journal article·2022-08-24

Green synthesis of ITO nanoparticles using Carica papaya seed extract: impact of annealing temperature on microstructural and electrical properties of ITO thin films for sensor applications

S. Mala, H.K.E. Latha, A. Udayakumar, H.S. Lalithamba

Materials Technology· Volume 37· Issue 10
Publisher page

Abstract

This paper reports the synthesis of indium tin oxide (ITO) nanoparticles and the effect of annealing temperature on the microstructural and electrical properties of ITO thin films. The synthesized ITO (90:10) nanoparticles are deposited at 29°C using E beam evaporation to form ITO thin films and annealed at 200, 400 and 500°C. The microstructural properties are investigated using XRD and AFM , and electrical properties such as temperature coefficient of resistance (TCR) and gauge factor are investigated using four-probe and four-point beam bending method, respectively. The investigations results reveal an increase in grain size, carrier concentration and gauge factor with an increase in the annealing temperature. The absolute value of TCR is constant at high temperatures for the film annealed at 500°C. The ITO thin film annealed at 500°C shows improved morphological and electrical properties and can be used for the development of sensors operating at high temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Advanced Sensor Technologies Research · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Siddaganga Institute of Technology

Council of Scientific and Industrial Research-National Aerospace Laboratories

References (35)

Show source-provided references
1. Yang S, Zhong J, Sun B, et al. Influence of base pressure on property of sputtering deposited ITO film. J Mater Sci. 2019;30:13005–130012.
2. Yadav BC, Agrahari K, Singh S, et al. Fabrication and characterization of nanostructured indium tin oxide film and its application as humidity and gas sensors. J Mater Sci. 2016;27:4172–4179.
3. 10.1016/j.tsf.2010.04.11610.1016/j.tsf.2010.04.116 ↗
4. 10.1016/j.jascer.2016.01.00110.1016/j.jascer.2016.01.001 ↗
5. 10.1007/s40097-015-0177-710.1007/s40097-015-0177-7 ↗
6. 10.1063/1.146511510.1063/1.1465115 ↗
7. Atabaev IG, Hajiev MU, Pak VA. Growth of ITO films by modified chemical vapor deposition method. Int J Thin Films Sci Technol. 2016;16:13–16.
8. 10.1016/j.jnoncrysol.2005.11.08810.1016/j.jnoncrysol.2005.11.088 ↗
9. Her SC, Chang CF. Fabrication and characterization of indium tin oxide films. J Appl Biomater Funct Mater. 2017;15:170–175.
10. 10.3938/jkps.53.158010.3938/jkps.53.1580 ↗
11. 10.1007/s10853-010-4517-110.1007/s10853-010-4517-1 ↗
12. 10.1002/tee.2249410.1002/tee.22494 ↗
13. 10.1016/S0921-5107(00)00477-310.1016/S0921-5107(00)00477-3 ↗
14. 10.1002/pssa.20088178110.1002/pssa.200881781 ↗
15. 10.1016/j.apsusc.2007.05.03210.1016/j.apsusc.2007.05.032 ↗
16. 10.12785/ijtfst/02030210.12785/ijtfst/020302 ↗
17. 10.1063/1.510070810.1063/1.5100708 ↗
18. 10.1023/A:100473330580410.1023/A:1004733305804 ↗
19. Pokaipisit A, Horprathum M, Limsuwan P. Effect of films thickness on the properties of ITO thin films prepared by electron beam evaporation. Kasetsart J Nat Sci. 2007;261:255–261.
20. Li J, Jiang Z, Lin P, et al. Annealing effect on indium tin oxide thin films by DC magnetron sputtering for alkali vapor cell heating. Mod Phys Lett B. 2019;33(16):1–11
21. 10.1016/j.apsusc.2014.04.04210.1016/j.apsusc.2014.04.042 ↗
22. 10.1016/j.apsusc.2017.02.10610.1016/j.apsusc.2017.02.106 ↗
23. 10.1007/s40094-015-0187-310.1007/s40094-015-0187-3 ↗
24. 10.1088/0268-1242/19/6/00610.1088/0268-1242/19/6/006 ↗
25. 10.4028/www.scientific.net/KEM.675-676.24910.4028/www.scientific.net/KEM.675-676.249 ↗
26. Hamzah NA, Asri RIM, Ahmad MA, et al. Effect of post-annealing in oxygen environment on ITO thin films deposited using RF magnetron sputtering. J Phys. 2020;1535(012036): 1-7
27. 10.1016/j.tsf.2006.11.11310.1016/j.tsf.2006.11.113 ↗
28. 10.1016/S1003-6326(19)65164-210.1016/S1003-6326(19)65164-2 ↗
29. Yang S, Zhong J, Sun B, et al. Influence of base pressure on property of sputtering deposited ITO film. J Mater Sci. 2019;30:13005–13012.
30. 10.1016/j.vacuum.2004.01.08110.1016/j.vacuum.2004.01.081 ↗
31. 10.1016/0040-6090(72)90188-510.1016/0040-6090(72)90188-5 ↗
32. 10.1002/ppap.20093210110.1002/ppap.200932101 ↗
33. 10.1016/j.sna.2007.01.01210.1016/j.sna.2007.01.012 ↗
34. 10.1109/INEC.2016.758945610.1109/INEC.2016.7589456 ↗
35. 10.1016/j.mssp.2013.12.01710.1016/j.mssp.2013.12.017 ↗