces of these 3D parts are performed using a scanning electron microscopy (SEM) to examine material failure modes and reasons, and defects in the 3D parts. This study identified the best raster orientation to lie down the layers of 3D printing material during the process. This study also identified that there are several defects in 3D printed parts at micro level that have large impact on mechanical properties of 3D printed part.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Technology, University of Sunderland, Sunderland, UK
References (39)
Show source-provided references
1. 10.1016/j.precisioneng.2017.05.01510.1016/j.precisioneng.2017.05.015 ↗
2. Gupta N · 2012
3. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
4. 10.1016/j.colsurfb.2016.09.05010.1016/j.colsurfb.2016.09.050 ↗
5. 10.1016/j.dental.2016.11.00510.1016/j.dental.2016.11.005 ↗
6. 10.1016/j.jmapro.2009.03.00210.1016/j.jmapro.2009.03.002 ↗
7. 10.1016/j.bushor.2014.11.00510.1016/j.bushor.2014.11.005 ↗
8. Lipson H, Kurman M. Fabricated: the new world of 3D printing. Indianapolis, Ind.: John Wiley & Sons; 2013.
9. 10.1166/jbt.2014.123210.1166/jbt.2014.1232 ↗
10. 10.1002/jbm.a.3596310.1002/jbm.a.35963 ↗
11. 10.1002/biot.20060008110.1002/biot.200600081 ↗
12. 10.1155/2014/82914510.1155/2014/829145 ↗
13. 10.1089/10763270275350300910.1089/107632702753503009 ↗
14. 10.1080/09506608.2015.112831010.1080/09506608.2015.1128310 ↗
15. 10.1002/jbm.a.3580910.1002/jbm.a.35809 ↗
16. 10.1002/jbm.a.3566410.1002/jbm.a.35664 ↗
17. 10.1039/C7MH00043J10.1039/C7MH00043J ↗
18. 10.1016/j.jclepro.2016.11.13910.1016/j.jclepro.2016.11.139 ↗
19. 10.1016/j.addma.2014.08.00510.1016/j.addma.2014.08.005 ↗
20. Kai CC · 2003
21. 10.1016/j.actamat.2018.02.06010.1016/j.actamat.2018.02.060 ↗
22. 10.1179/1753555715Y.000000007610.1179/1753555715Y.0000000076 ↗
23. 10.1109/INES.2012.624980510.1109/INES.2012.6249805 ↗
24. 10.2478/amm-2013-018610.2478/amm-2013-0186 ↗
25. 10.1108/RPJ-09-2014-013510.1108/RPJ-09-2014-0135 ↗
26. 10.1016/j.addma.2015.09.00610.1016/j.addma.2015.09.006 ↗
27. 10.1002/app.3864210.1002/app.38642 ↗
28. 10.1016/j.carbpol.2011.11.07810.1016/j.carbpol.2011.11.078 ↗
29. Hafsa MN · Appl Mech Mater · 2014 · 465 · 55
30. Comb J · 1994
31. 10.1016/j.apsusc.2017.01.11210.1016/j.apsusc.2017.01.112 ↗
32. 10.1007/s40436-014-0097-710.1007/s40436-014-0097-7 ↗
33. 10.1108/1355254061065244710.1108/13552540610652447 ↗
34. 10.1016/j.matdes.2009.06.01610.1016/j.matdes.2009.06.016 ↗
35. 10.1109/ISBEIA.2011.608881110.1109/ISBEIA.2011.6088811 ↗
36. 10.3390/ma1108133310.3390/ma11081333 ↗
37. 10.1115/IMECE2014-3937910.1115/IMECE2014-39379 ↗
38. GoPrint3D - 3D Printer Specialists. [Online]. [cited 2019 Dec 17]. Available: https://www.goprint3d.co.uk.
39. ASTM Standard D638, 2010, Standard test methods for tensile properties of plastics, ASTM International, West Conshohocken, PA, 2010.