journal article·2022-07-29

Synthesis of dispensable PDMS/Al2O3/GO thermal gap filler and performance comparison with commercial thermal gap fillers for electronics packaging applications

Vigneshwarram Kumaresan, Srimala Sreekantan, Mutharasu Devarajan, Khairudin Mohamed

Materials Technology· Volume 37· Issue 9
Publisher page

Abstract

In response to the critical needs of high power density, advanced thermal gap fillers (TGF) are required for the long-term reliability of electronics packaging. In this study, dispensable thermal gap filler (Al87GO6) with 87 wt.% Al2O3, 6 wt.% graphene oxide and 7 wt.% polymers were fabricated as two parts (Part A and Part B). The thermal conductivity of cured Al87GO6 (3.87 W/m.K) was 1.03, 1.11 and 1.24 times higher than commercially available thermal gap fillers TGF A, TGF B and TGF C, respectively. Part A and Part B components of Al87GO6 TGF exhibit a higher plateau value of zero shear viscosity. The lightweight graphene oxide has significantly reduced Al87GO6 TGF’s density by ~30–48%. The dielectric constant of Al87GO6 TGF was around ~6–17% lower than commercial TGF. Hence, the fabricated Al87GO6 TGF can be used as an alternative TGF for efficient heat dissipation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal properties of materials · Tribology and Wear Analysis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Malaysia

Materials Centre of Excellence (MCoE), PTDI, Western Digital Corporation, Batu Kawan, Malaysia

School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Malaysia

Funding

WDC-USM

References (43)

Show source-provided references
1. Miraglia C. Compression Characteristics of thermal interface gap filler materials; USA.
2. Bunyan MH, Fe VS, Fully-Cured JB Thermally or electrically conductive form-in-place gap filler. US 2012/0133072 A1, 2012.
3. Yamazaki T, Tsutomu Kashiwagi MW Addition-curable silicone resin composition and deattach material for optical semiconductor device. Us 2016/0251482 A1, 2016.
4. Tsuji K. Thermal conductive silicone composition. US 2019/0275755 A1, 2018.
5. Zhang L, Zhang K, Ling Shen YQL Gel type thermal interface materials. US 2018/0030328 A1, 2018.
6. 10.1002/pat.428010.1002/pat.4280 ↗
7. 10.1016/j.progpolymsci.2016.03.00110.1016/j.progpolymsci.2016.03.001 ↗
8. Yang Y · Molecules · 2019 · 24
9. 10.1016/j.compscitech.2017.09.03210.1016/j.compscitech.2017.09.032 ↗
10. 10.1016/j.compositesb.2013.10.03910.1016/j.compositesb.2013.10.039 ↗
11. 10.1016/j.compscitech.2020.10818310.1016/j.compscitech.2020.108183 ↗
12. 10.1016/j.applthermaleng.2019.01.02910.1016/j.applthermaleng.2019.01.029 ↗
13. Qiuhong M · Polym Compos · 2007 · 126
14. 10.1016/j.tca.2012.03.00210.1016/j.tca.2012.03.002 ↗
15. 10.1016/j.compositesa.2015.02.01110.1016/j.compositesa.2015.02.011 ↗
16. 10.1021/acsami.5b0786610.1021/acsami.5b07866 ↗
17. Xiaoxiang H · Polym Composites · 2020 · 1
18. 10.1039/C9TC06968B10.1039/C9TC06968B ↗
19. 10.1016/j.coco.2019.12.00410.1016/j.coco.2019.12.004 ↗
20. 10.1021/cm504550e10.1021/cm504550e ↗
21. 10.2172/115065710.2172/1150657 ↗
22. 10.1039/C8CS00963E10.1039/C8CS00963E ↗
23. 10.1007/s11705-016-1586-y10.1007/s11705-016-1586-y ↗
24. Anwer AAW · 2017 · 166
25. 10.3139/217.333410.3139/217.3334 ↗
26. Kumaresan V · J Mater Sci Mater Electron · 2020
27. 10.1080/00218464.2020.186076510.1080/00218464.2020.1860765 ↗
28. Gao W Graphite Oxide: structure,Reductionand Applications, RICE UNIVERSITY, 2012.
29. Wypych G · 2016
30. 10.1016/j.mser.2018.06.00210.1016/j.mser.2018.06.002 ↗
31. 10.1016/j.tca.2004.12.02410.1016/j.tca.2004.12.024 ↗
32. 10.1016/j.nanoms.2019.02.00410.1016/j.nanoms.2019.02.004 ↗
33. Mu X · Sci Rep · 2014 · 4 · 1
34. Li A · Polymers (Basel) · 2017 · 9 · 1
35. Permal A · Polym Polym Compos · 2008
36. Paroline G · 2016
37. Understanding the Rheological Characteristics of Thermoplastic Polymers;TA Instruments, 2004.
38. 10.1016/j.ceramint.2007.08.00710.1016/j.ceramint.2007.08.007 ↗
39. 10.1111/j.1551-2916.2012.05181.x10.1111/j.1551-2916.2012.05181.x ↗
40. 10.1080/00218464.2014.89351010.1080/00218464.2014.893510 ↗
41. 10.3390/polym1011125410.3390/polym10111254 ↗
42. 10.1063/1.156746010.1063/1.1567460 ↗
43. 10.1016/j.solidstatesciences.2019.05.01310.1016/j.solidstatesciences.2019.05.013 ↗