Microalloying effect of Si on mechanical properties of Ti based bulk metallic glass
Source abstract
Abstract
The (Ti40Zr10Cu36Pd14)100 − xSix (x = 0, 0·5, 1·0, 1·5) bulk metallic glass (BMG) rods with a diameter of 2–4 mm have been successfully fabricated by suction casting method and characterised. The X-ray diffraction results reveal that these entire (Ti40Zr10Cu36Pd14)100 − xSix alloy rods exhibit a typical amorphous diffraction pattern with only a broad maximum at 2θ∼40°. The optimum glass forming ability values γ and γm (0·430 and 0·774 respectively) occur at the (Ti40Zr10Cu36Pd14)99·5Si0·5 amorphous alloy. This suggests that the Si element present a positive effect on increasing glass forming ability in the Ti40Zr10Cu36Pd14 alloy system. The hardness of these Ti based BMGs exhibits an increasing trend with Si addition and saturated ∼710 HV. In addition, the result of compression test shows that the optimum mechanical property occurs at the (Ti40Zr10Cu36Pd14)99·5Si0·5 amorphous alloy, which presents 2050 MPa fracture strength and 8% failure strain.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 10.2320/matertrans1989.31.17710.2320/matertrans1989.31.177 ↗
2. 10.1016/S1359-6454(99)00300-610.1016/S1359-6454(99)00300-6 ↗
3. Wang W. H. · Mater. Sci. Eng. R · 2004 · 44 · 4510.1016/j.mser.2004.03.001 ↗
4. 10.1016/j.actamat.2010.11.02710.1016/j.actamat.2010.11.027 ↗
5. 10.1016/j.actamat.2007.01.05210.1016/j.actamat.2007.01.052 ↗
6. 10.1557/mrs2007.12510.1557/mrs2007.125 ↗
7. 10.1146/annurev.matsci.38.060407.13022610.1146/annurev.matsci.38.060407.130226 ↗
8. SuryanarayanaC. and InoueA. ‘Bulk metallic glasses’; 2011, Boca Raton, FL, CRC Press (Taylor & Francis Group).
9. 10.1016/0891-5849(94)00159-H10.1016/0891-5849(94)00159-H ↗
10. 10.1016/j.msea.2007.01.04410.1016/j.msea.2007.01.044 ↗
11. 10.1016/j.intermet.2008.05.00410.1016/j.intermet.2008.05.004 ↗
12. 10.1016/j.msec.2008.07.00910.1016/j.msec.2008.07.009 ↗
13. 10.1016/S0966-9795(02)00140-110.1016/S0966-9795(02)00140-1 ↗
14. 10.1016/j.intermet.2004.07.03410.1016/j.intermet.2004.07.034 ↗
15. 10.1063/1.36798110.1063/1.367981 ↗
16. 10.2320/matertrans.45.322310.2320/matertrans.45.3223 ↗
17. 10.1016/j.pmatsci.2006.07.00310.1016/j.pmatsci.2006.07.003 ↗
18. 10.1016/S1359-6454(02)00166-010.1016/S1359-6454(02)00166-0 ↗
19. 10.1016/S0966-9795(02)00131-010.1016/S0966-9795(02)00131-0 ↗
20. 10.1016/j.matchemphys.2004.07.01510.1016/j.matchemphys.2004.07.015 ↗
21. 10.1016/j.jnoncrysol.2005.11.00410.1016/j.jnoncrysol.2005.11.004 ↗
22. 10.1016/j.intermet.2006.01.01210.1016/j.intermet.2006.01.012 ↗
23. 10.1016/j.msea.2006.02.39510.1016/j.msea.2006.02.395 ↗
24. 10.1016/j.intermet.2008.09.00910.1016/j.intermet.2008.09.009 ↗
25. 10.1016/j.jallcom.2008.11.13510.1016/j.jallcom.2008.11.135 ↗
26. 10.1016/j.intermet.2009.05.00410.1016/j.intermet.2009.05.004 ↗
27. 10.1080/0010751690820440510.1080/00107516908204405 ↗
28. 10.1016/j.intermet.2004.04.03210.1016/j.intermet.2004.04.032 ↗
29. Du X. H. · J. Appl. Phys · 2007 · 101 · 086108-1
30. 10.1103/PhysRevLett.94.20550110.1103/PhysRevLett.94.205501 ↗
31. 10.1063/1.217147210.1063/1.2171472 ↗
32. 10.1016/j.jallcom.2006.01.02110.1016/j.jallcom.2006.01.021 ↗
33. 10.1063/1.218751610.1063/1.2187516 ↗
34. 10.1063/1.279038010.1063/1.2790380 ↗
35. 10.1016/j.scriptamat.2007.03.00810.1016/j.scriptamat.2007.03.008 ↗
36. 10.1016/j.intermet.2009.01.01910.1016/j.intermet.2009.01.019 ↗
37. 10.1063/1.208112410.1063/1.2081124 ↗
38. 10.1016/j.jallcom.2011.01.20910.1016/j.jallcom.2011.01.209 ↗