journal article·2022-03-01Open access

Comparison of spinning trajectory designing methods for products with noncircular cross-section

Marcin Majewski, Tomasz Gądek, Leszek Klimek, Łukasz Nowacki

Materials Science-Poland· Volume 40· Issue 1

Abstract

Abstract This article provides information about comparative research on designing of spinning trajectories for products with a non-circular cross-section. Generation of two outlines for the two mandrels was carried out using three methods: (1) a spreadsheet, (2) a 2D CAD program, and (3) a 3D CAD program. Technological tests were carried out using mandrels with the following geometries: ellipse and square. The material used in the research was aluminum Al 1050A. Due to the high degree of complexity in the design of the trajectory, Method 1 was used only for spinning of the ellipse. Methods 2 and 3 were used for spinning the square. Only Method 3 was suitable for programming of upsetting moves of tool. Test of Vickers's microhardness was conducted on sample 3. The influence of the spinning trajectory on the drawpiece was evaluated by measuring the percentage reduction of side wall thickness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Łukasiewicz Research Network – Poznań Institute of Technology , 6 Ewarysta Estkowkiego Street , Poznań , Poland

Institute of Materials Science and Engineering, Faculty of Mechanical Engineering , Lodz University of Technology , 1/15 Stefanowskiego Street , Łódź , Poland

References (24)

Show source-provided references
1. Runge M. Spinning and flow forming: spinning and flow forming technology, product design, equipment, control systems. Radevormwald: Lippert Druck GmbH; 1993.
2. Grainger JA. The flow turning of metals. Eastbourne and London: The Machinery Publishing Co. Ltd.; 1969.
3. Meshcherin VT. Listovaya Shtampovka. Moskva: Mashinostroyenie; 1975.
4. Arai H. Force-controlled metal spinning machine using linear motors. Proc IEEE Int Conf Robot Autom. 2006;2006:4031–6. https://doi.org/10.1109/ROBOT.2006.1642321.10.1109/ROBOT.2006.1642321 ↗
5. Shimizu I. Asymmetric forming of aluminum sheets by synchronous spinning. J Mater Process Technol. 2010;210:585–92. https://doi.org/10.1016/j.jmatprotec.2009.11.002.10.1016/j.jmatprotec.2009.11.002 ↗
6. Jia Z, Han Z, Liu B, Xiao Y. Work hardening of non-axisymmetric die-less spinning. J Mech Eng. 2017;63:111–8. https://doi.org/10.5545/sv-jme.2016.3589.10.5545/sv-jme.2016.3589 ↗
7. Jia Z, Han ZR, Liu BM, Fan ZJ. Numerical simulation and experimental study on the non-axisymmetric die-less shear spinning. Int J Adv Manuf Technol. 2017;92:497–504. https://doi.org/10.1007/s00170-017-0172-x.10.1007/s00170-017-0172-x ↗
8. Awiszus B, Härtel S. Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng. 2011;5:605–12. https://doi.org/10.1007/s11740-011-0335-9.10.1007/s11740-011-0335-9 ↗
9. Sugita Y, Arai H. Formability in synchronous multipass spinning using simple pass set. J Mater Process Technol. 2015;217:336–44. https://doi.org/10.1016/j.jmatprotec.2014.11.017.10.1016/j.jmatprotec.2014.11.017 ↗
10. Polyblank JA, Allwood JM. Parametric toolpath design in metal spinning. CIRP Ann Manuf Technol. 2015;64:301–4. https://doi.org/10.1016/j.cirp.2015.04.077.10.1016/j.cirp.2015.04.077 ↗
11. Arai H, Gondo S. Oblique/curved tube necking formed by synchronous multipass spinning. Metals. 2020;10:733. https://doi.org/10.3390/met10060733.10.3390/met10060733 ↗
12. Loukaides EG, Russo IM. Toolpath generation for asymmetric mandrel-free spinning. Procedia Eng. 2017;207:1707–12. https://doi.org/10.1016/j.proeng.2017.10.926.10.1016/j.proeng.2017.10.926 ↗
13. Rentsch B, Manopulo N, Hora P. Numerical modelling, validation and analysis of multi-pass sheet metal spinning processes. Int J Mater Form. 2017;10:641–51. https://doi.org/10.1007/s12289-016-1308-5.10.1007/s12289-016-1308-5 ↗
14. Yaman K, Özcan M, Tekiner Z. Determination of the spinning parameters of AISI 304L stainless steel by using finite element method. J Fac Eng Archit Gazi Univ. 2018;33:299–311. https://doi.org/10.17341/gazimmfd.406802.10.17341/gazimmfd.406802 ↗
15. Sedighi M, Jalili I, Kasaeian-Naeini M. Experimental study and FEM analysis of forward hot dieless spinning. Mechanics and Industry 2018;19. https://doi.org/10.1051/MECA/2018034.10.1051/meca/2018034 ↗
16. Music O, Allwood JM, Kawai K. A review of the mechanics of metal spinning. J Mater Process Technol. 2010;210:3–23. https://doi.org/10.1016/J.JMATPROTEC.2009.08.021.10.1016/j.jmatprotec.2009.08.021 ↗
17. Wang Q, Wang T, Wang ZR. A study of the working force in conventional spinning. In: Proceedings of the Fourth International Conference of Rotary Forming, 1989, pp. 103–8.
18. Kim JH, Park JH, Kim C. A study on the mechanics of shear spinning of cones. J Mech Sci Technol. 2006;20:806–18. https://doi.org/10.1007/BF02915944.10.1007/BF02915944 ↗
19. Hayama M, Murota T, Kudo H. Deformation modes and wrinkling of flange on shear spinning. Bull Japan Soc Mech Eng. 1966;9:423–33. https://doi.org/10.1299/JSME1958.9.423.10.1299/jsme1958.9.423 ↗
20. Quigley E, Monaghan J. Metal forming: an analysis of spinning processes. J Mater Process Technol. 2000;103:114–9. https://doi.org/10.1016/S0924-0136(00)00394-0.10.1016/S0924-0136(00)00394-0 ↗
21. Alberti N, Cannizzaro L, Lo Valvo E, Micari F. Analysis of metal spinning processes by the ADINA code. Comput Struct. 1989;32:517–25. https://doi.org/10.1016/0045-7949(89)90343-X.10.1016/0045-7949(89)90343-X ↗
22. Lu XY, Zhang S, Hou H, Li JZ, Zhou LX, Li ZQ. Three dimensional fe analysis on flange bending for TC4 alloy during shear spinning. J Mater Sci Technol. 2006;22:855–9.
23. Zhan M, Yang H, Zhang JH, Xu YL, Ma F. 3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning. J Mater Process Technol. 2007;187–188:486–91. https://doi.org/10.1016/j.jmatprotec.2006.11.114.10.1016/j.jmatprotec.2006.11.114 ↗
24. Xia QX, Lai ZY, Long H, Cheng XQ. A study of the spinning force of hollow parts with triangular cross sections. Int J Adv Manuf Technol. 2013;68:2461–70. https://doi.org/10.1007/s00170-013-4847-7.10.1007/s00170-013-4847-7 ↗