journal article·2025-03-01Open access

Bonding mechanism between the AlN ceramic matrix and the copper-based metal cladding layer

Song Wang, Hao Lu, Fengyuan Shu, Xin Zhang, Guibian Li

Materials Science-Poland· Volume 43· Issue 1

Abstract

Abstract High-temperature brazing and laser cladding methods can form a good metallurgical bond between ceramics and copper cladding. Herein, through these two methods, the preparation of a Cu-based metal cladding layer on the surface of aluminum nitride (AlN) ceramics was carried out. Scanning electron microscopy, X-ray diffraction, energy-dispersive spectroscopy, and other characterization techniques were employed to observe the macroscopic and microscopic morphologies, elemental distribution, and microstructure characteristics of Cu-based metal coatings and transition layers, in order to analyze the interface bonding mechanism. Research has found that the active element titanium (Ti) has a significant promoting effect on the wettability of Cu powder on the surface of ceramics. Metallurgical reactions occur at the interface between ceramics and Cu-based metal coatings. Al and N elements in ceramics react with most of the Ti in the metal coating and Cu in the molten metal also reacts with Ti, generating new compounds, thereby forming a metallurgical bond between ceramics and Cu coatings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Power Investment Group Yunnan International Power Investment Co., Ltd , Kunming , 650228 , China

School of Electrical Engineering, Xinjiang University , Urumqi , 830046 , China

School of Chemical Engineering and Technology, Sun Yat sen University , Zhuhai , 519082 , China

New Energy Technology Research Institute, State Power Investment Corporation Science and Technology Research Institute , Beijing , 102218 , China

Shanxi Fenglei Drilling Tools Co. Ltd. , Houma , 043001 , China

References (14)

Show source-provided references
1. Rubio-Marcos, F., Romero, J.J., Navarro-Rojero, M.G., Fernandez, J.F., Effect of ZnO on the structure, microstructure and electrical properties of KNN-modified piezoceramics, J. Eur. Ceram. Soc., 2009, 29(14): 3045–305210.1016/j.jeurceramsoc.2009.04.026 ↗
2. Comas, T.F., Diao, C., Ding, J., Williams, S., Zhao, Y., A passive imaging system for geometry measurement for the plasma arc welding process, IEEE Trans. Ind. Electron., 2017, 64(9): 7201–720910.1109/TIE.2017.2686349 ↗
3. Zhao, Y.X., Wang, M.R., Cao, J., Song, X.G., Tang, D.Y., Feng, J.C., Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler, Mater. Des., 2015, 76: 40–4610.1016/j.matdes.2015.03.046 ↗
4. Zhou, Y., Sun, Z., Electronic structure and bonding properties of layered machinable Ti2AlC and Ti2AlN ceramics, Phys. Rev. B., 2000, 61(19): 1257010.1103/PhysRevB.61.12570 ↗
5. Shu, F., Numerical simulation and experimental study on rapid preparation of copper coating on AlN ceramic surface [D]. Harbin Institute of Technology, Harbin, 2010 (In Chinese)
6. Liu, D., Chen, N., Song, Y., Song, X., Sun, J., Tan, C., et al., Mechanical and heat transfer properties of AlN/Cu joints based on nanosecond laser-induced metallization, J. Eur. Ceram. Soc., 2023, 43(5): 1897–190310.1016/j.jeurceramsoc.2022.12.030 ↗
7. Schreck, S., Rohde, M., Local modification of ceramic surfaces by a laser induced cladding process [C]. Conference on laser-based micro- and nanopackaging and assembly III; 20090128-29; San Jose, CA(US). Forschungszentrum Karlsruhe GmbH, Institute for Materials Research I, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein, Germany; Forschungszentrum Karlsruhe GmbH, Institute for Materials Research I, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein, Germany, 2009
8. Lei, J., Shi, C., Zhou, S., Gu, Z., Zhang, L.C., Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding, Surf. Coat. Technol., 2018, 334: 274–28510.1016/j.surfcoat.2017.11.051 ↗
9. Yang, Z.W., Zhang, L.X., Xue, Q., He, P., Feng, J.C., Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag-Cu-Ti active filler metal, Mater. Sci. Eng. A., 2012, 534: 309–31310.1016/j.msea.2011.11.074 ↗
10. Wang, J.X., Chuang, K.H., Wu, Y.C., Mechanical performances of AlN/Al metallized ceramic substrates fabricated by transient liquid phase bonding and pre-oxidation treatment, Ceram. Int., 2022, 48(12): 16619–1662910.1016/j.ceramint.2022.02.206 ↗
11. Zhao, J., Wang, X., Shu, F., Jiang, S., Ma, P., Zhao, Y., et al., Research on microstructure of copper coatings on AlN ceramic surface by laser cladding and brazing, Mater. Res. Express, 2020, 7(7): 07510410.1088/2053-1591/aba706 ↗
12. Xiong, L.D., Wang, C.J., Wu, W., Xu, L.J., Wang, C.M., Deng, H., et al., The surface softening mechanism of AlN ceramic by laser treatment, Surf. Interfaces, 2024, 46: 10402310.1016/j.surfin.2024.104023 ↗
13. Singleton, M.F., Nash, P., Binary alloy phase diagrams, 2nd ed. (Ed. T.B. Massalski), ASM International, Tennessee, USA, 1990
14. Zhang, M.H., Zhao, C., Bai, J.M., Hu, Z.Y., Cai, J.W., Zhang, Z.R., et al., Enhancing thermal conductivity of AlN ceramics via vat photopolymerization through refractive index coupling and oxygen fixation, Addit. Manuf., 2024, 95(5): 10452210.1016/j.addma.2024.104522 ↗